Fire fighting in connection with Construction of proposed 75000 litres capacity fire reservoir with pump room and fire protection system excluding fire fire detection system for Mother and Child Hub under Jalpaiguri Govt Medical College and Hospital

Amount

A. FIRE WATER PUMPIMG SYSTEM Supply, erection, testing & commissioning of Electrical Motor driven main pump, centrifugal horizontal type, with gland packing capable of deliver 2850 LPM at 88 MWC. The pump shall be coupled with TEFC motor of suitable KW with speed of 2900 RPM with all accessories and complete set shall mounted on common base frame. The quoted rate shall include fixing of coupling, coupling guard and foudation bolts etc. Civil foundation will be client's scope.

Supply, erection , testing & commissioning of diesel engine driven common stand by pump, centrifugal horizontal type with gland packing and capable to deliver 2850 LPM at 88 MWC. The pump shall coupled to suitable HP of Diesel Engine radiator water cooled type with speed of 1800 RPM with all accessories including diesel engine control panel and complete set shall be mounted on common base frame. Batteries & battery leadswith stand, fuel tank( for 4 hrs operation) with stand and gauge glass, fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if required), coupling guard and other standard accessories, RCC foundation(as recommended by manufacturer) and foundation bolts, etc, complete ( civil foundation shall be client's scope).

Supply, erection, testing & commissioning of electric motor driven Jockey Pump, horizontal, centrifugal type capable to deliver 180LPM at 88 MWC. The pump shall coupled to TEFC motor of suitable KW with speed of 2900 RPM with all accessories mounted on common base frame.

Supply, erection, testing & commissioning of compartmentalised common control panel for Electrical Motor driven pumps as per technical specification attached with this tender document. All components shall be housed in a common cubicals made of 16 swg. M.S. sheet with required stiffners(if required). The panel shall be powder quoted of approved colour both inside and out side. The pane shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height. The panel should have sufficient (min. 6 nos per pump set) NO / NC contacts for extending the status of fire pumps to the fire alarm panel.

Supply, laying, testing & commissioning of FRLS, PVC outer sheath, steel armoured, aluminium / copper conductor, 1100 Volt Grade power cables with gland etc. The cable shall be laid in tray / hume pipe / in trenches / on walls / floors etc as required. Cables laid out doors shall include the price of earth escavation providing brick and sand protection, refilling and compacting the earth. 3C x 90 sq.mm YFY for main pump

4C x 10 sq.mm YFY for Jockey Pump

12C x 1.5 sq.mm for Diesel Engine

2C x 1.5 sq.mm for instrumentation

GI earthing strips of 40mm x 4.5 mm thick, strips shall run on floor / ceiling / walls, from pump to control panel with necessary accessories as required.

25 Sq.mm single core multistrand copper cable shall be run on floor / ceilinh / walls, from the nearest earth bar to the pump control panel with necessary accessories as required.

Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set with ball valves and other accessories.

Supply and installation of Pressure switches, SPDT type, of suitable range for pump sets with ball valves and other accessories.

Supply and installation of Level switches of suitable range for pump sets with ball valves and other accessories.

Supply, erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface (For pumping system ) 250 mm NB x 6 mm thick

200 mm NB x 6 mm thk

Supply, installation, testing & commissioning of CI Gate Valve as pe IS:14846 (PN 16) with matching flanges complete with nuts & bolts. Size 200 mm NB

Size 150 mm NB

Size 80 mm NB

Size 65 mm NB

Supply, instaallation, testing & commisssioning of swinging type CI Non return Valve as per IS:5312(PN16 rating) with disc and SS hinges complete including matching flanges, nuts & bolts complete. Size 150 mm NB

Size 65 mm NB

Supply, installation, testing & commissioning of CI Globe Valve as per IS:778 complete including matching flanges, nuts & bolts complete. Size 100 mm NB

Size 50 mm NB

Size 25 mm NB (GM construction)

B. HYDRANT SYSTEM Supply, erection, testing of MS black steel pipe Heavy Grade conforming to IS : 1239Part - 1/3589 including all fittings viz. Elbows, tees, flanges, etc. reduces, clamps, included with joints complete with anticorrosive treatment to burried pipes by wrapping with two coats of 4mm thick PYPKOTE membrane applied over a coat of primer for external yard hydrant network. 150 mm NB

Supply, erection, fabrication, testing of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface (For hydrant system inside building & outside building to laid along with boundary wall) 150 mm NB

Supply and installtion of swinging type CI Non return Valve as per IS:5312 with flap and SS hinges complete including matching flanges, nuts & bolts confirming to IS 5312 Size 150 mm NB

Supply, installation, testing & commissioning of CI Gate Valve as pe IS:14846 (PN 16) with matching flanges complete with nuts & bolts. Size 150 mm NB

Providing & fixing Butterfly valve as per BS :5155 (Wafer type) matching flanges complete with nuts & bolts. 150 mm NB

Supply, installation of Globe Valves in Gun Metal Construction to IS: 778 with screwed ends 25 NB size

Supply, installation of automatic 25 NB Air Release Valve

Supply & installation of GM oblique type single headed Hydrant valve with 80 mm inlet and 63 mm outlet GM instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts complete.

Supply & installation of GM oblique type single headed Landing valve with 80 mm inlet and 63 mm outlet GM instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts complete.

Supply & installation of gunmetal branch pipe with 20 mm nozzle conforming to IS : 903 complete

Supply & installation of 63 mm dia rubberized reinforced rubber line hose pipe in 15 m length conforming to IS : 636 Type II ISI marked with gunmetal male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG copper wire complete

Supply & installation of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm)

Supply & installation of MS panel with glass front for shaft coverage fabricated from 16 SWG CRCA sheet with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (1500x600 mm)

Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer with 30 m long 20 mm dia rubber hose pipe with 10 kg/sq cm working pressure with GM self closing shut – off nozzle of 5 mm outlet fixed on wall with dash fasteners.

Supply & installation of Gunmetal 2 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet with built in check valve for fire brigade connection to fire riser (IS : 904) with one no. butterfly valve & NRV of 150NB size

Supply & installation of Gunmetal 3 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet with built in check valve for fire brigade connection to Hydrant Network (IS : 904) with one no. butterfly valve & NRV of 150NB size

Supply & installation of Gunmetal 4 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet without built in check valve for fire brigade connection to fire water reservoir (IS : 904) with one no. butterfly valve & NRV of 150NB size.

Supply & installation of Gunmetal Fire Brigade Draw out connection with necessary foot valve for reservoir.

Supply and installation of pressure gauge, 1/2 inch bottom entry, of suitable range for pump set with ball valves and other accessories.

C. AUTOMATIC SPRINKLER SYSTEM Supply, fabrication, erection & testing of MS black steel pipe Heavy grade conforming to IS : 1239/3589 including all fittings viz. Elbows, tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface 65 mm NB

Providing & fixing Butterfly valve as per BS :5155 (Wafer type) matching flanges complete with nuts & bolts. Size 65 mm NB

Providing & fixing Non return valve (Wafer type) with matching flanges complete with nuts & bolts. Size 100 mm NB

Supply & installation of Globe Valves in Gun Metal Construction to IS: 778 with screwed ends Size 40 mm NB

Supply & fixing of Sprinkler Head Pendent type

Supply & fixing of Installation Control Valve complete with trims & gong Size 150 mm NB

Supply, installation, testing & commissioning of CI Gate Valve as pe IS:14846 (PN 16) with matching flanges complete with nuts & bolts. Size 150 mm NB

D. SINAGES Supply and installation in position the "FIRE EXIT" Sign with luminicent colour having size 300 x 100 mm

Supply and fixing in position the signages " FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 450 x 300 mm. a. ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATION. b. EVACUATE THE OCCUPANTS BY USING FIRE EXIT AND EMERGENCY EXITS ONLY AND ASSEMBLE AT ASSEMBLY POINTS. c. BE CALM AND DO NOT GET PANIC, WALK DO NOT RUN d. IF POSSIBLE TRY TO EXTINGUISH FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER.

Supply and fixing signage with printed " IN CASE OF FIRE, DO NOT USE LIFT. USE STAIRS ONLY" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shaall be fixed at the height of 2 mtrs.from finished floor near Manual Call Point.

MAGNUM SAFETY INDIA

NILEX FIRE PROTECTION SYSTEMS