SPL REP TO CERTAIN INTERNAL ROADS OF 618 EME BN AND INTERNAL AND EXTERNAL CIRCULAR ROAD OF APS AT KOTA MIL STN

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and not exc 50 mm deep and removal of rubbish material outside MoD Land complete all as specified and directed.

M&L for repair to potholes depth exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc; cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, using paving bitumen of grade VG-30 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) paving bitumen any penetration binder content of 4% by weight of total mix, complete all as specified and directed.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and directed.

M&L for applying evenly a priming/tack coat with cataionic bitumen emulsion of RS-1 Grade as per IS :8887 using emulsion pressure distribution on the bituminous surface @ 3 kg per 10 sqm, complete all as specified and directed.

M&L for applying evenly a priming/tack coat with cataionic bitumen emulsion of RS-1 Grade as per IS :8887 using emulsion pressure distribution on the bituminous surface @ 4 kg per 10 sqm, complete all as specified and directed.

M&L for Bituminous premixed Semi Dense Asphaltic Concrete 30 mm thick consolidated thickness with binder content of paving bitumen (VG-30) @ 5.5 % by weight of total mix including supply of filler as per design mix, spread using Mechanical sensor paver rolled and compacted with 8 to 12 ton power road roller to a required camber and gradient complete all as specified and directed. Note : (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver. (ii) Material shall be brought at site from approved / authorised Hot Mix plant at any distance. Hot mix plant shall be got approved from GE.

Material and labour for preparing concrete/bituminous surfaces and painting lines, dashes (continuous/ unintrrupted), arrows, letters etc exceeding 10 cm width with hot applied thermo plastic road marking materials not less than 5 Kg per 10 Sqm all as specified in clause 803.4 of MOSRT and H Specification, white or golden yellow (IS colour No. 356) over a coat of primer complete all using road painting machine complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Supply and fixing in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Demolition of un-reinforced cement concrete in ground floor and pavings n exc 15 cm thick (below or above ground level) and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling & mass concrete complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block glossy finish, any shape and size with grey cement & no pigment confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud , or water scoring sunken surfaces in roads cutting around edges to at least 25 mm in depath making good by applying tack coat at 5 kg per 10 sq m putting in pre-mixed bituminous macadam well rammed (including supply of premixed macadam, binder and chipping), depth of potholes not exc 30 mm complete all as specified and directed.

M&L for prepaing existing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with machenical blower and gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminious primer using paving bitumen (VG-30) grade @ 5 kg/10 Sqm on road surface by mechanical sprayer complete all as specified and directed.

S&F in repair metal tubular Delineator made out of ABS round body fitted with 02 Nos 65 mm dia, highly reflective reflector made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of red, yellow, white in colour radium tape of 25 mm wide strips with anti theft steel net including embedding in PCC (1:2:4) block of size 150 mm x 150 mm x 300 mm complete all as specified and directed.

S&F in repair Bi-Directional Reflective type Road cat eye, illuminated yellow rectangular/square shape at the centre size (100 x 115mm/100 x 100mm), made out of Thermoplactic Body fixed on road with bitumen adhensive as per manufactureer's instructions having abrasion resistance Ceramic coating and reflective surface complete all as specified and directed.

M/S SUNNY ASSOCIATE (BID ID -3485638)

AMIT RISHABH BUILDERS PRIVATE LIMITED (BID ID -3489269)