PROVN OF HARDSTANDING AND TWO GATES OF 11 RAPID (H) PRO UNIT AND PROVN OF BATHROOM AT NCC DTE LOGISTIC OFFICE AREA AT AHMEDABAD CANTT

Surface excavation n.exc 30cm deep & averaging 15 cm deep and getting out in soft/loose soil as specified.

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface as specified.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate all as directed.

M&L 100 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement all as specified.

M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with 50 mm sand filling under roof or below paver blocks incl. watering and consolidation complete all as specified.

M & L for Forming of 12mm thick Expansion joints in 100 mm thick cement concrete filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ all as specified.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing with Grade B compound all as specified.

M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

S & F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc , flat iron fillets ( for securing wire mesh/welded steel wire fabric etc ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for prepration of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete all as specified and directed.

S & F Framed work as in doors orgates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings of Fe-290 (Gde E-165) (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard/dense soil complete all as specified and directed.

M & L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified and as directed

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 400x400 mm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

All as per item no 15.00 above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc including taking down existing vantilator complete all as specified and directed.

M & L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface fair and even with out using extra cement complete all as specified and directed.(WPC measured and paid separately)

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished the plastered surface even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying wall putty to wall surface complete all as specified and directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE 410-W (Gde-E-250, Quality-A) complete all as specified.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified and directed.

S & F 30 mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

S & F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete all as all as specified and directed.

S & F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

S & F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S & F 150 mm size aluminium anodised door handles complete all as all as specified and directed.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as all as specified and directed.

S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 15 mm complete all as specified and directed.

S &F Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of bore dia 20 mm complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete all as all as specified and directed.

S & F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S & F in repairs health faucet spray type brass, chromium plated, and 1.5 m long PVC flexible pipe complete all as specified and directed.

S & F in repairs PTMT Swivel Shower rose, 15 mm dia ( Minimum wt 40 gms), complete all as all as specified and directed.

S & F in repair 15 mm stainless steel bore angle cock with flage chromium plated complete all as specified and directed.

S &F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl connecting pipes securing access covers etc complete all as specified.

S & F in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling and 32mm dia PVC waste pipe, complete all as specified and directed.

S & F in repair vitreous china bowl urinals flat back size 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement inclluding waste pipe complete all as all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) floor trap long body type with grating including jointing with solvent cement complete all as all as specified and directed.

Material & labour for 150 x 150mm size salt-glazed stoneware gully traps, square or round mouthed, type 'P' in repairs complete all as specified & directed.

S & F Bib tap cast copper alloy with crutch or butterfly handle screwed down, fancy type chromium plated screwed for 15 MM bore iron pipe or brass, ferrule & fixed complete all as specified & directed.

S & F Brass chromium plated fancy type towel rail 600 mm long, fixed in position complete all as specified & directed.

S & F Brass chromium plated fancy type soap dish holder, fixed in position complete all as specified & directed.

S & F 5.5 mm thick looking mirror size 600 x 450 mm with PVC frame of approved quality & make GE fixed in position with rawl plug and screws of appropriate size complete all as specified & directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light point/ceiling/exhaust fan controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red/Yellow/Blue, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and modular sunken box with top plate/ frame of same manufacture for one 16 amp socket outlet Modular type for controlled by one switch on independent board complete.

S&F modular switch one way 6 amp 1 module complete all as specified and directed.

S&F modular switch one way 16 amp 1 module complete all as specified and directed.

S&F modular socket 6/16 - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6 amp 5 pin ,2 module complete all as specified and directed.

S&F ceiling rose 6 amp, 3 terminals polycarbonate body complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:- 2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)

S & F In replacement of old unserviceable light fittings LED tube light fitting Integral 20watts LED Tube light fitting internally prewired and incl connecting up with two core wire of suitable size complete all as specified.

S & F In replacement of old unserviceable light fittings LED tube light fitting Integral 9/10watts LED Tube light fitting of 2feet long internally prewired and incl connecting up with two core wire od suitable size complete all as specified.

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 30 W as light source complete with LED 30 W 5700K including brackets of suitable size made out of GI pipe light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as spd and directed .

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed with protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter including making a square hole in wall of suitable size to fix fan complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

SP 6 to 32 amp.

SPN 40 amp.

Cutting existing steel tubing for alterations or additions of pipe size 40/50 mm bore and screwing complete all as specified and directed.

Supply and lay pipe galvanized, " Medium class", including fittings 20mm (3/4") dia complete all as specified and directed.

Supply and fix valve, globe conforming to IS 9338, 40/50 mm dia pipe complete all as specified and directed.

S&F 20mm dia, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.