Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
16 Jun 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WEST
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- C-5:Any Civil Engineering Work / Zonal maintenance works.
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division) before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Zone GUNTUR - Guntur station building and its premises for the period from 01-07- 2026 to 30-06-2027
494-DRM-W-GNT-Tid-2853
494-DRM-W-GNT-Tid-2853
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹2.7 L
16 Jun 2026
22 May 2026
2 Jun 2026
70 items across 1 schedule · ₹11,18,909.81 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | NS-GNT-DSR-21-Supply of G.I. pipes 50 mm dia medium class | Metre | 60.00 | 695.73 | 41,743.8 |
| 2 | NS-GNT-DSR-22-Supply of GI coupling- 50 mm | Each | 20.00 | 160.55 | 3,211 |
| 3 | NS-GNT-DSR-23-Supply of GI T bend-50 mm | Each | 10.00 | 334.48 | 3,344.8 |
| 4 | NS-GNT-DSR-24-Supply of GI 'L' bend-50 mm | Each | 10.00 | 267.59 | 2,675.9 |
| 5 | NS-GNT-DSR-25-Supply of GI Union-50 mm | Each | 10.00 | 401.38 | 4,013.8 |
| 6 | NS-GNT-DSR-26-Supply of GI flanges -50 mm | Set | 10.00 | 535.18 | 5,351.8 |
| 7 | NS-GNT-DSR-27-Supply GI Gate valve Zoloto-50 mm | Each | 15.00 | 4,682.78 | 70,241.7 |
| 8 | NS-GNT-DSR-'38-Supply GI Gate valve Zoloto-25 mm | Each | 30.00 | 1,471.73 | 44,151.9 |
| 9 | NS-GNT-DSR-'39-Supply GI Ball valve Zoloto-25 mm | Each | 10.00 | 869.66 | 8,696.6 |
| 10 | NS-GNT-DSR-48-Supply GI Gate valve Zoloto-20 mm | Each | 10.00 | 1,043.59 | 10,435.9 |
| 11 | NS-GNT-DSR-49-Supply GI Ball valve Zoloto-20 mm | Each | 10.00 | 535.18 | 5,351.8 |
| 12 | NS-GNT-DSR-54-Supply of GI coupling- 15 mm | Each | 10.00 | 26.76 | 267.6 |
| 13 | NS-GNT-DSR-58-Supply GI Ball valve Zoloto-15 mm | Each | 20.00 | 401.38 | 8,027.6 |
| 14 | NS-GNT-DSR-59-Supply of GI Nipple 15 mm - 3 inch | Each | 20.00 | 20.07 | 401.4 |
| 15 | NS-GNT-DSR-'60 Supply of GI Nipple 15 mm - 4 inch | Each | 10.00 | 26.76 | 267.6 |
| 16 | NS-GNT-DSR-61-Supply of GI Nipple 15 mm - 6 inch | Each | 10.00 | 33.45 | 334.5 |
| 17 | NS-GNT-DSR-62 Supply of GI Nipple 15 mm - 12 inch | Each | 10.00 | 66.9 | 669 |
| 18 | NS-GNT-DSR-64-Supply of GI double acting Air valve -50 mm | Each | 5.00 | 6,555.89 | 32,779.45 |
| 19 | NS-GNT-DSR-65-Supply of GI double acting Air valve -100 mm | Each | 2.00 | 12,710.41 | 25,420.82 |
| 20 | NS-GNT-DSR-66-Supply Water metre damesh-50 mm | Each | 10.00 | 9,097.98 | 90,979.8 |
| 21 | NS-GNT-DSR-68-Supply Water metre damesh-100 mm | Each | 5.00 | 19,400.1 | 97,000.5 |
| 22 | NS-GNT-DSR-69-Supply Full Gate Valve Brass rod- 80 mm | Each | 5.00 | 10,034.53 | 50,172.65 |
| 23 | NS-GNT-DSR-199-supply of precast RCC Manhole cover 600 x600 mm (24''x24") | Each | 10.00 | 628.83 | 6,288.3 |
