Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.7 LAccepted-AOC CHIRAPPATTU HOUSE THALACODE MULANTHURUTHY PIN 682314 | MULANTHURUTHY | ERNAKULAM | KERALA | 682314 | ₹2.7 L | 1 | Accepted-AOC AGREEMENT EXECUTED |
| 2 | Rejected-Technical | - | - | Rejected-Technical REJECTED |
| Sl No | Description | Qty | Unit | NIBIN ALEXANDER L2 | Taiju Kuriachan L1 |
|---|---|---|---|---|---|
| 1.00vocational training center | |||||
| 1.00 | OD398595/2024-2025::Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size,
design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone
aggregate, etc. all complete as per the direction of Engineer-in-charge. OD 80/21-22 | 17.5 | sqm | 995 ₹17,412.5 | 986 ₹17,255 Lowest |
| 1.00 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) | 0.14 | cum | 8,571 ₹1,199.94 | 8,492 ₹1,188.88 Lowest |
| 1.00 | 51.2.3:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | 0.88 | cum | 983 ₹860.13 | 974 ₹852.25 Lowest |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 2 | cum | 7,613 ₹15,226 | 7,543 ₹15,086 Lowest |
| 1.00 | 10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | 250 | kg | 202 ₹50,500 | 200 ₹50,000 Lowest |
| 1.01 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 40 | sqm | 243 ₹9,720 | 241 ₹9,640 Lowest |
| 1.01 | OD409970/2024-2025::Designing, fabricating,testing and installing Curtain Wall with Aluminium Composite
Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights
and all levels etc. including:
Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding INCLUDING
aluminium base frame work in pan shape in metalic colour of approved shades made out of 4mm thick
aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between
two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and
shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,
bolts, washers, cleats, weather silicone sealant, backer rods etc.with aluminium composite panel cladding
till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium
composite panel cladding, having all the performance characteristics all complete, as per the Architectural
drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the
Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face of the
curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm.
up to two decimal places. OD84/21-22 - Modified data 25.7 | 25 | sqm | 3,332 ₹83,300 | 3,302 ₹82,550 Lowest |
| 1.01 | OD407812/2024-2025:Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM
LETTERS 20-25cm for name board with LED light etc complete as per direction of Engineer
incharge at site | 70 | each | 943 ₹66,010 | 934 ₹65,380 Lowest |
| 1.01 | OD408399/2024-2025:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar
locations, of required size, approved shade, colour and texture laid over frame work joints
treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of
slab over 0.50 sqm | 0.54 | sqm | 3,110 ₹1,679.4 | 3,081 ₹1,663.74 Lowest |
Tender Value
₹2.5 L
EMD Value
₹6,400
Closing Date
7 Mar 2025, 3:00 pmClosed
EXECUTIVE ENGINEER
KOCHI MUNICIPAL CORPORATION
S.166/24-25- Completion of Vocational training center in division 10
2025_LSGD_743632_10
Kochi municipal Corporation CCPC4/44073/22(17)
Open Tender
Civil Works - Roads
Item Rate
90 days
ERNAKULAM
Please refer Tender documents.
8 documents required · 8 mandatory
₹650
₹6,400
8 Aug 2025
28 Feb 2025
10 Mar 2025
28 Feb 2025
7 Mar 2025
28 Feb 2025
Amount
vocational training center
OD398595/2024-2025::Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone aggregate, etc. all complete as per the direction of Engineer-in-charge. OD 80/21-22
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
51.2.3:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes
13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
OD409970/2024-2025::Designing, fabricating,testing and installing Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding INCLUDING aluminium base frame work in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.with aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. OD84/21-22 - Modified data 25.7
OD407812/2024-2025:Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM LETTERS 20-25cm for name board with LED light etc complete as per direction of Engineer incharge at site
OD408399/2024-2025:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over frame work joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm
16.21:Engraving letters in hard stone
13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
NIBIN ALEXANDER (BID ID -2142618)
Bidder Name
NIBIN ALEXANDER
Taiju Kuriachan
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .