Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.4 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder |
Tender Value
₹3.1 L
EMD Value
₹6,188
Closing Date
10 Oct 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Dean (Admin)
Institute for Plasma Research (IPR), Near Indira Bridge, Bhat, Gandhinagar-382428
Construction of Aluminium Partition and other allied works at Auxiliary Building, IPR, Bhat, Gandhinagar
2023_IPR_771127_1
IPR/TN/CIVIL-PR/03/2023
Limited
Civil Works - Buildings
Item Rate
100 days
IPR Campus, Bhat, Gandhinagar
As per Tender Documents
7 documents required · 7 mandatory
₹0
₹6,188
12 Sept 2024
13 Sept 2023
12 Oct 2023
13 Sept 2023
10 Oct 2023
30 Sept 2023
13 Sept 2023 - 21 Sept 2023
Amount
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, welding, fixing in position and applying a Yellow Zinc Chromate priming coat of approved steel primer all complete. 1. Rate to include making holes & welding as required to complete the work all as directed by the Engineer-In-Charge. 2. The hinges, bolts etc. required for completion of entire work shall be measured & paid for, under this Item only.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on M.S. plate/ Round/ Angle/ Rectangular or any other section as required to complete the work. Two or more coats on new work. Note: Actual area of painted surface of each element shall be measured and paid in square meter. Rate for the item is to be quoted considering the mode of measurement as above.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners/ S.S. Screw of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings / Sketch and the directions of Engineer-in-charge. (Glazing i.e. Glass work will be measured paid separately as an Item of this tender). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 25).
Providing and fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings/sketches, complete all as per direction of Engineer-In-Charge.
P/F 50 MM PUF insulated (Roof) Panel with Corrugation sheet at top and flat Ribbed sheet at bottom side 0.45 mm TCT colour Coated GI Sheet with PUF as Insulation Sandwich Panel in between including closing of all the ends of PUF using appropriate GI sheet of required size and shape, the panel should be manufactured by pressure injection of CFC free Polyurethane foam at 38 + 2 Kg/m3 density, in between the outer and inner steel sheet surfaces and should be supplied in single length up to 6.00 meter or as desired by Engineer in charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5 x required length) with EPDM seal, silicon sealant at joints complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost structural steel member (i.e. beam, purlin, etc.) and including cutting to size and shape wherever required including all materials labour, scaffolding, wastage, tools, tackles, equipment, transportation all complete as directed by engineer-in-charge. All overlaps shall be sealed with appropriate silicone sealants. Roof should be water tight. The PPGI Sheets shall be of minimum 240 MPA Steel grade & shall have a Zinc Coating of minimum 120 GSM as per IS 277/1992, 5-7 Microns of epoxy primer on both sides of the Sheet & Polyester top Coat of 18-20 microns on one side/outer side. The PPGI Sheets/PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Complete all as directed by the Engineer-In-Charge. Note: The clear Length x Width executed at site will be measured & paid for. Any Wastage shall not be measurement & Paid.
Providing and fixing glazing (Glass Work) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings/Sketches and the directions of engineer-in-charge . With 5 mm thick Plain glass/ float glass panes of 5 mm thickness as directed by EIC complete all as per direction of EIC.
Providing and Fixing 12mm dia & 160mm long Chemical anchored fasteners of M/s Hilti make anchor HAS-U 5.8 M12 x 160 & M/s Hilti make Injectable mortar adhesive, HIT-RE-500 for fixing of base plate of structure column/staircase/other member with existing trimix RCC flooring including necessary drilling, blowing, cleaning etc., all tools & tackles required for proper fixing of Chemical Anchor. Complete all as per Manufacture's Specification or as Directed by the Engineer-In-Charge. Note: 1.The Installation Should be done through authorised applicator and as per strictly Manufacture's Specification. 2. The quoted Rate should be inclusive of drilling through encountered reinforcement (if any) with appropriate drilling machine.
Providing and Fixing 12 mm dia & 150 mm long Chemical anchored fasteners of M/s Hilti make anchor HIT-V-5.8 M12 x 150 & M/s Hilti make Injectable mortar adhesive, HIT-HY 270- for fixing of M.S. plate of structure Beam/Rectangular Structural steel Section/other member with existing 230mm thick Brick wall including necessary drilling, blowing, cleaning, Scaffolding etc., all tools & tackles required for proper fixing of Chemical Anchor. Complete all as per Manufacture's Specification or as Directed by the Engineer-In-Charge. Note: 1.The Installation Should be done through authorised applicator and as per strictly Manufacture's Specification. 2. The quoted Rate should be inclusive of drilling through encountered reinforcement (if any) with appropriate drilling machine.
Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside IPR campus lead as per direction of Engineer-in-charge.Complete for all heights and all leads as directed by the EIC. Note: The quoted rate should be inclusive the cost of Scaffolding as required to complete the work.
Providing and laying CEMENT PLASTER 12 mm cement plaster of mix:1:4(1cement:4sand),Complete in all respect as directed by Engineer-In-Charge. Note: The Plaster should be of single coat Mala finished.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer. Note: for Internal Surface
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Note: for Internal Surface
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete, all as per manufacture's specification or as directed by the Engineer-In-Charge.
Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete all as directed by the Engineer-In-Charge.
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete all as directed by the Engineer-In-Charge.
Providing and fixing aluminium handles of 125mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium tower bolts of Size 200 x 10mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc., complete all as directed by the Engineer-In-Charge.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_810618.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .