ECO Tourism Development Plan For Garadiya Mahadev View Point

Amount

Creation of Entrance Gate With Natural look at Entry Point of Garadiya (A) BSR PWD 2019 Chapter code No (1.9) Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50meter including of useful material if available.

BSR PWD 2019 Chapter code No (1.9.3) Hard Rock (blasting prohibited) useful MATERIAL 30 %

BSR PWD 2019 Chapter code No (1.10) Add extra over item No. 1.9 for every additional lift of 1.5 m or part there of. BSR PWD 2019 Chapter code No (1.10.2) in ordinary rock and hard rock.

(B) BSR PWD 2019 Chapter code No (3.2) CEMENT CONCRETE (CAST-IN- SITU): Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering -All work up to plinth level. BSR PWD 2019 Chapter code No (3.2.3) M10 grade Nominal Mix 1:3:6 ( 1Cement : 3 Coarse sand : 6 graded Stone aggregate 20mm nominal size)

(C) BSR PWD 2019 Chapter code No (6.1) Random Rubble stone masonry for with hard stone in foundation and plinth in cement Sand mortar above 30Cm thick wall in. BSR PWD 2019 Chapter code No (6.1.5) Cement Mortar 1:3 (1-Lime putty: 3- Sand).

(D) BSR PWD 2019 Chapter code No (6.2) Random Rubble stone masonry with hard stone in superstructure above plinth level and upto three levelabove 30 cm. thick walls in : BSR PWD 2019 Chapter code No (6.2.5) Cement Mortar 1:4 (1 - Cemet :4- Sand).

(E) BSR PWD 2019 Chapter code No (3.3) Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string of lacing courses, parapets, coping,bed blocks, anchor blocvks, planin window sills, fillets,levelling course etc up to floor three level excluding the cost of centering and shuttering. BSR PWD 2019 Chapter code No (3.3.2) M15 grade Nominal Mix 1: 2 :4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20MM nominal size).

(F) BSR PWD 2019 Chapter code No (12.8) Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : BSR PWD 2019 Chapter code No (12.8.1) 25 mm Thick.

(G) Non BSR The gate will be made up of the steel armature structure with a total height of 15 ft and pillars having a stone structure with bricks masonry work. As described from point no (A to F). After that, the horizontal pillar made of fiberglass material to be placed with the tree effect. There will be two vertical pillars (2.5X2.5ft) having 12 ft height and one horizontal pillar having 10 ft length. The nameplate made up of ACP sheet having a size of (1.5x6 FT) will be placed on the vertical pillar. 3D life-size fiberglass models of TIGER and Cub (2 N0S) SLOTH BEAR AND (2 NOS OF ANY BIRD) And 1 nos Aero will also be placed on top of the horizontal pillar with realistic painting and UV coating for durability.

Providing of DUSTBIN Having natural look with the fiberglass stone effect at Garadiya. the proposal for fiberglass stone DUSTBIN at Garadiya The stone (3X3 ft) casted from the fiberglass material will be the primary base for this DUSTBIN.

Development of signage with the fiberglass stone effect at Garadiya. The proposal for fiberglass stone signage at Garadiya The stone (3X3 ft) casted from the fiberglass material will be the primary base for this signage. After that, the signage (20X30 inch) of nature trail will be affixed to that stone. The signage will be made of ACP & polycarbonate sheets with iron framing, 3M vinyl printing, realistic painting, and UV coating.

POOJAN K THUMBER