REPAIRS REPLACEMENT OF FLOORING DADO WOODEN AND ALUMINUM JOINERY TOILETS AND CERTAIN MISCELLANEOUS WORKS AT INS CIRCARS NOI ENC O MESS SAILORS INSTITUTE COMMAND SWIMMING POOL UNDER GE NB VISAKHAPATNAM

Amount

Demolition of un-reinforced cement concrete in any floors and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

Demolition of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

M & L for 25 mm thick (average), PCC 1:2:4, Type B0, using (12.5mm graded aggregate) as in make to slope in sunken floors / levelling course complete all as specified and as directed.

M & L for Coloured joint free Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. m but not exceeding 0.11 Sq.m, in skirtings/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick including dismantling of existing floor tiles and rubbish off debries to out of the MD land complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed or bedding layer of cement mortar 1:4, 15 mm thick including dismantling of existing floor tiles and rubbish off debries to out of the MD land complete all as specified and directed.

M&L for Glazed ceramic tiles 300 x 450 x 7mm thick, on vertical surfaces such as skirting, dados etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 and dismantling of existing floor tiles and rubbish off debries to out of the MD land complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles 300 x 200 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 and dismantling of existing floor tiles and rubbish off debries to out of the MD land complete all as specified and directed.

M&L for Vitrified ceramic tiles 10 mm thick (Square/ Rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq. M, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding layer in cement mortar 1:4, 15 mm thick for laying floor finishes over and including 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in sub base of floorings complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description of thickness laid dry and pointed in any mortar, in floors, aprons etc. comlete all as specified and as directed

M & L for machine cut Kota stone slab as in kitchen plateform, landing of staircase 20 to 25 mm thick laid over cement screed bed 20mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for machine cut Kota stone slab as in kitchen plateform, landing of staircase 20 to 25 mm thick laid over cement screed bed 15mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 20mm thick granite slab of any colour /shade, table rubbed and polished as in uinal partitions etc. of size 400mm X 1200mm both sides polished and exposed edges shall be half rounded and polished, fixed in wall in cement mortar (1:3) including pointing in white cement and marble dust mix (1:2) with admixer of pigment to match with the shade of granite complete all as specified and as directed.

M &L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match as in steps, jambs, pillars, window- cills, cooking platforms and like including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick with shade of granite complete all as specified and as directed.

M &L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match as in skirting/Dado over backing coat of 10mm thick in CM 1:4 with shade of granite complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sqm each and including re-fixing in same opening after carrying out neceessary repairs complete all as specified and directed. (Note : Butt Hinges changed if any with new butt hinges the same shall be paid separately under supply only under relevent Item).

Taking down shutters of any description area exceeding 1 Sqm but not exceeding 2 Sqm each including re-fixing in same opening after carrying out necessary repairs (Note : Butt Hinges changed if any with new butt hinges the same shall be paid separately under supply only under relevent Item).

Supply only 100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

Supply only 75 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt [ ISI marked ] with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs [ ISI marked ] 100 mm long aluminium, anodized or matt finished barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs [ ISI marked ] 200 mm long aluminium, anodized or matt finished barrel tower bolts of extruded section complete all as specified and as directed.

M & L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish to outside the premises, and depositing serviceable materials where directed and leaving the work site clear of any plastering complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash to match with the existing surfaces complete all as specified and directed.

M&L for Preparing newly plastered surfaces of ceilings and applying three coats of white wash to match with the existing surfaces complete all as specified and directed.

M&L for preparing newly or untreated plastered / putty surfaces of internal walls, and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

M & L for applying two coats of cement based wall care putty on walls / ceilings to obtain a smooth surface including making good any undulations on the surfaces complete all as spcidified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M & L for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of alkali resistant primer complete all as specified and as directed. Make : Super-Snocem / Durocem / Aquacem

M &L for 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded stone aggregate) in flooring/ hard standing and finishing the concrete surface even and fair without using extra cement complete all as specified and as directed.