| 24 | NS-GNT-DSR-200-supply of precast RCC Manhole cover 530x530 mm (21"x21") | Each | 10.00 | 561.93 | 5,619.3 |
| 25 | NS-GNT-DSR-201-supply of precast RCC Manhole cover 450x450 mm (18"x18") | Each | 10.00 | 428.14 | 4,281.4 |
| 26 | NS-GNT-DSR-202-supply of precast RCC Manhole cover 380x380 mm (15"x15") | Each | 5.00 | 361.24 | 1,806.2 |
| 27 | NS-GNT-DSR-203-supply of precast RCC Manhole cover 300x300 mm (12"x12") | Each | 5.00 | 227.45 | 1,137.25 |
| 28 | NS-GNT-DSR-204-Supply of C.P. Brass bib- cock 15 mm dia (Jaquar) | Each | 15.00 | 1,605.52 | 24,082.8 |
| 29 | NS-GNT-DSR-205-Supply of C.P.Brass Push cock 15 mm dia | Each | 10.00 | 1,271.04 | 12,710.4 |
| 30 | NS-GNT-DSR-206-Supply of C.P.Brass Angle valve 15 mm dia | Each | 20.00 | 735.87 | 14,717.4 |
| 31 | NS-GNT-DSR-207-Supply of C.P. Brass Long body bib-cock 15 mm dia | Each | 20.00 | 1,806.21 | 36,124.2 |
| 32 | NS-GNT-DSR-208-Supply of CP brass pillar cock | Each | 20.00 | 1,806.21 | 36,124.2 |
| 33 | NS-GNT-DSR-209-Supply of C.P. Brass Two- way bib-cock 15 mm dia | Each | 20.00 | 2,408.29 | 48,165.8 |
| 34 | NS-GNT-DSR-210-Supply of C.P. Brass Two- way Angle valve 15 mm dia | Each | 10.00 | 2,140.7 | 21,407 |
| 35 | NS-GNT-DSR-211-Supply of C.P. brass wallmixer Three-in-one 15 mm dia including hand and Head shower | Each | 5.00 | 9,766.94 | 48,834.7 |
| 36 | NS-GNT-DSR-213-Supply of Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia | Each | 10.00 | 936.56 | 9,365.6 |
| 37 | NS-GNT-DSR-216-Supply of C P brass Towel Ring 215x200x ( 3 7 m m fro m wall)complete with fixing arrangements | Each | 5.00 | 1,204.14 | 6,020.7 |
| 38 | NS-GNT-DSR-255-Supply of Ordinary Portland Cement-53 grade | per 50 kg of cement | 25.00 | 481.66 | 12,041.5 |
| 39 | NS-GNT-DSR-262-Hiring of JCB with all contractors men, consumables and machinery | Hour | 10.00 | 1,337.94 | 13,379.4 |
| 40 | NS-GNT-DSR-72-Supply of Polyethylene Vinyl Chloride water storage tank with cover and suitable locking arrangement | Litre | 10000.00 | 16.06 | 1,60,600 |
| 41 | NS-GNT-DSR-73-Supply of M-seal packet 80 grams | Each | 20.00 | 46.83 | 936.6 |
| 42 | NS-GNT-DSR-74-Supply of pig lead | Kg | 10.00 | 535.18 | 5,351.8 |
| 43 | NS-GNT-DSR-16-Supply of Coarse Sand at specified locations | cum | 10.00 | 1,662.62 | 16,626.2 |
| 44 | NS- GNT-DSR-75-Supply of Hydraulic door closer ISI marked (IS:3564-1996) | Each | 15.00 | 2,241.05 | 33,615.75 |
| 45 | NS-GNT-DSR-76-Supply of SS Fly proof wire mesh (4 feet height) | Square Foot | 1000.00 | 36.12 | 36,120 |
| 46 | NS-GNT-DSR-77-Supply of Brass butt hinges (light/ordinary type) : 100x70x4 mm | Each | 10.00 | 294.35 | 2,943.5 |
| 47 | NS-GNT-DSR-78-Supply of Brass butt hinges (light/ordinary type):75x40x2.5 mm | Each | 10.00 | 90.31 | 903.1 |
| 48 | NS-GNT-DSR-79-Supply of Brass tower bolt (barrel type) 200x10 mm | Each | 20.00 | 668.97 | 13,379.4 |
| 49 | NS-GNT-DSR-80-Supply of Brass handles75 mm with plate 125x32 mm | Each | 20.00 | 180.62 | 3,612.4 |
| 50 | NS-GNT-DSR-83-Supply of Oxidised mild steel tower bolt (barrel type) 200x10 mm | Each | 10.00 | 66.9 | 669 |
| 51 | NS-GNT-DSR-84-Supply of Oxidised mild steel tower bolt (barrel type) 150x10 mm | Each | 10.00 | 60.21 | 602.1 |
| 52 | NS-GNT-DSR-85-Supply of Oxidised mild steel handles 125 mm | Each | 15.00 | 20.07 | 301.05 |
| 53 | NS-GNT-DSR-86-Supply of Oxidised mild steel handles 100 mm | Each | 10.00 | 13.38 | 133.8 |
| 54 | NS-GNT-DSR-88-Supply of Anodised Aluminium tower bolt (barrel type) 150x10 mm. | Each | 10.00 | 93.66 | 936.6 |
| 55 | NS-GNT-DSR-89-Supply of Anodised Aluminium tower bolt (barrel type) 100x10 mm. | Each | 10.00 | 46.83 | 468.3 |
| 56 | NS-GNT-DSR-90-Supply of Anodised Aluminium handles 75mm with plate 125 x 32 mm | Each | 10.00 | 29.43 | 294.3 |
| 57 | NS-GNT-DSR-91-Supply of CP Brass floor door stopper | Each | 15.00 | 374.62 | 5,619.3 |
| 58 | NS-GNT-DSR-92-Supply Aluminum floor door stopper | Each | 10.00 | 147.17 | 1,471.7 |
| 59 | NS-GNT-DSR-93-Supply of Cub board Magnets | Each | 30.00 | 16.06 | 481.8 |
| 60 | NS-GNT-DSR-94-Supply of Nails 25-100mm long | Kg | 5.00 | 113.72 | 568.6 |
| 61 | NS-GNT-DSR-95-Supply of Nails up to 25mm long | Kg | 5.00 | 113.72 | 568.6 |
| 62 | NS-GNT-DSR-96-Supply of Bright finished or black enamelled mild steel screws 40 mm | 100 Nos. | 300.00 | 80.28 | 240.84 |
| 63 | NS-GNT-DSR-97-Supply of Chromium plated brass curtain rod 25 mm dia 1.25mm thick 12 feet length | Each | 10.00 | 468.28 | 4,682.8 |
| 64 | NS-GNT-DSR-98-Supply of chromium plated brass curtain rod 25mm dia brackets. | Pair | 20.00 | 66.9 | 1,338 |
| 65 | NS-GNT-DSR-99-Supply of chromium plated brass curtain rod 20mm dia 1.25mm thick 12 ft length. | Each | 10.00 | 334.48 | 3,344.8 |
| 66 | NS-GNT-DSR-100-Supply of chromium plated brass curtain rod 20mm dia brackets. | Pair | 20.00 | 53.52 | 1,070.4 |
| 67 | NS-GNT-DSR-101-Supply of chromium plated brass coat hanger 6 handles. | Each | 5.00 | 100.35 | 501.75 |
| 68 | NS-GNT-DSR-105-Supply of water ply 12mm thick. | Square Foot | 50.00 | 86.97 | 4,348.5 |
| 69 | NS-GNT-DSR-107-Supply of Railway sunglass 6mm thick. | Square Foot | 50.00 | 110.38 | 5,519 |
| 70 | NS-GNT-DSR-109-Supply white acrylic sheet 3mm. | Square Foot | 25.00 | 160.55 | 4,013.75 |
| Schedule total | ₹11,18,909.81 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022ACS1to11-Merged-compressed1.pdf
ATTACHMENT
ZonalMasterTenderDocument2025-WithACS-11_1.pdf
ATTACHMENT
SpecialConditionsofZones2026.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
DesignMixOnsitelabandTestingofMaterials.pdf
ATTACHMENT
SiteRecordstobemaintainedport3.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .