Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST AND APPROVED BY BOARD | |
| 2 | L2₹3.3 L+₹3,525 (1.09%)Rejected-Finance | L2 | Rejected-Finance SECOND LOWEST | |
| 3 | L3₹3.4 L+₹14,555 (4.49%)Rejected-Finance | L3 | Rejected-Finance THIRD LOWEST | |
| 4 | L4₹3.4 L+₹14,967 (4.61%)Rejected-Finance | L4 | Rejected-Finance FOURTH LOWEST | |
| 5 | L5₹3.5 L+₹21,884 (6.75%)Rejected-AOC VONIYERI H CHIRAKKODE | KOZHIKODE | KOZHIKODE | KERALA | L5 | Rejected-AOC FIFTH LOWEST |
| Sl No | Description | Qty | Unit | prajeesh L5 | PRASOON KV L2 | Marjan V K L1 | Sahanubhavan P K L4 | CK Ahamed L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00Maintenanace work | ||||||||
| 1.00 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 63.9 | sqm | 224.92 ₹14,372.39 | 174.29 ₹11,137.13 | 100 ₹6,390 Lowest | 180.37 ₹11,525.64 | 120.02 ₹7,669.28 |
| 1.00 | 15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above | 1.11 | cum | 3,874.89 ₹4,316.63 | 3,698.57 ₹4,120.21 | 2,000 ₹2,228 Lowest | 3,827.59 ₹4,263.94 | 2,650 ₹2,952.1 |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.35 | cum | 320.52 ₹434.3 | 288.74 ₹391.24 Lowest | 500 ₹677.5 | 298.81 ₹404.89 | 300.48 ₹407.15 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.2 | cum | 7,766.83 ₹1,576.67 | 7,413.41 ₹1,504.92 Lowest | 7,500 ₹1,522.5 | 7,672.01 ₹1,557.42 | 7,716.52 ₹1,566.45 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 807.49 | kg | 194.2 ₹1,56,814.56 | 185.36 ₹1,49,676.35 | 150 ₹1,21,123.5 Lowest | 191.83 ₹1,54,900.81 | 192.91 ₹1,55,772.9 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 372.22 | kg | 157.29 ₹58,546.48 | 150.14 ₹55,885.11 | 150 ₹55,833 Lowest | 155.38 ₹57,835.54 | 155.58 ₹57,909.99 |
| 1.01 | OD241449/2025-2026:12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:
12.51.1 Ridges plain (500-600 mm) | 11.6 | metre | 475.16 ₹5,511.86 | 453.55 ₹5,261.18 Lowest | 500 ₹5,800 | 469.37 ₹5,444.69 | 471.17 ₹5,465.57 |
| 1.01 | OD241450/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR ) | 138.24 | sqm | 485.17 ₹67,069.9 | 463.1 ₹64,018.94 Lowest | 600 ₹82,944 | 479.26 ₹66,252.9 | 522 ₹72,161.28 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 79.04 | sqm | 138.63 ₹10,957.87 | 132.33 ₹10,459.89 | 120 ₹9,485.28 Lowest | 136.93 ₹10,823.49 | 137.8 ₹10,892.26 |
Tender Value
₹3.8 L
EMD Value
₹9,532
Closing Date
30 Oct 2025, 6:00 pmClosed
ASSISTANT ENGINEER
LID AND EW SECTION KANNAPURAM GP
PRO No 181 BASIC INFRASTRUCTURE FACILITIES AND MAINTENANCE TO MCF BUILDING NEAR EDAKKEPPURAM VETERINARY HOSPITAL
2025_LSGD_812732_1
ET02/2025/AE/LSGD/KNPM/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
KANNAPURAM GP
Please refer Tender documents.
9 documents required · 9 mandatory
₹845
Yes
₹9,532
Yes
28 Nov 2025
22 Oct 2025
1 Nov 2025
22 Oct 2025
30 Oct 2025
22 Oct 2025
Amount
Maintenanace work
15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD241449/2025-2026:12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: 12.51.1 Ridges plain (500-600 mm)
OD241450/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR )
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD340866/2025-2026:Providing and fixing 150 mm UPVC square gutter pipe over GI Clamp of same profile @ 1 mtr C/C
50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend
10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
OD352472/2025-2026:Laterate dry masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size for foundation and basement including all cost of materials, labour charges etc. (Modified 50.6.7.1)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
PRASOON KV (BID ID -2417829)
CK Ahamed (BID ID -2418132)
Sahanubhavan P K (BID ID -2415788)
prajeesh (BID ID -2414514)
Bidder Name
CK Ahamed
prajeesh
PRASOON KV
Marjan V K
Sahanubhavan P K
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1358351.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.36 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
FORMOFTENDER181.pdf
Tender Documents • 0.25 MB
SBD181.pdf
Tender Documents • 0.96 MB
PRELIMAGT181.pdf
Tender Documents • 0.26 MB
AFFIDAVIT181.pdf
Tender Documents • 0.24 MB
BOQ_1358351.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .