Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | ₹8.6 L | L1 | Accepted-AOC L1 Accepted for further proceedings |
| 2 | L2₹8.9 L+₹34,210.66 (3.99%)Rejected-Finance | ₹8.9 L+₹34,210.66 (3.99%) | L2 | Rejected-Finance L2 |
| 3 | L3₹8.9 L+₹35,185.66 (4.11%)Rejected-Finance | ₹8.9 L+₹35,185.66 (4.11%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Abdulnazir K L1 | P. MOHAMMED L2 | K. Abdul Rahim L3 |
|---|---|---|---|---|---|---|
| 1.00Parking area | ||||||
| 1.01 | 16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.
paver block of M-30 grade with approved color design and pattern | 227.5 | sqm | 1,164.65 ₹2,64,958.79 Lowest | 1,164.77 ₹2,64,985.18 | 1,164.77 ₹2,64,985.18 |
| 1.02 | 10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 900 | sqm | 178.42 ₹1,60,579.8 Lowest | 178.44 ₹1,60,596 | 178.44 ₹1,60,596 |
| 1.03 | 12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | 90 | sqm | 773.44 ₹69,609.87 Lowest | 773.52 ₹69,616.8 | 773.52 ₹69,616.8 |
| 1.04 | 12.51.6
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete
:Gutter (600 mm over all girth) | 21 | sqm | 1,279.1 ₹26,861.14 Lowest | 1,279.23 ₹26,863.83 | 1,279.23 ₹26,863.83 |
| 1.05 | 2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | 24.75 | sqm | 292.49 ₹7,239.15 Lowest | 292.52 ₹7,239.87 | 292.52 ₹7,239.87 |
| 1.06 | 4.1.3
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse
sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm
nominal size derived from natural sources) | 5.48 | sqm | 8,482.56 ₹46,475.96 Lowest | 8,483.41 ₹46,480.6 | 8,483.41 ₹46,480.6 |
| 1.07 | 50.18.9.10.1
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent
cement, trenching , refilling & testing of joints complete as per direction of
Engineer in Charge. 150 mm dia 6 Kgf/cm2 | 48 | sqm | 934.25 ₹44,843.86 Lowest | 934.34 ₹44,848.32 | 934.34 ₹44,848.32 |
| 1.08 | 2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)
including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5
m, as directed by Engineer-in-charge.All kinds of soil | 24 | sqm | 236.61 ₹5,678.54 Lowest | 236.63 ₹5,679.12 | 236.63 ₹5,679.12 |
| 1.09 | 60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site | 19.5 | sqm | 3,667.7 ₹71,520.21 Lowest | 3,668.07 ₹71,527.37 | 3,668.07 ₹71,527.37 |
Tender Value
₹8.6 L
EMD Value
₹21,424
Closing Date
21 May 2026, 5:00 pmClosed
Unit In-Charge / Unit Head
STEEL INDUSTRIALS KERALA LTD. Ship Breaking Unit, Beypore, Kozhikode - 673015
Govt Law College Parking area Govt Law College Parking area Renovation work of Parking area in Mens Hostel at Govt Law College Kozhikode
2026_SILK_850881_1
SILK/SBU(B)/F-637/2025-26/054
Open Tender
Miscellaneous Works
Item Rate
180 days
Kozhikode
As per the tender documents
6 documents required · 6 mandatory
₹2,022
₹21,424
Yes
18 Sept 2026
14 May 2026
22 May 2026
14 May 2026
21 May 2026
14 May 2026
14 May 2026 - 21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Parking area | |||||
| 1.01 | 16.91.2
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C.
paver block of M-30 grade with approved color design and pattern | 227.5 | sqm | - | - |
| 1.02 | 10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | - | sqm | - | - |
| 1.03 | 12.50
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.04 | 12.51.6
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm
(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in
240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete
:Gutter (600 mm over all girth) | - | sqm | - | - |
| 1.05 | 2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | - | sqm | - | - |
| 1.06 | 4.1.3
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse
sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm
nominal size derived from natural sources) | - | sqm | - | - |
| 1.07 | 50.18.9.10.1
Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent
cement, trenching , refilling & testing of joints complete as per direction of
Engineer in Charge. 150 mm dia 6 Kgf/cm2 | - | sqm | - | - |
| 1.08 | 2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)
including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5
m, as directed by Engineer-in-charge.All kinds of soil | - | sqm | - | - |
| 1.09 | 60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site | - | sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
GCC.pdf
Tender Documents • 0.45 MB
PROFILE.pdf
Additional Documents • 0.03 MB
BOQ_1437725.xls
BOQ • 0.29 MB
850881D.pdf
PDF • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .