NABARD RIDF - XXII -CONSTRUCTION OF KURUVILAMKODU RCB ACROSS PANAMARAM RIVER IN KABANI BASIN, PANAMARAM PANCHAYATH OF WAYANAD DISTRICT(PART-A)

Amount

APPENDIX -A - CONSTRUCTION OF REGULATOR CUM BRIDGE

2.2 : Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area

od22253/2017_2018/IA : RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

od22254/2017_2018/IA : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

12.1.4.A : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. <br> Hard Rock ( blasting prohibited) - Mechanical Means <br>

12.1.B.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. <br> Ordinary Soil - Depth upto 3m - Mechanical Means <br>

12.8.E.1.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 - Using Concrete Mixer

od22256/2017_2018/IA : DOWEL BARS - Supplying and Providing MS dowel bars of size 25 mm dia of 2.0m long (1m in rock and 1m in concrete ) including drilling holes of 30mm dia and filling the gap with cement grout( 0.50kg/each) etc complete

13.5.F.P.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - Using concrete Mixer - Height upto 5m

13.5.F.q.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - Using concrete Mixer - Height 5m to 10m

13.5.F.r.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - Using concrete Mixer - Height above 10m

12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

14.7 : Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, center to center spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.

14.16 : Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

14.1B.1.2.B : Furnishing and Placing Reinforced Cement Concrete Grade M25 Using Concrete Mixer as per drawing and Technical Specification.For T-beam & slab - Height 5m to 10m

14.4 : Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications.

14.2 : Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications

13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

14.18.2 : Providing & Fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification

14.9 : Drainage Spouts complete as per drawing and Technical specification

13.10 : Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.

13.14 : Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.

od22259/2017_2018/IA : Supplying and Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials,conveyance, labour charges etc. complete

APPEDIX -B -FORMING APROACH ROAD AND SIDE PROTECTION WORKS

3.17 : Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.

4.1.A.1 : Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 <br> Grading-I - Plant Mix Method

4.12 : Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a : Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

55.1.a : Providing, laying and rolling of open graded premix carpet of 20 mm thickness with 0.27 cum of 12 mm departmental aggregates premixed with 12.96 kg of bitumen per 10 sqm using penetration grade bitumen to required line, grade and level on a previously prepared base, after priming the existing surface with 5 kg of bitumen (VG 30) 10 sqm including mixing in a suitable plant, laying and rolling with a three wheel static roller of 80-100 KN capacity, finished to required level and grades,followed by a seal coat of 0.09 cum of 6 mm departmental aggregates premixed with 8.64 kg of bitumen per 10 sqm. <br> By Manual Means.

55.2 : Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.3 : Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

8.4.1 : Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. <br>90 cm equilateral triangle

12.1.B.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. <br> Ordinary Soil - Depth upto 3m - Mechanical Means <br>

12.8.1.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

od5883/2018_2019/IA : Plain cement concrete 1:4:8 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

od5592/2018_2019/IA : Plain cement concrete 1:3:6 nominal mix for sub structure with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

12.38.B.1 : Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specification<br> RCC Grade M25 - Using concrete Mixer <br>

od22258/2017_2018/IA : DR packing under foundation with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

13.5.F.P.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 - Using concrete Mixer - Height upto 5m

13.5.A : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications PCC Grade M15 - Height upto 5m

od57238/2019_2020/IA : Bored cast-in-situ M30 grade R.C.C. Pile using concrete mixer excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Pile diameter-800 mm

od22259/2017_2018/IA : Supplying and Providing weep holes using 75mm dia. PVC pipes working pressure 4kg /sq.cm including cost of materials,conveyance, labour charges etc. complete

od57240/2019_2020/IA : Bored cast-in-situ M30 grade R.C.C. Pile using concrete mixer excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Pile diameter-500 mm

9.3.A : Laying Reinforced cement concrete pipe NP4 / prestressed concrete pipe for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . 1000 mm dia

55.16 : Providing and fixing guard post<br>Providing and fixing guard post of size 200mmx200mm, 1400mm long, 800mm above ground level and 600mm below GL. casted in M20 Grade concrete reinforced with 4 nos of 8mm dia longitudinal bars and 6mm dia stirrups @ 100mm c/c, firmly fixed in position by means of foundation of size 0.5mx0.5mx0.7m in M15 grade concrete below ground level including painting 2 coats on exposed surface with synthetic enamel paint in alternate white & black band 20cm wide

od56719/2019_2020/IA : Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and prepration of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification group of two or more up to 50 tonne Group of two or more piles upto 50 tonne Safe capacityInitial test (Test Load 2.5 times the Safe capacity)

od56720/2019_2020/IA : Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and prepration of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification preparation of pile head or construction of test cap and dismantling of test cap aftertest etc. complete as per specification Single pile above 50 tonne and upto 100 tonne Safe capacity Routine test (Test Load 1.5 times the Safe capacity)

od56721/2019_2020/IA : Providing and filling in position bitumen mix filler of Proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic metre of coarse sand for expansion joints.