M & L 75mm thick plain cement concrete type C2,1:3:6 using 40mm graded stone aggregate in plinth protection etc finished even and smooth without using extra cement complete all as directed.

M & L Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3 15mm thick, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified and as directed.

S&F in repairs for 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Taking down shutters of any description not exceeding 1.0sq.m. each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

S & F 35 mm thick second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and directed.

S&F 35 mm Flush shutters [ISI marked], solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35 mm thick Factory Made Second class hard wood Glazed and skeleton shutters [without sash bars], open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

S & F 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters [without sash bars], open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

S&F in repairs 125 mm long medium weight, cold rolled mild steel butt hinge complete all as specified and as directed.

S&F in repairs 100 mm long medium weight, cold rolled mild steel butt hinge complete all as specified and as directed.

S&F in repairs [ ISI marked ] 150 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs [ ISI marked ] 100 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs [ ISI marked ] 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repairs [ ISI marked ] 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt [ ISI marked ] with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S&F in repairs brass 40mm dia, cup board knobs fixed with nut, screw and washer of brass, bright finished complete all as specified and as directed.

Supply and fix in repairs [ ISI marked ]100mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap inser for top top rail & bottom rail .Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 61 and 62 : Make of PVC frame / shutter / ventilator shall be of make Sintex or equivalent in Nandi / Rajshri Plasti Wood.

S & F 125 mm long extruded Aluminium alloy anodised Butt hinges [ISI marked] with galvanized mild steel hinge pin type B 22 complete all as specified and as directed.

Supply and Fix in repairs [ ISI MARKED ]10 litres capacity PVC valveless, syphonic action type flushing cistern low level white or cloured with inlet, Ballvalve , Float Valve and handle including brackets complete all as specified and as directed . Make : SLIMLINE from PARRYWARE / HINDWARE / CERA

Supply & Fix in repairs Vitreous China Squatting pan of pattern long pan, size 580 mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

M&L in repair vitreous china wash hand basin , white, flat back size 550x 400 mm fixed in repairs including waste pipe, (hope of bore 32mm) waste coupling brakets, etc. complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F for Pillar taps, cast copper ally, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm dia bore iron pipe in repairs complete all as specified and as directed. Make : Make : M/s Hindware / Orient / Seiko / Dripless

S&F 15 mm bore Fancy type pillar taps, long swan neck type with quarter turn, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F Sheet glass 4mm thick, ordinary quality and glazing with and including anodised aluminium snap beading or rubber / reopren bead in squares not exceeding 0.5Sq.m in each pane, complete all as specified. Make: HINDUSTAN PILKINGTON GLASS / MODIGUARD.

S&F Sheet glass 4mm thick, ordinary quality and glazing with and including anodised aluminium snap beading or rubber / reopren bead in squares exceeding 0.5Sq.m in each pane, complete all as specified. Make: HINDUSTAN PILKINGTON GLASS / MODIGUARD.

S&F Sheet glass 8 mm thick, ordinary quality and glazing with and including anodised aluminium snap beading or rubber / reopren bead or with oil putty and glazing clips in metal frame second class hard wood beading in wooden frames in squares exceeding 0.5Sq.m in each pane, complete all as specified. Make: HINDUSTAN PILKINGTON GLASS / MODIGUARD.

Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash on walls complete all as specified and as directed.

Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash on ceilings complete all as specified and as directed.

Preparing old painted surfaces of steel of any description over 10cm width or girth and applying one coat of Synthetic enamel paint of any tint on steel surfaces complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

M & L for applying one or more coats of french polishing on surfaces of any description, width or girth incl cleaning and preparing old decorated surfaces complete all as speicfied and as directed. Make : Sheenlac / Naidu polish / Asian

M & L for applying a coat of cement based wall care putty on walls / ceilings to obtain a smooth surface including making good any undulations on the surfaces complete all as spcidified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Complete removal of existing treatment on walls complete all as specified and as directed.

M&L for preparing newly/old untreated plastered surfaces of internal walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

M&L for Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and as directed. Make Distemper : Asian / Nerolac / Berger ( All are 1st quality)

M&L for Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of ceilings complete all as specified and as directed. Make Distemper : Asian / Nerolac / Berger ( All are 1st quality)

M&L for Preparing old painted surfaces by washing, rubbing down and stopping of old painted surfaces and applying a coat of Plastic emulsion on surfaces of walls / ceilings complete all as specified and as directed. Make Distemper : Asian / Nerolac / Berger ( All are 1st quality)

Preparing old plastered surfaces of walls and applying one coat of weather proof Exterior emulsion paint of approved make and shade on surfaces of walls / ceilings complete all as specified and as directed . Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for applying two coats of weather proof Exterior emulsion paint of approved make and shade including preparation of surfaces as recommended by the manufacturer on surfaces of walls / ceilings of any complete all as spcified and as directed. Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for Complete removal of existing treatment on wall surfaces and applying texture finish on walls by applying a layer plaster of paris over a coat of primer and then applying texture of approved design over one coat of putty, upon drying of the texture surface apply two coats of satin paint complete all as specified and directed by the Engineer-in-Charge Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux .

Taking down aluminium window shutters n exc 1.5 Sqm each complete all as specified and as directed.

Taking down aluminium door/window shutters exc 1.5 Sqm and n exc 3 Sqm each complete all as specified and as directed.

S&F in repairs aluminium anodized curtain rod 20mm dia of any length with suitable brackets complete all as specified and as directed.

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and as directed as in repairs.

S & F Aluminium frame for doors, windows, ventilators, fixed partitions, door shutters etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F for Powder coated aluminium window / ventilator shutters, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 of 100mm long (2 no.), suitable handle (1 No.),sliding rollers, ets complete all as specified.

S & F Aluminium window and ventilator shutters, fixed type without sash bar with powder coating of any colour of minimum 50 micron thick,, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws,etc complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty/in aluminium sections in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL .

S & F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty/in aluminium sections in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL .

M & L 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters or fixed to aluminum frame work with rubber beading etc..complete all as specified and as directed. Make : Anchor / century ply board Industries Ltd. / Archid ply / Kitply / True wood / Green ply

S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg including taking down the existing fitting complete all as specified and as directed. Make : Godrej / Everite / Priya

S & F in repairs 100 mm, 4 Levers, Brass Mortice Lock, vertical Type of Godrej make complete all as specified and as directed.

S & F in repairs 100 mm, 4 Levers, Brass Mortice Lock, cylindrical Type of Godrej make complete all as specified and as directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

Fixing only 15 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., but including cost of specials fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed.

S & F 40 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

Fixing only 40 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., but including cost of specials fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed.

S & F 25 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

Fixing only 25 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., but including cost of specials fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed.

S&F in repairs 75mm PVC (SWR) floor trap, [ ISI MARKED ] plain with grating including jointing with solvent cement and taking out old one complete all as specified and as directed. Make : Supreme / Prince

S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Fancy type chromium plated 15 mm bore Angle / plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

S&F in repairs Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe, in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F in repairs Bib taps, cast copper alloy chromium plated with capstan head, screwed down, screwed for 15 mm dia bore iron pipe, in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F in repair, for Bib taps standard of PTMT any colour high pressure , screwed down and screwed for iron pipe bore dia 15mm ( Min wt 90gms) complete all as specified and as directed. Make : Water tec / Prayag

M&L for Brass chromium plated, angle cock, screwed fo 15 mm bore iron pipe fixed in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Hand Shower, Health Faucet with 1m long flexible tube, wall hook, non return valve fixed fo 15 mm bore iron pipe complete all as specified and as directed. Make: Cera / Hindware / Parryware

S&F in repairs 15mm bore brass spindle (Heavy) ,for bib tap / stop cock / pillar tap etc complete all as specified and as directed. Make : Plaza

M & L for PVC/Rubber washers suitable for bib taps/stop cocks of any dia, fixed in repairs complete all as specified and as directed.

Taking down existing unserviceable urinal sencer battery kit and re fixing with new one of branded make sencer to existing urinals , including necessary plumbing , welding, etc., all inclusinve necessary works complete all as specified and directed.

S&F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm, long between flanges complete all as specified and as directed.

S & F in repairs Vitreous Ware wash down water closet (Pedestal), white (ETWC) with cover and Mild steel chromium plated hinging device including making good disturbed floor surfaces for vitreous china white Europian type water closet with P or S trap complete all as specified and as directed. Make of WC :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repair EWC plastic closed seat cover to suit existing make, black or white or coloured , with MS chromium plated hinging device complete all as specified and as directed.

S&F in repairs PVC syphon kit (any type / any pattern ) suitable for 10 ltrs capacity 'Slimline' low level flushing cistern and make functional complete all as specified and directed.

S&F in repairs for 15mm bore, 45 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends complete all as specified and as directed.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, and fixing of Vitreous china urinal partition white of size 310x700 mm.complete all as specified and as directed. Make : M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Parry ware / M/s. Neycer Kemberg /M/s Cera ( All are 1st quality)

S & F in repairs Vitreous china urinal, full Stall type (flat back or corner wall type) of minimum size 465 x 355 x 265 mm white with grating and union for discharge pipe including taking down the existing urinal, providing and fixing plugs, bedding urinal and spreader valves against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F in repairs Vitreous China Ware white Urinal partition of size 310 X 700 mm terminating about 40 Cm above floor line fixing in cement mortar 1:3 with necessary clamping arrangements etc complete all as specified and as directed.

S & F in repairs Urinal spreader brass chromium plated suitable for 15mm pipe complete all as specified and directed.

S&F in repairs of floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.

S&F in repairs of floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 40 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking down the existing mesh and fixing new mesh with old beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets complete all as specified and as directed.

S&F in repairs, Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequivalent as listed in list of makesual flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equivalent as listed in list of makesual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and ·including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate chamlel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position complete incl taking down old grid complete all as specified and as directed.

S&F for 4 mm thick Asbestos Cement Plain building boards in ceilings, fixed to timber/ Aluminium frame work with screws complete incl three coats of white wash all as specified and directed

M & L for providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions complete all as specified ans as directed. Make : Saint Gobain / Gypsum India

M & L for applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed. Make for Plastic Emulsion paint : Asian / Nerolac / Berger ( All 1st quality)

M & L for applying two coats of cement based wall care putty on walls / ceilings to obtain a smooth surface including making good any undulations on the surfaces complete all as spcidified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M & L for grinding Marble/ Cuddapah/ kota/ Mozoic/ Shahabad floor/ dado with suitable grit size Carborandum stones, and tin oxide polishing including removal of black spots or any other faded spots on existing surfaces complete all as specified and directed.

M & L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. make Sintex / Nandi / Rajshri Plasti Wood.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as specified and directed. make Sintex / Nandi / Rajshri Plasti Wood.

S&F 2000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I including taking down complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S&F 1000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I including taking down complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S&F 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I including taking down complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S&F in repairs 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Water tec / Prayag

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Water tec / Prayag

S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Water tec / Prayag

S&F in repairs 40mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Water tec / Prayag

S&F in repairs Stainless steel railing as in Balcony / Passage, framed balusters, walk ways railings similar work con-forming Grade 304 SG including necessary fixing arrangements, welding etc., complete all as specified and as directed.

Material and Labour for 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and as directed. Make : Sunmica / Greenlam

M/S Jayalakshmi Constructions

S RAMAKRISHNA RAJU

SATYAMEGHA ENGINEERS

SRI SURYA SYNDICATE

RAVITEJA ENGINEERING WORKS

B ESWARA RAO

SRI SIMHADRI COMPANY

S A R CONSTRUCTIONS