PROVN OF WATER PIPE LINE FROM MAIN WATER TANK TO TOILETS ,BATH ROOMS AND COOK HOUSE AT BONIYAR,PROVN OF TOILET NEAR BLDG NO T-64 OF INF BN AT URI,COVERED PASSAGE IN INF BDE CAMP AT RAMPUR ,PROVN OF TOILET FOR OR CVY LINE,FD REGT AT URI,PROVN OF STORE

Amount

Surface dressing n. exc 15 cm deep Complete all as specified and directed by Engineer-In-Charge.

Surface Excavation not exc 30 cm and averaging 15 cm getting out Hard/ Dense Soil Complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches in any type of soil, n.exc 1.50 M wide and n.exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil Complete all as specified and directed by Engineer-In-Charge.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm. Complete all as specified and directed by Engineer-In-Charge.

Removing excavated material ( soil) exc 250 m but not exc 500 m deposited where as directed complete all as specified and directed by Engineer-In-Charge.

Removing Excavated soils exceeding 500 M but not exceeding 1.5 KM and depositing where directed omplete all as specified and directed by Engineer-In-Charge.

M&L for Hard core of guage n.exc 63mm ,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed complete all as specified and directed by Engineer-In-Charge.

M&L for PCC Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engineer-In-Charge.

M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, coping & haunching etc complete all as spd and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by Engineer-In-Charge.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed by Engineer-In-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engineer-In-Charge.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-In-Charge.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius for anhole/septic tank etc built in CM 1:4 complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and finished even and fair without using extra cement.

M&L for rendering 15 mm thick on stone masonary surface other than fair faces of brick work in cement mortar 1:6 complete all as specified and directed by Engineer-In-Charge.

M&L plastering 15mm thick on bricks work in CM 1:4 cement mortar finished even and smooth without using extra cement complete all as specified and directed by Engineer-In-Charge.

M&L 15mm thick rendering on fair faces of brick work or conceret surface in CM 1 :6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-In-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coat distemper Oil emulsion complete all as specified and directed by Engineer-In-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed by Engineer-In-Charge.

M&L for preparing newly plastered surfaces of walls and applying two coats white wash complete all as specified and directed by Engineer-In-Charge.

M&L for form work to sides of concrete foundations/ Plinth beam of rough finished flat surfaces of concrete complete all as specified and directed by Engineer-In-Charge.

M&L for form work to sides of columns of rough finished square or rectagular surfaces of concrete complete all as specified and directed by Engineer-In-Charge.

M&L for form work to sides of Roofs beams of rough finished flate surfaces of concrete complete all as specified and directed by Engineer-In-Charge.

S&F 20mm thick facia boarding of 2nd class soft wood planed one side with but joints complete all as specified and directed by Engineer-In-Charge.

M & L for mild steel TMT bars 10 mm dia and over , quality,cut to length, bent to shape required including cranking, bending and binding with mild steel wire( annealed ) not less than 0.9mm dia complete all as specified and directed by Engineer-In-Charge.

All as per item No 27 before in here but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-In-Charge.

M&L for RCC M-25(Design Mix), using 20 mm graded aggregate as in Coloumn, pillars, piers, postes and struts complete all as specified and directed by Engineer-In-Charge.

M&L for RCC M-25(Design Mix), using 20 mm graded aggregate as in Raft , Foundation, Plinth, floor Beames complete all as specified and directed by Engineer-In-Charge.

M&L for RCC M-25(Design Mix), using 20 mm graded aggregate as in Roof beams, Cantilevers, Bressumers complete all as specified and directed by Engineer-In-Charge.

M&L Reinforced cement concrete (Nominal Mix) type B-0 1:2:4 (12.5mm Crushed stone aggregate) in beams, cantilevers,bressummers, lintels etc.

S&F 2nd class soft wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class softwoo d 35 mm thick plain ,framed,pannelled shutters (any number of pannel), with panels of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and directed.

S&F 35 mm thick second class HW plain framed panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle boards with commercial veneering on both faces. The spanels of veneered particle board or plywood chemically pressured treated complete all as specified and directed by Engineer-In-Charge.

S & F aluminium sheeting 0.56 mm thick in hips ,valley ,drip and straight flashing (Length and girth as fixed).

S/F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gauge etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as spd in SSR Part-I section 8 clause 8.23(b) complete all as specified and directed by Engineer-In-Charge.

S/F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-I section 8 clause 8.24(b) complete all as spd.

S&F 150mm long MS barrel tower bolts stove enamelled black with bright bolt complete all as specified and directed by Engineer-In-Charge.

S&F 100 mm long MS barrel tower bolts stove enamelled black with bright bolt complete all as specified and directed by Engineer-In-Charge.

S&F 300mm long MS sliding door bolt with haps, staple (bolt type)and fixing clips of sheet,and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts complete all as specified and directed by Engineer-In-Charge.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed by Engineer-In-Charge.

S&F 75mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed by Engineer-In-Charge.

S&F 150mm long MS pressed handle ovel type, stove enamelled complete all as specified and directed by Engineer-In-Charge.

S&F 100mm long MS pressed handle ovel type, stove enamelled complete all as specified and directed by Engineer-In-Charge.

S & F 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed by Engineer-In-Charge.

M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-In-Charge.

S&F 0.50mm Pre- Painted galvalume aluminum zinc coated GI based plain steel sheet any colour having tensile stregth of 50 Mpa as in roof covering/ Cladding to wall , fixed with self tapping screws complete all as specified and directed by Engineer-In-Charge.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E- 250) quality- A complete all as specified and directed by Engineer-In-Charge..

S&F mild steel plates wind ties for roof incl securing bolts and work confiring to Fe-290 Gde E-165 complete all as specified and directed by Engineer-In-Charge.

M&L for 12 mm thick perforated particle board/ tiies for isulation and accousitc purpose, 60x60 cm in size , Fixed with nails to timber frame work or with staple on snap gird decorate the surface with white paint or complete all as specified and directed by Engineer-In-Charge.

S&F for anodised aluminium snap grid (size of grid 605mm X 605mm) frame work for flash ceiling complete all as specified and directed by Engineer-In-Charge.

S & F Rolled Mild steel Channels,angles,or tee sections fixed indipendently,with out connecting plates of Fe 410-W(Gde-E-250) quality -A complete all as specified and directed by Engineer-In-Charge.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring complete all as specified and directed by Engineer-In-Charge.

M&L 75 mm thick Cement concrete type C2 1:3:6 (using 40 mm graded granite stone aggregate) in plinth protection complete all as specified and directed by Engineer-In-Charge.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base complete all as specified and directed by Engineer-In-Charge.

M&L for 150 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in floors in alternate bays, finishing concrete surface even and smooth without using extra cement and making impressions of expanded metal, whilist the concrete is green complete all as specified and directed by Engineer-In-Charge.

M&L Hard core of broken stone or boulder of gauge exceeding 63mm but not exc 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-In-Charge.

M&L for screed bed or bedding layer of cement mortar 1:4 , 20 mm thick for laying floor finishes complete all as specified and directed by Engineer-In-Charge.

S&F coloured non skid ceremic tiles 300x300x7 thick , in flors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 for backing of Dado/ Skerting complete all as specified and directed by Engineer-In-Charge.

S&F Glazed coloured ceremic tiles 450x350x7mm/450x350x7mm thick , in dado / skerting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match pigment complete all as specified and directed by Engineer-In-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete to achive mirror polish complete all as specified and directed by Engineer-In-Charge.

M&L for screed bed or bedding layer of cement mortar 1:4 , 15 mm thick for laying floor finishes complete all as specified and directed by Engineer-In-Charge.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and directed by Engineer-In-Charge.

S & F PVC Floor trap of 75 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement,cement concrete ( 1:2:4) Type B-1 complete all as specified and directed by Engineer-In-Charge.

S&F 15mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type complete all as specified and directed by Engineer-In-Charge.

S & F 75 mm bore PVC (SWR) pipes single socked, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) bends of bore 75mm complete all as specified and directed by Engineer-In-Charge.

S&F Aluminum, anodized, barrel tower bolts of extruded section and fixed of length 150mm complete all as specified and directed by Engineer-In-Charge.

S&F Aluminum, anodized, barrel tower bolts of extruded section and fixed of length 100mm complete all as specified and directed by Engineer-In-Charge.

S&F Aluminum anodized sliding door bolt with hasp and staples (bolt type)and fixing clips alloy and fixed of length 200 mm complete all as specified and directed by Engineer-In-Charge.

S&F Aluminum anodized handles cast type of 150 mm complete all as specified and directed by Engineer-In-Charge.

S&F Aluminum anodized handles cast type of 100 mm complete all as specified and directed by Engineer-In-Charge.

S&F Butt hinges, medium weight cold rolled mild steel and fixed of size 100mm complete all as specified and directed by Engineer-In-Charge.

S&F Butt hinges, medium weight cold rolled mild steel and fixed of size 75mm complete all as specified and directed by Engineer-In-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-In-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/Dence soil complete all as specified and directed by Engineer-In-Charge.

M&L for Cement concrete type C-2 (1:3:6), 40mm graded aggregate in foundation filling and mass concrete complete all as specified and directed by Engineer-In-Charge.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-In-Charge.

S&F 1.00mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holespunched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc as required.

S&F 15mm stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes but fancy type C.P. with long shank (Concealed type) complete all as specified and directed by Engineer-In-Charge.

M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity all as specified in SSR Part I complete all as specified and directed by Engineer-In-Charge.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe complete all as specified and directed by Engineer-In-Charge.

S&F tube medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following sizes 15mm bore of pipe complete all as specified and directed by Engineer-In-Charge.

S&F tube medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following sizes 20mm bore of pipe complete all as specified and directed by Engineer-In-Charge.

M&L for 150mm bore plain cement Concrete (1:4;8 ) type D2 using 40 mm graded stone aggregate bed to drain pipes including packing under, and haunching including against the side of pipes after they are laid and tested complete all as specified and directed by Engineer-In-Charge.

S&F Reinforced concrete pipes 150 mm bore class NP-3 laid and jointed complete with collars all as specified complete all as specified and directed by Engineer-In-Charge.

S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes 20mm bore complete all as specified and directed by Engineer-In-Charge.

S&F 75mm bore PVC (SWR) bends any radius with providing acceess door complete all as specified and directed by Engineer-In-Charge.

S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes but fancy type C.P. with long shank (Concealed type) complete all as specified and directed by Engineer-In-Charge.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe.(min wt 40gms) complete all as specified and directed by Engineer-In-Charge.

S&F,Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and directed by Engineer-In-Charge.

S&F, vitreous China ware wash hand basin white of size 550 x 400mm incl CP waste coupling and PVC waste pipe and MS steel brackets all as as in repairs complete all as specified and directed by Engineer-In-Charge.

Supply & Fixed flushing cistern PVC, low level of capacity of 10 ltr, white, valveless syphonic action type complete with inlet ball valve float and handle or Push button type including brackets, and PVC connection( 15mm size with PTMT nuts of length 450mm complete) complete all as specified and directed by Engineer-In-Charge.

Vitreous China urinals, half stall type ,fixed in repair incl CP coupling ,vest pipe and all necessary fitting ,complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed by Engineer-In-Charge.

S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 170 gms) complete all as specified and directed by Engineer-In-Charge.

S&F factory made RCC manhole cover with frame (dia of manhole cover 60cm) complete all as spd and directed. complete all as specified and directed by Engineer-In-Charge.Make: Mahindra ,Kawach

S&F Rolled mild steel sections in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, ceats etc of GE 410 (Gde-E-250 quality-A) complete all as specified and directed by Engineer-In-Charge.

S&F 0.63 mm thick galvanized, corrugated mild eel sheeting with grade of zinc coating 275, with two corrugation side lap, fixed with L- or J - type or cranked hook bolts and washers in roofs all as specified complete all as specified and directed by Engineer-In-Charge.

Preparation of new or previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxied zinc chrome primer complete all as specified and directed by Engineer-In-Charge.

Preparation of new wooden surfaces , not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat pink primer complete all as specified and directed by Engineer-In-Charge.

Point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC concealed conduit 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified and directed by Engineer-In-Charge.

All as per sel item No. 105 above but 3 pin 5 Amp switch socket outlet on same board complete all as specified and directed by Engineer-In-Charge.

S & F fixed Switch piano, flush type single pole, one way 5/6 Amp complete all as specified and directed by Engineer-In-Charge.

S&f Lamp holder, PVC/ polycarbonate type with black plate suitable for batten fittingscomplete all as specified and directed by Engineer-In-Charge.

S7F Celing rose surface bakelite 65 X 50 mm Three terminal complete all as specified and directed by Engineer-In-Charge.

S&F LED Lamp 7 Watts 230 Volts 50 Hz complete all as specified and directed by Engineer-In-Charge.

S & F 1 X 20 Watt surface and wall mounted LED batten, with polycarbonate housing & integrated electronic dirver complete. Make:- Havells cat part no. LHEXBLP7PN1W020 or other equivalent in CG/Philips/Bajaj

S&f Sheet metal enclosure for 4 way DBs when MCB to be used single phase 240 volts, single doorcomplete all as specified and directed by Engineer-In-Charge.

S&F MCB single pole of capacities 6 to 32 amp, 240 volts complete complete all as specified and directed by Engineer-In-Charge.

S&F MCB single pole & neutral of capacities 32 amp, 240 volts completecomplete all as specified and directed by Engineer-In-Charge.

Supply and fixing metalic Exhaust fan 230mm sweep, 230 volts, connecting up including provision of cable from ceiling rose/ connector to fan complete all as specified and as directed complete all as specified and directed by Engineer-In-Charge.

Supplying and fixing service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers notmore than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 4 sqmm complete all as specified and directed by Engineer-In-Charge.

Point wiring with 2.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC concealed conduit 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) surface type, for 3 pin socket outlet, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 2.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified complete all as specified and directed by Engineer-In-Charge.

S & F fixed socket flush type multipurpose 3/5 pin suitable for 5 amps plug top controlled by onew switch complete all as specified and as directed complete all as specified and directed by Engineer-In-Charge.

S & F fixed socket multipurpose 3/5 pin 15 amps flush type complete complete all as specified and directed by Engineer-In-Charge.

S & F fixed switch piano flush type 15 amps single pole one way complete all as specified and directed by Engineer-In-Charge.

Supply and fixing Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs of capacity 10W 6000K of Havells model no.LHEOAOP7UZ6W010 or other equivalent approved in CG/Philips

S & F MCB, DP 40 Amps 415 Volts Gold plus MCB C Curve Complete all as specified and directed by Engineer-In-Charge

Taking down old unserviceable tube light fitting and Supply & Fixing 1 X 18 Watt surface and wall mounted LED batten, with polycarbonate housing & integrated electronic dirver complete all as specified and directed by Engineer-In-Charge.. Make:- Havells cat part no. LHEXBQP71N1W018 or other equivalent in CG/Philips

Supply and fixing 1200 mm sweep electric ceiling fans shall be capacitor type, with double ball bearing complete with capacitor, 300 mm down rods, canopies, three number blades made of aluminium alloy, with suitable electronic type regulator, suitable for operation of single phase, AC 230 volts, 50 HZ , BEE 5 star rated complete all as specified and directed by Engineer-In-Charge.. Make:- Havells or any equivalent approved by GE.

Sheet metal enclosure for 8 way DBs when MCB to be used single phase 240 volts, single door complete all as specified and as directed. complete all as specified and directed by Engineer-In-Charge.

Supply and fixing in Turbo force metal Exhaust fan 300 mm sweep 230 volts, 900 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan complete all as specified and directed by Engineer-In-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connecting with galvanizing iron & steel GI earth wire 4 mm dia by means of bolt nut check nuts and washers of galvanised iron, 15 mm dia GI Pipe for protection to earth lead including PCC with 1:2:4 type B1 using 20mm graded stone aggregate CI frame and cover of angle iron 25 X 25 X 3 mm with 6 mm dia MS bar made to shape GI medium 20 mm bore pipe for watering in any type of soil returning filling in and removal of surplus soil to a distance n.exc 5.0 mm all as per electric plate no.3OF ssr 2009 Part I connected to earth test point all as specified and indicated including testing on completion complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, laying of cables, etc. and getting out in Hard/dense soil complete all as specified complete all as specified and directed by Engineer-In-Charge.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all ascomplete all as specified and directed by Engineer-In-Charge.. (Note: The punned down thickness shall only be measured)

Supply and laying sub class 'B' bricks laid across the cable for cable protection complete all as specified and directed by Engineer-In-Charge.

Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 2 core 6 Sq mm complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing 50 mm dia GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc. Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing 25 mm dia GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc. Complete all as specified and directed by Engineer-In-Charge.

Cutting of existing GI pipe line of any size 25 mm dia and inseting new pipe of dia line including all fittings. Complete all as specified and directed by Engineer-In-Charge.

S & F of stop valve/gate valves of size 50mm ,cast copper alloy ,screwed down,crunch or butterfly handle with high pressure,screwed both end for iron pipes or unions and fixed Complete all as specified and directed by Engineer-In-Charge.

S & F of stop valve/gate valves of size 25mm ,cast copper alloy ,screwed down,crunch or butterfly handle with high pressure,screwed both end for iron pipes or unions and fixed Complete all as specified and directed by Engineer-In-Charge.

m/s mohd rafiq lone