REPAIR AND POLISHING TO WOODEN FURNITURE AND REPAIR TO CHARPOY GI PIPE WITH PLY TOP AND CERTAIN WOODEN FURNITURES AT AF STN TEZPUR UNDER GE (AF) TEZPUR.

Amount

Taking out unserviceable rail from chair writing and Supply and Fix new rail made of 2nd class hard wood with suitable holes for caning complete all as specified and as shown on drawing(s).

Taking out unserviceable front legs from chair writing and Supply and Fix new front leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable rear legs from chair writing and Supply and Fix new rear legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffeners from chair writing and Supply and Fix new stiffener made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unservicable arm rest from chair writing and Supply and Fix new arm rest made of 2nd class hard wood complete all as specifiedand as shown on drawing(s).

Taking out unservicable back rest from chair writing and Supply and Fix new back rest made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour removal of old existing unserviceable cane from chair writing and recaning in Godrej Pattern with plastic cane Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide,white colour after completion of the repairing and polishing works as per the respective items in this BOQ,complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Taking out unserviceable shoe from chair writing with new PVC/hard rubber shoe ,c.omplete all as specified and directed .

Material and labour for preparation of wooden surfaces of chair writing and polishing of repaired chair writing with two or more coats of French polish upto glossy finish,complete all as specified and directed. [Note:- Applicable for Serial Item No 1.00 to 9.00 : Chair Writing : Refer Drawing No FD-250/FD-280]

Taking out unserviceable rail from chair dining and Supply and Fix new rail made with 2nd class hard wood with suitable holes for caning complete all as specified and as shown on drawing(s).

Taking out unserviceable front legs from chair dining and Supply and Fix new front leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable rear legs from chair dining and Supply and Fix new rear legs made of 2nd class hard wood complete all as specifiedand as shown on drawing(s).

Taking out unserviceable side/centre stiffeners from chair dining and Supply and Fix new stiffener made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable back rest from chair dining and Supply and Fix new back rest made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from chair dining and Supply and Fix new PVC/hard rubber shoe approved quality ,c.omplete all as specified and directed .

Material and labour removal of old existing unserviceable cane from chair dining and recaning in Godrej pattern with plastic cane,Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide,white colour after completion of the repairing and polishing works as per the respective items in this BOQ,complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Material and labour for preparation of wooden surfaces of chair dining and polishing of repaired chair dining with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:- Applicable for Serial Item No 10.00 to 17.00 : Chair Dining: Refer Drawing No FD-279 & 228)

Taking out unserviceable rail/bead from chair easy and Supply and Fix new rail/bead made of 2nd class hard wood with suitable holes for caning ,c.omplete all as specified and directed and as shown on drawing(s).

Taking out unservicable front legs from chair easy and Supply and Fix new legs made of 2nd class hard wood complete all as specified and shown on drawing(s).

Taking out unservicable rear legs from chair easy and Supply and Fix new legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unservicable seat frame from chair easy and supply and fix new seat frame from 2nd class hard wood of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear complete all as specified and as shown on drawing(s).

Taking out unservicable back frame from chair easy and supply and fix new back frame from 2nd class hard wood of section 75 mm x 40 mm of size 510 mm long in front and 480mm long in rear complete all as specified and as shown on drawing(s).

Taking out unservicable arm rest from chair easy and supply and fix new arm rest of size 65 x 25mm x 610mm complete all as specified and as shown on drawing(s).

Material and labour removal of old existing unserviceable cane from chair easy and recaning (seat & back) in Godrej pattern with plastic cane,Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide,white colour after completion of the repairing and polishing works as per the respective items in this BOQ,complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Taking out unserviceable shoe from chair easy and supply and fix new PVC/hard rubber shoe ,c.omplete all as specified and directed .

Material and labour for preparation of wooden surfaces of chair easy and polishing of repaired chair easy with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:- Applicable for Serial Item 18.00 to 26.00 :Chair Easy : Refer Drawing No FD-229)

Taking out of unserviceable side/rear/front rail from chair wooden bottom and Supply and Fix new rail made of 2nd class hard wood for fixing of ply complete all as specified and shown on drawing

Taking out unserviceable front legs from chair wooden bottom and Supply and Fix new front legs made of 2nd class hard wood complete all as specified and shown on drawing(s).

Taking out unserviceable rear legs from chair wooden bottom and Supply and Fix new rear legs made of 2nd class hard wood complete all as specified and shown on drawing(s).

Taking out unserviceable stiffeners from chair wooden bottom and supply and fix new stiffener made of 2nd class hard wood complete all as specified and shown on drawing(s).

Taking out unserviceable back rest from chair wooden bottom and Supply and Fix new back rest made of 2nd class hard wood complete all as specified and shown on drawing(s).

Taking out unserviceable ply from seat of chair wooden bottom and Supply and Fix new 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303) complete all as specified and shown on drawing(s).

Taking out unserviceable shoe from chair wooden bottom and supply and fix new PVC/hard rubber shoe ,c.omplete all as specified and directed .

Material and labour for preparation of wooden surfaces of Chair wooden bottom and polishing of repaired Chair Wooden bottom with two or more coats of French polish upto glossy finish,complete all as specified directed. (Note:- Applicable for Serial Item No. 27.00 to 34.00 : Chair Wooden Bottom : Chair Wooden Bottom :Refer Drawing No FD-285)

Taking out old unservicable long rails from bed plywood top and S& F of new long rails made of 2nd Class hard wood complete all as spefied and shown on drawing(s).

Taking out unserviceable ply wood teak face and Supply and Fix of new 4 mm thick ,3 No of ply,veneered decorative plylywood,grade 1 (with BWR resin) with decorative face veneers on one face,ISI Marked (IS: 1328) of size 780 x 340 mm on both side of head board rest complete all as specified and shown on drawing(s).

All as per item No 36 here-in-before but of size 780 x180 mm on both side foot boards rest complete all as specified and shown on drawing(s).

Taking out unserviceable plywood top from bed ply top and Supply and Fix new 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303) complete all as specified and shown on drawing(s).

Taking out old unserviceable bottom rails of bed ply wood top and Supply and Fix of new bottom rails of 2nd Class hard wood of required shape and size complete all as specified and shown on drawing(s).

Taking out old unserviceable legs from head board of bed ply top and Supply and Fix new legs of head board made of 2nd Class hard wood of required shape and size complete all as specified and shown on drawing(s).

Taking out old unserviceable legs from foot board of bed ply top and Supply and Fix new legs of foot board made of 2nd Class hard wood of required shape and size complete all as specified and shown on drawing(s).

Taking out corner and supply and fix new corner made out of MS flat Iron FI 25 x 5mm,bend to shape required,90 degree angle with suitable holes for fixing from the legs/rails,fixed with screws and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all directed.

Material and labour for preparation of wooden surfaces of bed ply top and polishing of repaired bed ply top with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:- Applicable for Serial Item No. 35.00 to 43.00 :Bed Plywood Top : Refer Drawing No FD-246)

Taking out carefully old existing broken top of table dressing ladies and Supply and Fix the same with new 18/19 mm thick,MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges,finished with two or more coats of French polish for glossy finish, complete all as specified and shown on drawing(s).

Taking out carefully old existing broken bottom of table dressing ladies & Supply and Fix the same with new 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish, complete all as specified and shown on drawing(s).

Taking out old sliding glass shutter with aluminium sliding channel from table dressing ladies and Supply and Fix new glass shutter of size 550mm x 380mm with 5.0 thick,sheet glass,ordinary quality and aluminum anodised sliding channel,complete all as specified and shown on drawing(s).

Taking out old mirror from table dressing ladies and Supply and Fix new mirror of size 366mm x 1220 x 5.0 mm thick,complete all as specified and shown on drawing(s).

Taking out back frame of mirror made out 2nd class hard wood alongwith 6mm thick commercial ply wood from table dressing ladies and Supply and Fix new back frame of size 45mm x 40mm made out of 2nd class hard wood, mirror frame and 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303) complete all as specified and shown on drawing(s).

Taking out old unserviceable drawer of table dressing ladies and Supply and Fix new drawer with brass chromium plated knob complete all as specified and shown on drawing(s).

Taking out unserviceable legs from table dressing ladies and Supply and Fix new legs made with 2nd class hard wood complete all as specified and shown on drawing(s).

Taking out old unserviceable long rail of table dressing ladies and Supply and Fix new long rail made with 2nd class hard wood jointed to leg, complete all as specified and shown on drawing(s).

Taking out old unserviceable side /short rail of table dressing ladies and Supply and Fix new side/short rail made with 2nd class hard wood jointed to leg, complete all as specified and shown on drawing(s).

Taking out old unserviceable back ply wood of box from table dressing ladies and Supply and Fix new 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and shown on drawing(s).

Material and labour for preparation of wooden surfaces of table dressing ladies and polishing of table dressing ladies with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No. 44.00 to 54.00 : TABLE DRESSING LADIES : Refer Drawing No FD-23(M) & FD-251)

Taking out carefully old existing broken top of table dressing gents and Supply and Fix new 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,, complete all as specified and shown on drawing(s).

Taking out carefully old existing broken bottom of box of table dressing gents and Supply and Fix new 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and shown on drawing(s).

Taking out carefully old existing broken sides / partition of box of table dressing gents and Supply and Fix new 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and shown on drawing(s)..

Taking out existing mirror from table dressing gents and Supply and Fix new mirror of size 380mm x 760mm x 5.0mm thick,complete all as specified and shown on drawing(s).

Taking out old unserviceable back frame from table dressing gents and Supply and Fix new back frame of size 45mm x 40mm made of 2nd class hard wood, mirror frame and 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and shown on drawing(s).

Taking out old unserviceable back ply from table dressing gents and Supply and Fix new back ply of size 900mm x 380mm with 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and shown on drawing(s).

Taking out old unserviceable drawer of table dressing gents and Supply and Fix new drawer with brass chromium plated knob complete all as specified and directed.

Taking out sagged and loose dressing table gents from wall and re-fixing/re-securing the same to wall with all accessories such as screw,clips, plugs, clamps, etc complete all specified and directed.

Material and labour for preparation of wooden surfaces of table dressing Gent and polishing of table dressing Gents with two or more coats of French polish upto glossy finished ,complete all as specified and directed (Note:- Applicable for Serial Item No. 55.00 to 63.00 : TABLE DRESSING GENTS :Refer Drawing No FD-230/31)

Taking out existing unserviceable top from table writting and Supply and Fix new top made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and shown on drawing(s).

Taking out old unserviceable ply wood and chromium plated knobs from upper drawer of Table writing and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303), and chromium plated knobs to the upper drwarer, complete all as specified and shown on drawing(s).

Taking out old unsersviceable long stiffner from table writing and Supply and Fix new stiffner made of 2nd class hard wood, complete all as specified and as shown on drawing(s).

Taking out old unsersviceable Side stiffner from table writing and Supply and Fix new stiffner made of 2nd class hard wood, complete all as specified and as shown on drawing(s).

Taking out old unserviceable cabinet of table writing and Supply and Fix new cabinet made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges,finished with two or more coats of French polish for glossy finish, complete all as specified and as shown on drawing(s)..

Taking out old unserviceable shutter from table writing and Supply and Fix new shutter made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,duly fitted with suitable stainless steel hinges including one knob complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table writing and supply and fix new PVC/hard rubber shoe ,c.omplete all as specified and directed .

Material and labour for preparation of wooden surfaces of table writing and polishing of table writing with two or more coats of French Polish upto glossy finished complete all as specified and directed. (Note:- Applicable for Serial Item No. 64.00 to 71.00 : TABLE WRITING : Refer Drawing No FD-33/249/275)

Taking out unserviceable top from side board and Supply and Fix new top made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable sides / vertical partition from side board and Supply and Fix new sides / partition made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable back ply wood 6mm from side board and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and as shown on drawing(s).

Taking out unserviceable drawer ply wood from side board and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and as shown on drawing(s).

Taking out unserviceable knob from drawer of side board and Supply and Fix new brass chromimum plated knob in drawer of side board, complete all as specified and as shown on drawing(s).

Taking out unserviceable shutters (measured as single unit) from side board and Supply and Fix new shutter made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom from side board and Supply and Fix new bottom made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s)..

Taking out unserviceable bottom frame and legs from side board and Supply and Fix new bottom frame and legs made of 2nd Class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of Side board and polishing side board with two or more coats of French polish upto glossy finished all as specified and directed. (Note:- Applicable for Serial Item No. 72.00 to 80.00 :SIDE BOARD : Refer Drawing No FD-241)

Taking out unserviceable top from teapoy wooden and Supply and Fix new top made of 18/19 mm thick MDF Board,prelaminated one side with decorative choice lamination & other side balancing white lamination, exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish, complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from teapoy wooden and supply and fix new legs made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable short rail from teapoy wooden and supply and fix new short rail made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable bottom rail from teapoy wooden and supply and fix new bottom rail made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from teapoy wooden and supply and fix new PVC/hard rubber shoe complete all directed.

Taking out unserviceable long rail from teapoy wooden and supply and fix new long rail made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of teapoy wooden and polishing of teapoy wooden with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:-Applicable for Serial Item No. 81.00 to 87.00 : TEAPOY WOODEN :Refer Drawing No FD-278 & 382)

Supply and Fix new top made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from table centre and Supply and Fix new legs made of 2nd Class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffener from table centre and Supply and Fix new stiffener made of 2nd Class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table centre and supply and fix new PVC/hard rubber shoe ,complete all as specified and directed .

Material and labour for preparation of wooden surfaces of table centre and polishing of repaired table writing with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:-Applicable for Serial Item No. 88.00 to 92.00 : TABLE CENTRE :Refer Drawing No FD-274, 235)

Taking out existing unserviceable top from table dining 8 person and Supply and Fix new top of table dining 8 Persons of size 1800 x 900 x 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable stiffener from table dining 6/8 person and Supply and Fix new stiffener made out of 2nd class hard wood 25 mm thick and 100 mm wide complete all as specified and as shown on drawing(s).

Taking out unserviceable corner from table dining 6/8 person and Supply and Fix new corner made out of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table dining 6/8 person and Supply and Fix new PVC/hard rubber shoe ,complete all as specified and directed .

Taking out existing unserviceable top from table dining 8 person and Supply and Fix new top of table dining 6 Persons of size 1500 x 900 x 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of table dining 6/ 8 Persons and polishing of repaired table dining with two or more coats of French polish upto glossy finished all directed. [Note:- Applicable for Serial Item No 93.00 to 98.00 : Table Dining 6/8 Person: Refer Drawing No FD-273, 30 (M)]

Taking out unserviceable back ply from book case and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),complete all as specified and as shown on drawing(s).

Taking out unserviceable sides / vertical partition from book case and Supply and Fix new sides / vertical partition of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unservicable top / bottom from book case and Supply and Fix new top / bottom made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable long horizontal shelf from book case and Supply and Fix new long horizontal shelf made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish, complete all as specified and as shown on drawing(s).

Taking out unserviceable doors and knob from the book case and Supply and Fix new doors made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,and brass chromium plated knob,complete all as specified and as shown on drawing(s).

Taking out unserviceable legs from book case and Supply and Fix new legs of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of book case and polishing of book case with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:- Applicable for Serial Item No 99.00 to 105.00 : Book Case : Refer Drawing No FD-45 & FD-237)

Taking out unservicable top from table bed side and Supply and Fix new top of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable sides from table bed side and supply and fix new sides made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish, completed all as specified and as shown on drawing(s)..

Taking out unservicable bottom from table bed side and Supply and Fix new bottom made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unservicable shelf from table bed side and Supply and Fix new shelf made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable back ply from table bed side and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303), complete all as specified and as shown on drawing(s).

Taking out unserviceable leg from table bed side and Supply and Fix new leg made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of Table bed side and polishing of table bed side with two or more coats of French polish upto glossy finish,complete all as specified and directed (Note:- Applicable for Serial Item No 106.00 to 112.00 : TABLE BED SIDE :Refer Drawing No FD-248, 276)

Taking out unserviceable shutter from locker (one shutter measured as single unit) and Supply and Fix new shutter made out of 18/19 mm thick ,11 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303),hung with 2 Nos of MS butt hinges, medium 75mm size,1 No of 100mm aluminium anodised handle including 4mm thick teak wood beading all round the shutter,complete all as specified and as shown on drawing(s).

Taking out unserviceable back ply wood from locker and Supply and Fix new back made of 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303), fixed with screwes complete all as specified and as shown on drawing(s)..

Taking out unserviceable Hapes and staple from locker and S& F new Hapes and staple fixed with suitable size of screw, complete all as specified and as shown on drawing(s).

Taking out unserviceable legs with bottom frame from locker bed side and Supply and Fix new legs and bottom frame made with 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of locker bed side and polishing of locker bed side with two or more coats of French polish upto glossy finish,complete all as specified and directed. (Note:- Applicable for Serial Item No 113.00 to 117.00 : LOCKER BED SIDE WOODEN : Refer Drawing No FD-54/222)

Taking out existing unserviceable top from table 3'x2' with/without drawer and Supply and Fix new top of size 900 x 600 x 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable drawer from table 3' x 2' with drawer and Supply and Fix of new drawer made of 2nd class hard wood and 6 mm thick ,5 No of ply, plylywood,grade BWR,Type BB, ISI Marked (IS: 303), including chromium plated knob complete all as specified and shown on drawing(s).

Taking out unservicable stiffener from table 3'x2' with/without drawer and Supply and Fix new stiffener made of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table 3'x2' with/without drawer with new PVC/hard rubber shoe complete all as specified and directed.

Supply and Fix of new MS flat in L shape 150 mm long made of FI 30 x 5 mm thick with suitable holes to fix with legs and rails, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer,complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table 3'x2' with/without drawer and polishing of 3'x2' with/without drawer with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 118.00 to 123.00 :Table 3' x 2' with/ Without Drawer : Refer Drawing No FD-283,284,55)

Taking out unserviceable top from table 3'x3' and Supply and Fix new top of size 900 x 900 x 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from table 3'x3' and Supply and Fix new PVC/hard rubber shoe complete all as specified and directed.

Taking out unserviceable corner from table 3'x3' and Supply and Fix new corner 150 mm (L) made out of FI 30 x 5mm MS flat in L shape with suitable holes to fixing with legs/rails and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of wooden surfaces of table 3' x3 and polishing of table 3'x3' with/without drawer with two or more coats of French polish upto glossy finish,complete all as specified and directed. directed. (Note:- Applicable for Serial Item No 124.00 to 127.00 : Table 3' x 3'(Wooden) : Refer Drawing No FD-291, 88)

Taking out unservicable legs from sofa set 5/4 seater front or rear legs and Supply and Fix new legs made out of 2nd class hard wood complete all as specified and as shown on drawing(s).

Taking out unservicable battens of seat and back from sofa set 4/5 seater and Supply and Fix new battens made out of 2nd class hard wood all as shown in drg.

Taking out unservicable side rails from sofa set 4/5 seater and Supply and Fix new rails made out of 2nd class hard wood complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of sofa 3 seaters and polishing of sofa 3 seaters with two or more coats of French polish upto glossy finish complete all as specified and directed.

Material and labour for preparation of wooden surfaces of sofa single seaters and polishing of sofa single seaters with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 128.00 to 132.00 : Sofa Set 5 Seater/4 Seater : Refer Drawing No FD-281)

Taking out old unserviceable looking mirror from hat stand with mirror and Supply and Fix new mirror 5mm thick of approved quality duly fixed with well seasonedfirst class hard wood(Teak) beading all around, complete all as specified and as shown on drawing(s).

Taking out old unserviceable brass peg from hat stand with mirror and Supply and Fix new brass peg approved quality duly fixed with Screw, complete all as specified and as shown on drawing(s).

Taking out old unserviceable back side ply from hat stand with mirror and Supply and Fix new 4 mm thick ,3 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303), fixed with head less nail, complete all as specified and as shown on drawing(s).

Taking out old unserviceable front side Teak Face ply from hat stand with mirror and Supply and Fix new 4 mm thick ,3 No of ply,veneered decorative plylywood,grade 1 (with BWR resin) with decorative face veneers on one face,ISI Marked (IS: 1328)4 mm thick ,3 No of ply,veneered decorative plylywood,grade 1 (with BWR resin) with decorative face veneers on one face,ISI Marked (IS: 1328) fixed with head less nail, complete all as specified and as shown on drawing(s).

Taking out old unserviceable beading from hat stand with mirror and Supply and Fix new beading made of first class hard wood (Teak) of size 35 mm x 6mm all round, complete all as specified and as shown on drawing(s).

Material and labour for preparation of wooden surfaces of hat stand with mirror and polishing of hat stand with mirror with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 133.00 to 138.00 : Hat Stand with Mirror : Refer Drawing No FD-233)

Taking out unserviceable top from peg table and Supply and Fix new top made of 18/19 mm thick MDF Board, prelaminated one side with decorative choice lamination & other side balancing white lamination,exterior grade,ISI Marked (IS:12406) with 4 mm thick edging (with width equal to width of particleboard) of 2nd class hard wood on exposed edges, finished with two or more coats of French polish for glossy finish,complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from Peg table and supply and fix new PVC/hard rubber shoe ,complete all as specified and directed .

Material and labour for preparation of wooden surfaces of Peg table and polishing of peg table with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 139.00 to 141.00 : Peg Table : Refer Drawing No FD-236 & 277)

Taking out unserviceable shoe from Chair dining officers and Supply and Fix new PVC/hard rubber shoe approved quality ,complete all as specified and directed.

Taking out unserviceable ply from seat of chair dining officers and Supply and Fix new 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB, ISI Marked (IS: 303),complete all as specified and shown on drawing(s).

Taking out unserviceable foam from chair dining officers and supply and fix new foam with fabric on seat of 75 mm thick, 40 density,complete all as specified and directed. [Make Kurlon/Sleepwell/Dunlop]

Covers for foam as in item 144 above made out of tapestry cloth not less than Rs 240/- per meter as approved by GE perfectly fitting the foams and covering/uncovering the cushion and complete all as specified and directed.

Material and labour for preparation of wooden surfaces of chair dining/Chair dining officers and polishing of repaired chair dining with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 142.00 to 146.00 : Chair Dining Officers: Refer Drawing No FD/MAP-II/04)

Taking out unserviceable cushion foam from sofa set and supply and fix new cushion foam of 100mm thick, 40 density and complete all as specified and directed. [Make Kurlon/Sleepwell/Dunlop]

Covers for cushions as in item 147 above made out of tapestry cloth not less than Rs 240/- per meter as approved by GE perfectly fitting the cushions and duly fitted with zipper to secure the covering/uncovering the cushion and complete all as specified and directed. (Note:- Applicable for Serial Item No 147.00 to 148.00 : Cushion for Sofa Set: Refer Drawing No FD-229)

Taking out unserviceable legs from stool dressing and Supply and Fix new legs made with 2nd Class hard wood legs complete all as specified and as shown on drawing(s).

Taking out unserviceable short rails from stool dressing and Supply and Fix new short rails made with 2nd Class hard wood complete all as specified and as shown on drawing(s).

Taking out unserviceable long rails from stool dressing and Supply and Fix new long rails made with 2nd Class hard wood,complete all as specified and as shown on drawing(s).

Taking out unserviceable shoe from stool dressing and supply and fix new PVC/hard rubber shoe complete all as specified directed.

Material and labour removal of old existing unserviceable cane from stool dressing and recaning in Godrej pattern with plastic cane,Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide,white colour after completion of the repairing and polishing works as per the respective items in this BOQ,complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Material and labour for preparation of wooden surfaces of Stool Dressing and polishing of Stool Dressing with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 149.00 to 154.00 : Stool Dressing : Refer Drawing No FD-252 & 282)

Taking out unserviceable ply wood of door side from Bin Soiled linen large and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR, Type BB,ISI Marked (IS: 303) complete all as specified and shown on drawing(s).

Taking out unserviceable ply wood of Front / Back side from Soiled linen Large and Supply and Fix new 6 mm thick ,5 No of ply, plylywood,grade BWR, Type BB,ISI Marked (IS: 303) complete all as specified and shown on drawing(s).

Taking out unserviceable door frame from Bin Solid Linen large and Supply and Fix new door frame made of 2nd class hard wood,complete all as specified and as shown on drawing(s).

Taking out unserviceable leg from Bin Solid Linen large/small and Supply and Fix new leg made of 2nd class hard wood,complete all as specified and as shown on drawing(s).

Material and labour removal of old existing unserviceable cane from Bin Soiled Linen Large and recaning in Godrej pattern with plastic cane,Type-I (HDPE) conforming to IS: 5378-1994, 2mm to 2.5mm wide,white colour after completion of the repairing and polishing works as per the respective items in this BOQ,complete all as specified and directed. [Make: Arya/Ajay/Supreme]

Material and labour for preparation of wooden surfaces of Bin Soiled Linen Large/Small and polishing of Bin Soiled Linen Large/Small with two or more coats of French polish upto glossy finish complete all as specified and directed. (Note:- Applicable for Serial Item No 155.00 to 160.00 : Bin Soiled Linen Large/Small : Refer Drawing No FD-244)

Taking out existing unserviceable 3 way elbow from Charpoy GI ply top and supply and fix new 32mm bore galvanized mild steel tubular and other wrought steel elbow side outlet equal (3 way elbow),ISI Marked (IS 1239 Part 2) suitable for fixing to GI short rail,long rail and legs of GI charpoy, complete all as specified and directed.

Taking out unserviceable FI stiffner from Charpoy GI ply top and supply and fix new stiffener made out of flat iron 25 x 5 mm thick (approx 1 metre long) and fixed to long rail with mild steel chromium plated nut & bolt not less than 8mm dia. including drilling holes in stiffener and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer after preparation of surface,complete all as specified and as directed.

Taking out existing unserviceable check nut and supply and fixing new 6mm thick GI check nut,32mm size and fixing the same in position, complete all as specified and directed

Taking out existing unserviceable long rail from Charpoy GI and Supply and Fix new long rail made out of 32 mm bore galvanised steel tubing, medium grade,complete all as specified and directed. [Make: Tata/Jindal/Praksh/Surya]

Taking out existing unserviceable short rail from the charpoy and converting of the long rail into short rail by cutting/finishing to size required including threading and replacing the same against unserviceable short rail,complete all as specified and directed. Note :- Old long rail retrieved from Serial Item No.164 Here in Before shall be used for converting into short rail.

Taking out existing unserviceable legs from the charpoy and converting of the short rail into legs by cutting/finishing to size required including threading and replacing the same against unserviceable legs,complete all as specified and directed. Note :- Old short rail retrieved from Serial Item No.165 Here in Before shall be used for converting into legs.

Taking out existing unserviceable plywood top from Charpoy GI ply top and supply and fix new 12 mm thick ,7 No of ply, plylywood,grade BWR,Type BB,ISI Marked (IS: 303) complete all as specified and shown on drawing(s). (Note:- Applicable for Serial Item No 161.00 to 167.00 : Charpoy GI with Ply Top : Refer Drawing No FD-220)

KIRAN REED INDUSTRIES

Evergreen Firm