Mechanical works - Providing shutters to RCB 85.101 Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 Supply of MS round bar including cost of conveyance charges

od10981/2017_2018/MPH Supply of MS Bolts and Nuts

85.108 Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

od10983/2017_2018/MH Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in<br>correct position and alignment by welding SS Embedded parts in 304L Grade as per approved<br>specifications, drawings and directions of deptl officer at site including cost of all materials, labour, <br> welding,shearing, grinding etc,lead and lift, conveyance, incidental, handling charges etc

Supply of materials, fabrication,painting and errection of 05 nos of MS shutters( Size 12.00 x 3.50 0 m 85.101 Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 Supply of MS round bar including cost of conveyance charges

od10981/2017_2018/MH Supply of MS Bolts and Nuts

85.110 Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications,drawings and directions of departl officer at sIite including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.111 Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

85.112 Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site

Supplying and fixing of flat type rubber seal at the bottom side , angular type at outer vertical side and Bulbnose type rubber seal at the inner vertical side and flat rubber gasket (between splice plates) for shutters 85.116 Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.117 Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od10979/2017_2018/MH Supplying and fixing in correct position flat type rubber gasket confirming to IS 11855 to the gates excluding the cost of SS bolts and nuts all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

Supplying and fixing 300 mm dia cast steel thrust roller assembly for 05 nos of shutters 85.120 Supplying and fixing cast steel thrust roller assembly having 300mm Dia, 90mm tread width, SS(304) shaft and 22314E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

Supply of materials, fabrication,painting and errection of hoisting bridge, covers and frames of driving units & rope drum, ladder for 05 nos of shutters 85.101 Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 Supply of MS round bar including cost of conveyance charges

85.103 Supply of MS checquered plates including cost of conveyance charges

od10982/2017_2018/MH Supply of 32 mm dia GI pipes

od10981/2017_2018/MH Supply of MS Bolts and Nuts

85.124 Fabrication and supply of Hoisting bridge unit in structural steel confirming to IS2062Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc

od10985/2017_2018/MH Painting the exposed surface of the hoist and supporting structure with two coats of synthetic enamel paint conforming to IS 2932 with minimum film thickness of 25+/-5 micron per each coat over one coat of alkayed based micaceous iron oxide paint with minimum film thickness 65+/-5 micron over 2 coats of zinc phosphate primer with film thickness of 40+/-5 micron per coat so that the film thickness of all coats including priming coat not less than 175 micron over grit blasting the surface to class B standard of IS 14177 including cost of all material labour testing of paint, incidental charge, hire of T and P

85.136 Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supplying, stacking, errecting and trial run of rope drum hoisting Unit having 30T capacity for 05 nos of shutters including line shaft,wire rope, dial guage and all other accessories 85.134 Supplying and stacking of 30 Tonne capacity rope drum hoisting unit having 13.5 m lift at a hoisting speed of about 0.33 m/min(+/-10%) through pulley arrangements with 4 numbers of falls on either side with 22mm tested galvanized wire rope 6/36 construction, fibre core having breaking capacity 28848Kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 5HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 2 nos. of plummer blocks with bearings for line shaft supported at proper intervals and including cost of electro magnetic thruster brake assembly manual operating systems, electrical accessories like DOL starters, limit switch, main switches and other safety equipments as per drawings specifications and statutory requirements etc complete but excluding cost of wire rope

85.128 Providing Line shaft ,material : MS rolled/ forged steel

od10980/2017_2018/MH Cost of supplying and stacking 22mm tested galvanised steel wire rope 6/36 construction, fibre core having breaking<br>capacity 28848Kg tensile designation of 1770 confirming to IS2266-2002

85.125 Conveying and erecting in position the already supplied rope drum hoisting units (15T/ 20T/25T/30T) capacity on the hoisting bridge and correcting the alignment as far as possible manually as per the direction of departmental officer at site including cost of all labour, machinery, lead and lift and all incidental and conveyance charges etc complete

85.135 Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial run

od10984/2017_2018/MH Suppying and fixing Dial gauge assembly as per approved specifications including cost of all materials , labour , machinery and lead and lift ,incidental and conveyance charges etc. Complete

PAULOSE GEORGE CONSTRUCTION COMPANY PVT LTD