DEMAND FOR REPAIR AND MAINTENANCE OF A FRAME 204 NOS AND B FRAME 217 NOS ((A FRAME 07 NOS FOR REPAIR AND MAINTENANCE, 197 NOS FOR MAINTENANCE) (B FRAME 04 NOS FOR REPAIR AND MAINTENANCE, 213 NOS FOR MAINTENANCE)) AT GE (ENGR PARK) SURATGARH

1. DEMAND FOR REPAIR AND MAINTENANCE OF ‘A’ FRAME 204 NOS AND ‘B’ FRAME 217 NOS {(‘A’ FRAME 07 NOS FOR REPAIR & MAINTENANCE, 197 NOS FOR MAINTENANCE) (‘B’ FRAME 04 NOS FOR REPAIR & MAINTENANCE, 213 NOS FOR MAINTENANCE)} AT GE (ENGR PARK) SURATGARH:- (a) Removing the above items from the existing stack and shifting the same to the site of work (approx distance 25 to 30 Mtr). (b) Cleaning the surface with emery paper, wire brush and cotton waste to make the surface free from dust and old material. (c) Test the acentric bolt and safety device for proper functioning and remove rust by 'K' oil wire brush and cotton waste and grease Frames. (d) Test the bollards adjustable for functioning and grease of Frames (e) Mixing thoroughly the araldite and hardener pig hy 88 in the ratio of 2:1 to make synthetic adhesive. (f) Apply the synthetic adhesive on the A and B frame with 3’’ brush smoothly. (g) Spreading the carborandum cubic brown AP type Grit (16) on the surface of the A and B Frame by sieve to cover the complete surface. (h) Apply mild pressure with wooden plank after removing extra grits to ensure even surface. (j) The A and B Frame will be kept undisturbed for seven days duly protected against moisture/rain. (k) Only the synthetic adhesive required for progress will be mixed and applied (l) Mixing of araldite & hardner will be done after the surface is well cleaned. (m) Synthetic materials will be applied within 30 to 45 minutes. (n) Aluminum welding at the places of cracked/broken portion of the body with suitable aluminum plates, welding rods and finishing, including preparation for welding and all as directed by BSO/GE. (o) After surfacing, stacking the same on proper dunnage as directed by the SK/BSO/GE. Note :- 2. The following materials will be supplied by the contractor for repair and maintenance:- (a) Hardener 0.355 Kg /‘A’ and ‘B’ Frame (Make Pidilite) x 421 Nos = 149.455 Kgs (b) Araldite 0.700 Kg/‘A’ and ‘B’ Frame (Make Pidilite) x 421 Nos = 294.700 Kgs (c) Carborandum 3.84 Kg per ‘A’ and ‘B’ Frame x 421 Nos = 1616.64 Kgs

PACHR BUILDERS

PACHAR BROTHERS

AUTO HOME

ANSH ENTERPRISES

HARDIK ENTERPRISES

PUNDIR ENTERPRISES

AMAR TRADING COMPANY

MANOJ SPARES AND SERVICE CENTER

BANSAL BROTHERS