Special Repairs to Chitravad Outpost and Police Staff Qtrs. B-24 Block No-01 (First Floor Unit. no-06) & Block No.2 (Ground Floor Unit. No-14) in Jasapar Police line & Special Repairs to Police Station at Upleta Dist:- Rajkot (Including Electrification Work) (7th Attempt) (SBD)

Name of Work :- Special Repairs to Chitravad Outpost And Police Staff Qtrs. B-24 Block No-01 (First Floor Unit. no-06) & Block

No.2(Ground Floor Unit. No-14) in Jasapar Police line & Special Repairs to Police Station at Upleta Dist:- Rajkot( Including

Electrification Work)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable Rupees Fifty and Paisa

1 materilas and disposal of unserviceable materials with all lead and lift. 50.00 Sqm 50.94

Ninety Four Only

Dismantling existing plaster racking out joints and cleaning the surface for plaster at all

Rupees Twenty and

2 heights including disposal of rubbish to the dumping ground within of any lead. 131.00 Sqm 20.63

Paisa Sixty Three Only

Dismentaling of sheet roofing including ridges, Hips,Valleys, Gutters etc. stacking of

serviceable materilas and disposal of unserviceable materials with all lead and Rupees Fifty and Paisa

lift.(i)G.I.sheet roofing. Ninety Four Only

Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 coarse sand; 10 M/C stone Rupees Two Thousand

aggregates 40mm nominal size) and curing complete excluding cost of form work in Five Hundred Fifty One

Foundation and Plinth. and Paisa Fifty Seven

Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and Rupees Two Hundred

5 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 14.00 Sqm 220.04 Twenty and Paisa Four

coat of neat cement slurry AT GROUND FLOOR. Only

Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and Rupees Two Hundred

6 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 7.00 Sqm 247.76 Fourty Seven and Paisa

coat of neat cement slurry AT FIRST FLOOR. Seventy Six Only

Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and Rupees Two Hundred

7 finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating 37.00 Sqm 219.70 Nineteen and Paisa

coat of neat cement slurry AT GROUND FLOOR. Seventy Only

Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and Rupees Two Hundred

8 finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating 31.00 Sqm 249.50 Fourty Nine and Paisa

coat of neat cement slurry AT FIRST FLOOR. Fifty Only

Providing 20mm thick SAND FACED cement plaster on walls above ground level

consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick Rupees Three Hundred

9 finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height.(Gutka Plaster) 57.00 Sqm 327.45 Twenty Seven and Paisa

Fourty Five Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

Rupees One Thousand

orfixing on existing flooring by adhesive including dismentaling of existing flooring and

Seven Hundred Ninety

10 material jointed with color cement slurry including finised with flush pointing & cleaning 33.00 Sqm 1793.53

Three and Paisa Fifty

the surface etc.Completed Brand of the tiles shall be as per approved make list of

GSPHCL. Shade & Size of tiles shall be as specified in tender item.

Providing & Laying 24" x 24" in Skirting riser of steps and dado Double Charge

vitrified 8 to 10 mm thick tile over 10 mm thick Cement plaster of cement mortar 1:3 (1 Rupees One Thousand

cement: 3 coarse sand) jointed with color cement slurry including finised with flush Four Hundred Fourty

pointing & cleaning the surface etc. complete Brand of the tiles shall be as per approved Five and Paisa

make list of GSPHCL. Shade & Size of tiles shall be as specified in tender item. Nineteen Only

Providing & laying 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Rupees One Thousand

flooring by adhesive material including dismentaling of existing flooring and jointed with Four Hundred Fifty Eight

color cement slurry including finised with flush pointing & cleaning the surface etc. and Paisa Thirty Three

complete for antiskit Size-600 X 600mm Only

Providing & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers of Rupees One Thousand

steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & One Hundred Sixteen

13 jointed with white cement slurry. Size 300 x 600mm 16.00 Sqm 1116.32

and Paisa Thirty Two

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a coat

of steel primers of approved make and manufacture, M.S. frame shall be covered with

mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and 5mm

thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and Rupees One Thousand

14 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom 1.50 Sqm 1135.02 One Hundred Thirty Five

rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet beading on and Paisa Two Only

eighter side, and joined together with solvent cement adhesive,. An additional 5mm thick

PVC strip of 20mm width is to be stculk on the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction of Engineer in charge,

manufacture’s specification and drawing.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and fixing factory made polyvinyl chioride (PVC) door frame of the size 50 x

mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre

out of two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.s.

