SPECIAL REPAIR TO PATH, COMPOUND WALL AND FENCING UNDER GE AF NO2 AT AF STN JODHPUR

Surface excavation not exc. 30cm averaging 15 cm deep in any type of soil getting out complete all as specified and as directed by Engineer-in-Charge.

Removing surplus soil to a distance exc 250m but n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rolled to a true surface complete all as specified and directed by Engineer-in -Charge.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even, complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed.

M&L for Prepolished chequered cement concrete tiles with grey cement & pigment of size 30cmx30cmx22 to 25mm thick set & jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with grey cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces and applying one coat of weather coat (smooth classic, any colour as directed) with anti fungal exterior coating weather proof emulsion paint as specified and directed.

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in sides filling and mass concrete complete all as specified and directed by Emgr-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M & L for preparation of new undecorated plastered/concrete surface by rubbing down and applying two coat of synthetic enamel poaint over a coat of primer over 10cm girth or width,all as specified.