Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹12.3 L+₹34,670.68 (2.89%)Rejected-Finance NOT AVAILABLE | L2 | Rejected-Finance Rejected | |
| 3 | L3₹13.1 L+₹1.1 L (9.57%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹13.3 L+₹1.4 L (11.3%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹13.7 L+₹1.7 L (13.9%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹14.1 L
EMD Value
₹28,300
Closing Date
30 Jan 2023, 10:30 amClosed
Executive Engineer
HP City Transport and Bus Stand Management And Development Authority Tutikandi Shimla -4
SH Construction of New Shop after dismantling of old Toilet Block
2023_BSMDA_67190_1
HPBSMDA/EE/(2)/2021Tenders Vol-III
Open Tender
Civil Works
Item Rate
90 days
Kangra
Please refer Tender Document
9 documents required · 9 mandatory
₹500
HP BSMDA Tutikandi Shimla-4
₹28,300
24 Feb 2023
16 Jan 2023
30 Jan 2023
18 Jan 2023
30 Jan 2023
18 Jan 2023
Amount
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :- Of area beyond 3 sq. (Three Square metre), including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm ( Thirty Centimeter) in depth, 1.5 m (One point five meter) in width as well as 10 sqm (Ten Square Meter) on plan including getting out and disposal of excavated earth lead upto 50 m (Fifty Meter) and lift upto 1.5 m, (One point five meter) as directed by Engineer-in-charge.All kinds of soil including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- 1:4:8 (One Cement isto four coarse sand isto eight graded stone aggregate 40 mm (Forty milimeter) nominal size including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement isto six coarse sand isto twelve graded stone aggregate 20 mm (Twenty milimeter) nominal size upto plinth level with Cement mortar 1:6 (One cement isto Six coarse sand) including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Centering and shuttering including strutting, propping etc. and removal of form for :- Lintels, beams, plinth beams, girders, bressumers and cantilevers. including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Edges of slabs and breaks in floors and walls Under 20 cm (Twenty Centimeter) wide .including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (One cement isto two coarse sand isto six graded stone aggregate 20 mm (Twenty milimeter) nominal size including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (One cement isto two coarse sand isto four graded stone aggregate 20 mm (Twenty milimeter) nominal size including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :- Cement mortar 1:6 (One cement isto six coarse sand) including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
15 mm (Fifteen milimeter) cement plaster on the rough side of single or half brick wall of mix : 1:6 (One cement isto six fine sand) including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement isto 1.5 (One point five ) coarse sand isto three graded stone aggregate 20 mm (Twenty milimeter) nominal size including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:- Thermo-Mechanically Treated bars of grade Fe-500D or more including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
6 mm (Six milimeter) cement plaster of mix :-1:3 (One cement isto three fine sand) including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and applying white cement based putty of average thickness 1 mm (One milimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Finishing walls with water proofing cement paint of required shade :- New work (Two or more coats applied @ 3.84 kg/10 sqm) including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement isto four coarse sand) 25 mm (Twenty five milimeter) thick,including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing ball bearing for rolling shutters including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Applying priming coat:- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works, including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :- Two or more coats on new work including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm (One hundred ten milimeter) diameter including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring onforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Bend 87.5° 110 mm bend including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Coupler 110 mm (One hundred ten milimeter) including , lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
SANJAY SHARMA
AMIT KATOCH
RISHI KUMAR TUTANIEA
Sunanda Construction Works
Amar Singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .