COMPREHENSIVE MAINTENANCE OF INTERNAL WIRING, LIGHT FITTINGS AND FIXTURES FOR CG COMPLEX MALKAPAURAM, CG COMPLEX JETTY AND CG COMPLEX RUSHIKONDA AT VISAKHAPATNAM UNDER GE(I)(CG) VIZAG

Amount

Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc all as directed.

Dismantling of old U/S main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall all as directed.

M & L for Modular concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade (ISI marked) not less than 19 mm dia/ Casing caping of 19-20 mm with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc. including anodized standard sunken boxes as per standards as per manufacturer norms for concealed mounting with earth dolly and standard grid, crown and cover plate for fixing of switches / sockets, fan regulators, with captive screws including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing, including cutting the chasses for fixing of wiring conduit as per conduit size not more the 25 mm deep and 30 mm in width and making good the disturbed surfaces by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putty or distemper / colour wash with same existing colour surfaces all as specified and as directed by Engineer-in-Charge for one light/fan/call bell Note: The cutting chiseling and making good item will be excercised when wiring to be concealed.

All as per item No 3 here-in-before but 5/6 Amps socket Point Same board)

All as per item No 3 here-in-before but 5/6 Amps socket Point (Independent)

All as per item No 3 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and as directed.

S&F switch piano, 6/5 Amp single pole, flush type one way 230 volts complete all as specified.

S&F switch piano, 16/15 Amp single pole, flush type one way 230 volts complete all as specified.

S&F Bell push, flush type, 6/5 amp, 230 volts complete all as specified

S&F socket outlet 2 in 1, 5 pin, 6/5 Amps flush type complete all as specified.

S&F Switch Socket combination outlet 2 in 1, 6/5 Amps flush type complete all as specified..

S&F Switch Socket combination outlet 2 in 1, 3 pin, 6/5 and 16/15 Amps flush type universal complete all as specified.

S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified.

S&F gang box polycarbonated suitable for and including mounting one Switch 15 Amps and one socket 5 pin 15 Amps and with screws complete.

S&F gang box polycarbonated suitable for and including mountings one switch 5 Amps and one socket 5 pin 5 Amps and with screws complete.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed by Engr-in-Charge

S&F Modular switch 16 Amp, 1 way, 1 module size complete all as specifiedand directed by Engr-in-Charge

S&F modular Bell Push switch 6 A 1 way, 1 module size complete all as specified and directed by Engr-in-Charge

S&F Modular socket 6 Amp, 2/3 pin, 2 module size complete all as specified and directed by Engr-in-Charge

S&F Modular socket 6A/16 Amp 2/3 pin combined 2 module size complete all as specified and directed by Engr-in-Charge

S&F in replacement of Modular fan step regulator 120 W 1 module size complete all as specified and directed by Engr-in-Charge

S&F in replacement of Modular fan step regulator 120 W 2 module size complete all as specified and directed by Engr-in-Charge

S&F ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and as directed by Engr-in-Charge

S&F electronic call bell, Dingdong type, 6 Amp, 230 Volt, single pole complete all as specified and as directed by Engr-in-Charge

S & F in repairs modular AC Box(white), plug and 3 pin socket two in one, all in one type,single pole and neutral box with one single pole MCB 20 A mp 230 Volts complete all as specified at site. Make-Havells cat no. DHDMCSN0251016 or equivalent.

S&F heating element trigular/ Circular shape for geyser of capacity 1KW complete all as specified.

S&F heating element trigular/ Circular shape for geyser of capacity 2 KW complete all as specified..

S&F Thermostate for geyser complete all as specified.

S&F Capacitor 1.5/2.5/3 mfd single pahse 230V for ceiling/wall/ exhaust fan complete all as specified.

Taking down carefully ceiling fan BLDC type 1200/1400mm Sweep from existing location carrying out rewinding, replacement bearing, painting, cleaning, replacement of BLDC driver/ PCB and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in- Charge

Taking down carefully ceiling fan of Squirrel cage induction motor type 1200/1400mm Sweep from existing location carrying out rewinding, replacement bearing, painting, cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in-Charge

Taking down carefully Exhaust fan of induction motor, metal body type of Size 250mm from existing location carrying out rewinding, replacement bearing, painting, cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in-Charge

Taking down carefully Exhaust fan of induction motor, metal body type of Size 300mm from existing location carrying out rewinding, replacement bearing, painting, cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in-Charge

Taking down carefully Exhaust fan PVC body type of Size 250mm from existing location carrying out rewinding of motor incl replacement of fan, louvers shutter, motor shaft and frame cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in- Charge

Taking down carefully Exhaust fan PVC body type of Size 300mm from existing location carrying out rewinding of motor incl replacement of fan, louvers shutter, motor shaft and frame cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in- Charge

S&F MCB DB TPN 4 ways double door, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by Engr-in-Charge

S&F MCB DB SPN 8 ways double door, powder coated including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by Engr-in-Charge

S&F MCB DB SPN 4 ways double door, powder coated including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by Engr-in-Charge

S&F MCB 40-63 Amps, TPN, 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F MCB 40 to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed

S&F MCB 6 to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S & F in repairs 4 pole RCCB/ELCB 40 Amps with 30 mili Amp 415 V 50 Hz Complete all as specifies and directed

S & F in repairs 4 pole RCCB/ELCB 60 Amps with 30 mili Amp 415 V 50 Hz Complete all as specifies and directed

S & F in repairs 4 pole RCCB/ELCB 100 Amps with 30 mili Amp 415 V 50 Hz Complete all as specifies and directed

S&F sub-main wiring concealed on wall or ceiling with PVC insulated & unsheathed four run of 10.00 Sqmm single core multi stranded copper conductor cable (FRLSH). 1100 Volt grade alongwith one run of 10.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including non metallic rigid PVC conduit of adequate size with all accessories including taking down existing burnt sub main wiring complete all as specified and as directed. Notes: (i) Five runs of 10 Sqmm cable and one run of Conduit shall be measured as one unit for payment purpose. (ii) Cutting chases shall deemed to be included in quoted rate.

All as per Srl Item No. 46 here-in-before but sub-main wiring concealed on wall or ceiling with PVC insulated & unsheathed two run of 6.00 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH).

All as per Srl Item No. 46 here-in-before but sub-main wiring concealed on wall or ceiling with PVC insulated & unsheathed two run of 4.00 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH).

S&F in repair Plug top 3 x 15A universal made in PVC body Complete all as specified and as directed.

S&F in repair Plug top 3 x 5A universal made in PVC body Complete all as specified and as directed

S&F lamp holder, PVC / Polycarbonate type with PVC round / square back block/plate suitable for batten fittings including taking down old unserviceable one complete all as specified and as directed.

S&F Constant current driver suitable for 10/15 watt round shape LED lights, input voltage-230V, 50 Hz, input current-0.055A, output voltage-34-40 V DC, output Current 0.300 A DC complete make- Wipro/Crompton/Havells/Bajaj

S&F 7-10 watt LED lamp suitable for lamp holder and decorative bracket wall light fittings complete all as specified and as directed.

S&F 12-15 watt LED lamp suitable for lamp holder and decorative bracket wall light fittings complete all as specified and as directed.

S&F Flexible led strips 24 Watt 6 K, not less than 5 mtr with uniform light Ea distribution and long lasting adhesive for perfect cove lighting solution, complete with all accessories & Provn of flaxible two core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as directed Make Havells LHEHDLP7UN1W024 or equivalant Philips/Crompton

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light/ batten type connecting up with three core flexible copper conductor cable of suitable size from celling rose complete all as specified and as directed.

S&F LED Mirror lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light/ batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for 9/10 W retrofit LED lamp B22 base Including LED lamp complete with all accessories and fixing the fitting on wall including all necessary fixing accessories complete all as directed Make Havells LHDL02160099 or equivalant Philips/Crompton

S&F round shape 10/12 watt 6" Size 220 volts AC recessed/Surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof/ ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F round shape 6 watt 220 volts AC recessed/Surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof/ ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F LED luminaire 600 mm x 600 mm (2'x2'), 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade). wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed

PRADEEP ENTERPRISES (BID ID -3093686)

ANJANA ENTERPRISES (BID ID -3085005)

SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -3094232)

Sri krishna constructions (BID ID -3086911)

JAHNAVI ASSOCIATES (BID ID -3087765)

ANAND ENTERPRISES AND ENGINEERS (BID ID -3087146)