Square tubes. The two vertical door profiles are to be reinforced with 19 x 19 mm m.s.

square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out Rupees Three Hundred

15 the frame. The door frame shal be fixed to the wall using 65/100 mm long M.S. screws 1.50 Sqm 314.88 Fourteen and Paisa

through the frame by using PVC fasteners. A miniumum of 4 nos. os screws to be Eighty Eight Only

provided for each vertical members and minium 2 nos. for horizontal members etc.

complete as per manufactures specification and direction of Engineer in charge.

Removing and refixing after repairing door,window,cup board,ventilator shutter & Rupees Three Hundred

16 repair frame with providing necessary wood corner M.S. plate support,hinges 18.00 Sqm 321.78 Twenty One and Paisa

etc.complete. Seventy Eight Only

Providing and Laying Water Proofing Chemical treatment in two coats of vertical and

horizontal surface of DR Fixit SBR Latex or its equivalent as directed by engineer in Rupees Eighty Four and

charge.This treatment shall be carried out over & above China Mosaic Paisa Twenty Nine Only

Celling painting (two coats) with plastic emulsion paint and manufacture on undecorated

wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth With Applying two Rupees One Hundred

18 coats of Fine Putty & One coats of primer and manufacture on new wall surface to give an 110.00 Sqm 196.17 Ninety Six and Paisa

even shade including thoroughly brushing the surface free from mortar dropping and Seventeen Only

other foreign matter and sand papered smooth. paint, primer and putty shall be as per

approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint and manufacture on undecorated

wall surface to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth With Applying two Rupees One Hundred

19 coats of Fine Putty One Coat of Primer and manufacture on new wall surface to give an 331.00 Sqm 185.40 Eighty Five and Paisa

even shade including thoroughly brushing the surface free from mortar dropping and Fourty Only

other foreign matter and sand papered smooth.paint, primer and putty shall be as per

approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over

and above applying one coat of primer to give an required shape even shade after

throughly Brushing This surface to remove all Dirt and remains of loose poweder material Rupees One Hundred

20 etc. complete. Primer shall be exterior weather coat and Paint shall be Appex Weather 95.00 Sqm 155.21 Fifty Five and Paisa

Proof Emulsion Only Paint and primer shall be as per approved make list of GSPHCL. Twenty One Only

Painting Two coats (excluding priming coat) on previously painted steel and other

Rupees One Hundred

metal surface with enamel paint, brushing, to give an even shade including cleaning the

21 50.50 Sqm 102.41 Two and Paisa Fourty

surface of all dirt, dust and other foreign matter.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Painting Two coats (excluding priming coat) on previously painted wood and wood Rupees One Hundred

22 based surface with enamel paint, to give an even shade including cleaning the of all 29.00 Sqm 118.09 Eighteen and Paisa

dirt, dust and other foreign matter. Nine Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 )

PIPE having National Sanitation foundation ( NSF ) seal for potable water of following dia Rupees Two Hundred

23 nominal bore tube fitting and clamps including of making good the wall ceiling & floor etc. 14.00 Rmt 206.73 Six and Paisa Seventy

Complete (excavation of earth in trenches and filling will be paid separately)[B] 20 mm Three Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 )

PIPE having National Sanitation foundation ( NSF ) seal for potable water of following dia Rupees Two Hundred

24 nominal bore tube fitting and clamps including of making good the wall ceiling & floor etc. 23.50 Rmt 251.31 Fifty One and Paisa

Complete (excavation of earth in trenches and filling will be paid separately)[C] 25 mm Thirty One Only

Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 )

PIPE having National Sanitation foundation ( NSF ) seal for potable water of following dia Rupees Three Hundred

25 nominal bore tube fitting and clamps including of making good the wall ceiling & floor etc. 35.00 Rmt 334.89 Thirty Four and Paisa

Complete (excavation of earth in trenches and filling will be paid separately)[D] 32 mm Eighty Nine Only

Providing and fixing U.PVC/SWR nahni trap of the following nominal dia self cleaning

Rupees Five Hundred

design with top tile and strainer including cost of cutting and making good the wall and

26 1.00 No. 595.98 Ninety Five and Paisa

floors 100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali.

Ninety Eight Only

Providing and Fixing. S.W.Gully trap without C.I.grating brick masonry chamber & water Rupees One Thousand

tight C.I.cover frame of 300mm x 300mm size (inside) with standard weight (I) square One Hundred Seventy

27 mouth trap 150mm x 100mm size of 'P' or 'S' type. 1.00 No. 1176.94

Six and Paisa Ninety

Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric

sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces

(Double Wall) for non-pressure underground Sewerage & Drainage application as per

EN:13476-3 including all local and central taxes, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to the departmental stores etc.

complete. (100mm ID Dia) Including Lowering, laying and jointing of class SN

structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Rupees Two Hundred

28 Piping and fittings with the help of coupler ( on line / off line ) attached with one end of 3.00 Rmt 229.00

Twenty Nine Only

pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of

the corrugation at the spigot end, lowering the same into the trench, laying on the lower

bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Rupees Six Hundred

29 2.00 No. 656.86 Fifty Six and Paisa

Eighty Six Only

Providing & Fixing 15mm One way BIB Tap with wall flange Rate are inclusive of all

material ,Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Rupees Nine Hundred

30 Specifications and as per the instruction of Engineer incharge. The model & Make of bib 15.00 No. 990.61 Ninety and Paisa Sixty

tap shall be as per the approved Make List of GSPHCL One Only

Providing and fiixng water closet squatting pan (ORISSA TYPE W.C. PAN) size 580 mm

Rupees One Thousand

first quality including necessary 'P' or 'S' trap including jointing the trap with pan & soil

Three Hundred Fifty

31 pipe in cement mortar 1: 1 (1 cement : 1 sand ) in vitreous china white colour. 1.00 No. 1354.44

Four and Paisa Fourty

Providing and fixing Wash Basin shall be as per the approved Make List of GSPHCL

single hole for piller tap with C.I or M.S. brackete painted white including cutting holes

and making good the same but including fitting (A) Vitreous chaina :(II ) Flat back wash

basin 515mm x 410mm size in white colour including provinding and fixing C.P. brassa Rupees Three Thousand

waste coupling 32mm dia P.V.C water pipe M. I . fisher union 32mm dia C.P brass Pillar Nine Hundred Thirty Five

32 Cock 15mm dia shall be as per the approved Make List of GSPHCL Complete including 2.00 No. 3935.33

and Paisa Thirty Three

PVC connection pipe from STOP COCK Heavy Duty with Exposed part and other Only

accessories 15mm dia shall be as per the approved Make List of GSPHCL to pillar tap

and 32mm dia waste pipe up to N.T etc. Complete. with 40mm dia c.p brass waste and

M.I fisher and 15mm dia pillar cock.

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling

with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Rupees Two Thousand

33 Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specification 1.00 No. 2098.98 Ninety Eight and Paisa

Ninety Eight Only

Constructing brick masnory chamber for under ground C.I.Inspection chamber and bends

with Brick having crushing strength not less than 35 Kg/Sq.cm.in cement mortar 1:5,RCC

top slab with1:3:6 in cement mortar 1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C.

top slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal

size) foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth with a Rupees Three Thousand

floating coat of neat cement on walls & bed concrete etc. complete. Rate are also Seven Hundred Ninety

inclusive of outside plaster 15mm thick in C.M 1:3 from top of chamber and all side upto Three and Paisa

45cm deep below ground level (I) inside dimensions 455mm x 610mm and 450mm deep Eighteen Only

for Single or multi purpose pipe line. Rate Also Inclusive RCC Frame with cover MD

ton (Rubber mould Finish) Inner Size 600 x 450mm with all necessary fittings

Extra over above item for every additional depth of 0.1mtr. or part thereof beyond 450mm

Rupees Two Hundred

depth for Brick masonry chamber.

35 2.00 No. 239.99 Thirty Nine and Paisa

Ninety Nine Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing,fabricating and fixing of M.S. grill/Gate of approved pattern fabricated from

M.S.flat , square bars, round bars,C-channel, box pipe as per detail Drawings.Rate is

inclusive of welding with grinding smooth surface ,two coat of Oil paint and one coat of Rupees Seventy Three

36 yellow Zink chromate primer coat of approved brand only.Oil paint shall be Luxol Enamel 254.00 Kg. 73.94 and Paisa Ninety Four

paint of Berger Paint India Ltd. or Asian paint Apcolite premium gloss Enamel of Asian Only

paint or Dulux premium gloss enamel of Dulux paint Only M.S. grill/Gate material

Structural steel should be ISI Mark only.

Provinding and Fixing Steel Cupbord Shutter with frame (18 Gauge) of required size

including one coat of primer and two coat of oil painting etc complate with loking Rupees Eight Thousand

37 arranjment, handles etc complete for all floor. 26.00 Sqm 8030.73 Thirty and Paisa

Seventy Three Only

Providing and fixing corrugated asbestos cement sheets roofing fixed with G.l. plain

Rupees Two Hundred

and bitumen washers complete cost of purlins, rafters and trusses 7mm thick

38 78.00 Sqm 271.40 Seventy One and Paisa

corrugated Asbestos Sheet (lSI) includingmaking good to the base frame structure

as and when necessary.

39A Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC

insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth continuity in

FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner complete with approved make 5/6 Amp. ISI Rupees Four Hundred

make modular type switch and accessories mounted in 20 G. G.I. company fabricated metallic / 6.00 Point 425.00

Twenty Five Only

PVC / Acrylic box covered with appropriate front plate modules erected flushed with wall / ceiling

with necessary modular lamp holder / modular ceiling rose / HD Connector (make & model

approved by EIC and matching colur with switches accessories) as directed for open wiring.

Light point. Cat.-II.

Length of point wiring must not increase than 10 mtr. For that necessary switch boards and their

locations must be finalised before execution by agency otherwise payment will not be done for

extra long point. (For future extention, if required, agency has to erect one higher size metal box

and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item)

For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type Rupees Six Hundred

Electronic fan regulator both having ISI mark) Cat.-II Twelve Only

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II Rupees Four Hundred

Fifty Five Only

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark ) Cat.-II. Rupees Two Hundred

Thirty Four Only

40 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed

Rupees Twenty Four

with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains 60.00 Mtr. 24.00

with necessary fittings and junction boxes for following dia. 20 mm. dia.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

41A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA

approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish

wire to draw mains laid in approved manner with plastering by cement mortar & finishing the

surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity. 100.00 Mtr. 56.00 Rupees Fifty Six Only

(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains

with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code.

(Conductor resistance should be as per IS:8130/1984)

41B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi

Rupees One Hundred

stranded conductor for earthing as per standard colour code. (Conductor resistance should be as 60.00 Mtr. 140.00

42 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Rupees Thirty and

Paisa Ninety Five Only

43 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS

wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on/in wall/slab along

with continuous G.I. fish wire to draw wires and laid in approved manner complete with 16 Amp Rupees Six Hundred

Modular type Swich and accessories mounted in 20 G. GI company fabricated metallic / PVC /

Seventy Eight Only

Acrylic box covered with appropriate front plate modules erected flushed with wall. (a) 16 Amp.

Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly

both having ISI mark. Cat.-II.

44 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in

soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made

from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,

Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with

washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material minimum should be 26 kg.

1.00 Each 7025.00 Thousand Twenty Five

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth

and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit

all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

45 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in

earth pit (certificate for soil have to given by DEE / AE along with photographs) Rupees Two Hundred

Seventy Six Only

46 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage 0.2W to

0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Aluminum

exttusion having enough strength (Sample must be approved by EIC) With Polycarbonate diffuser

With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90 Rupees Three Hundred

(6) ATHD : Max. 15% Seventy Only

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) Approval will be given strictly subject to item

47 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting Rupees One Hundred

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser Eleven Only

suitable Lamp holder.

48 Poviding and erecting max.10 Watt LED battern having main housing aluminium extruded & front

cover of polycarbonate. Electrically & photomatry parameters are as under : 240V, 50 Hz., System

voltage : 10w ± 10% PF ≥ 0.95 , system lumens min. 1000, CCT;3000K to 6500K,CRl≥ 80, THD ≤

Rupees Three Hundred

15 % ,Delivery efficieny ≥ 85 %, LM 80 certified LED, 30000 hrs. @ L70, Electronic CC driver, 6.00 Each 309.00

insulated copper wire for internal wiring, IP 20, Operating voltage : 160 to 270 V , surge - 2 KV,

length of this fitting should be 2 ft. (Make and model approved by EIC only and strictly as per

specification only)

49 Providing and erecting Polycarbonet body surface mounting LED Bulk head type 9 watt Lighting

Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from

luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt Rupees Seven Hundred

driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with 2.00 Each 780.00

Beam Angle 120 deg.

50 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I,

Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating

Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM:

minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty

premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two

Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium Rupees One Thousand

body premium quality, Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15) 5.00 Each 1929.00 Nine Hundred Twenty

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No Nine Only

vibration and noise due to mechanical parts. (Agency has to erect safey wire with ceiling fan and

checked with EIC) (OEM has to approved model as per tender specification and tested at ERDA)

(Necessary test reports should be submitted strictly at the time of approval. Sample approved by

EIC subject to above specification only)

51 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with Rupees Ninety Eight

necessary hook of 10 mm M.S. Round Bar.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

52 Supplying & Erecting Decorative Ding Dong bell Stereo type 250 Volt complete erected on

Rupees One Hundred

existing polished wooden block or in M.S. box with 3mm thick white ISI mark laminated sheet. 2.00 Each 170.00

[Anchor (Chime model), vision, rider Make]

53 Providing & Erecting 3 mm thick Polycarbonate (PC) sheet with grooving as directed

500.00 Sq. Inch 3.00 Rupees Three Only

54 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve)

Rupees Three Hundred

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following 3.00 Each 327.00

capacity. For 40 Amp.

Twenty Seven Only

55 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly

powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following

Rupees Two Hundred

type of RCCB, RCCB + MCB [a] For 2 pole [Same company metal box used as MCB / ELCB 3.00 Each 272.00

used with earthing terminal with necessary Numbering / marking with oil Paint by painter]

Seventy Two Only

56 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant

indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of company fabricated

sheet box with powder coated inside and outside after apply seven tank chemical process of

CRCA sheet cover complete with suitable integral single piece construction tinned copper busbar

and link with all necessary interconnection and with necessary size MS frame for mounting

MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of 1.2 mm thick CRCA

Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having

D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make Rupees Four Thousand

neutral & Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess complete 2.00 Each 4906.00

Nine Hundred Six Only

with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar, detachable

gland plate, interconnections, powder painted including earthing etc. Single phase incoming and

horizontal single phase outgoing.

For 12 Way MCBDB: Including MCB DP 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA),

MCB 40 Amp. double pole switch (C curve) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 230 Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. & 25 Amp:

Nos.) (The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster) (Same

colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per site requirement and instructions given

by EIC on site. Font / number size given by EIC on site as per requirement]

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

57 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant

indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of company fabricated

sheet box with powder coated inside and outside after apply seven tank chemical process of

CRCA sheet cover complete with suitable integral single piece construction tinned copper busbar

and link with all necessary interconnection and with necessary size MS frame for mounting

MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of 1.2 mm thick CRCA

Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having Rupees Four Thousand

D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make 1.00 Each 4125.00 One Hundred Twenty

neutral & Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess complete Five Only

with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size

FRLS PVC insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar, detachable

gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 8 Way MCBDB: Including 1 no.

40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA

and breaking capacity of 10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable

to operate on 240 Volt A.C. power. (6 Amp to 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected

in line & level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site requirement and instructions given by EIC on

site. Font / number size given by EIC on site as per requirement]

58 Providing and erecting following type of Modular Type Accessories mounted with 20 G company

fabricated metalic box, single mounting base frame covered with textured / metallic front plate,

5.00 Each 16.00 Rupees Sixteen Only

modules erected with necessary connection. As desired by Engineer in charge.Blank Plate

Single. Cat.-II.

59A Point wiring for on board looped PLUG with tissino type single pole ISI marked Switch and Socket

erected with necessary connections erected on wooden /Metal/ PVC Box covered with 3 mm

4.00 Each 66.00 Rupees Sixty Six Only

thick PC(Polycarbonate) /Acrylic sheet for open / concealed wiring for following size.For 6 Amp.

59B For 16 Amp. Rupees One Hundred

60A Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. (1) One no Single 20.00 Each 31.00 Rupees Thirty One Only

pole 6 A Switch / Bell push

60B One no 3/5 pin 6 A Socket

15.00 Each 31.00 Rupees Thirty One Only

60C One no Single pole 16 A Switch Rupees Fourty Seven

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

60D One no 6/16 A Universal Socket Rupees Fourty Seven

60E One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with Rupees One Hundred

indicator & fuse Twenty Four Only

60F Bakelite ceiling, rose

25.00 Each 18.00 Rupees Eighteen Only

60G Bakelite lamp holder Rupees Twenty Two

60H Electronic Hum free EME Socket Type Steps Fan Regulator Rupees Two Hundred

61 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter

complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for

76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC

or wall bracket as per instruction of EIC having nuts and bolts for fixing the brackets and having

spread of Upto 0.50 mtr. length with suitable rise as per site condition and suitable welded stiffner

reducer and nipple with check nut complete painted with one coat of yellow zinc and two coats of

alluminium paint for Single arm bracket suitable for pole or terrace as per design given by EIC (a)

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj,

Valmont, Transrail, Ambica Only) (Test certificate to be submitted)

62 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire with

total consumption of Max. 45 W with single piece die cast aluminium housing, high power LED

shall be mounted on high quality metal core PCB with extremely precison designed heat sink

complete with IP66 protection Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM

Rupees Three Thousand

guidelines with LED module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided

1.00 Each 3512.00 Five Hundred Twelve

with high quality polycarbonate lenses for better light distribution. The watt capacity of each LED

must be ≥ 4 watt in streetlight fitting The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection against high and low Voltage cut

Off, opertional for high amibient and high humid envirnoments, THD of driver should be less than

Also the Fixture should meet the following technical criterias Oprating range Voltage 160 to 270 V,

system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integralThe

Separate Potted driver should have over current, over voltage protection, short circuit protection so

that the fixture recovers once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)

63 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper

wires of following size to be erected as directed. 3 core x 1.5 sq.mm. PVC insulated round 30.00 Mtr. 46.00 Rupees Fourty Six Only

copper wire ISI mark.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

64 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear terminals with

30.00 Each 8.00 Rupees Eight Only

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

65A Providing and Laying of Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

Rupees Seventeen

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor 300.00 Mtr. 17.00

starters & control wiring) with required size of copper lugs, nuts and bolts if required. One wire

65B One wire 2.5 sq. mm Rupees Twenty Seven

65C One wire 6.0 sq. mm

50.00 Mtr. 56.00 Rupees Fifty Six Only

65D One wire 16.00 sq. mm Rupees One Hundred

Fourty One Only

66 Supplying and fixing radium sticker or Painting the number and words for inventory

Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole, Rack,

Earthing, Pump, Door etc.) as may required with good quality of enamelled paint or fade proof,

weather proof, waterproof high quality vinyl radium sticker for indoor / outdoor application as 20.00 Each 2.00 Rupees Two Only

directed by engineer in charge. For one character 50 mm height.(The colour of sticker / paint

should be as per instruction given by EIC as per site requirement)

67 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all types along

with accessories etc. complete and handed over to dept. 100.00 Point 1.00 Rupees One Only

68 Dismantling the existing switchgears, DB and Busbar of any size complete with / without board or

2.00 Each 7.00 Rupees Seven Only

angle iron frame.

TOTAL Amount Rs….(A+B) =

TOTAL Amount Rs….(A+B) =

I/c Executive Engineer

Signature of the contractor. G.S.Police.Housing Corp.Ltd.