Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-Finance HOUSING COLONY UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-Finance lowest | |
| 2 | L2₹1.2 L+₹8,800 (7.82%)Rejected-Finance | L2 | Rejected-Finance not lowest | |
| 3 | L3₹1.4 L+₹29,500 (26.2%)Rejected-Finance BHAGWATI NAGAR JAMMU | L3 | Rejected-Finance not lowest | |
| 4 | L4₹1.5 L+₹33,200 (29.5%)Rejected-Finance BYE PASS N H NEAR STATE BANK OF INDIA SIDHRA JAMMU | L4 | Rejected-Finance not lowest |
| Sl No | Description | Qty | Unit | BEE AAR ENTERPRISES L3 | M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS L2 | M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS L1 | GS ENGG WORKS L4 |
|---|---|---|---|---|---|---|---|
| 1.00Repairs of 10cusec x 10 meter Head pump and 60 HP motor of unit 4 along with allied works at LIS Ismailpur. | |||||||
| 1.01 | Decoupling of 10 cusec x 10 meter head pump, 60hp motor of unit No. 4, shifting of pump to nearest roadside using manual labour, ropes, chain pulley etc, loading in mechanical transport vehicle and then carriage to workshop for repairs. After complete repairs back shifting of pump to site of installation i.e. LIS Ismailpur. The job includes labour charges for carriage, shifting , loading and unloading of the decoupled machinery and also hire charges of vehicle to workshop (to & fro).All the tools and tackles are to be arranged by firm at site as well as in the workshop. Repairs to 10 cusec x 10 meter head of unit 4 at workshop by way of dismantling of top cover of split casing pump, extraction of old and worn out parts /damaged parts i.e bearings, sleeves, check nut, gland packing, gasket, gland bushes, pump shaft, impeller. Re-building/repair to impeller by way of brazing, filling of pitted vanes and finishing to accurate size. Providing and fitting of new pump shaft as per sample. P/F gland bushes-02Nos., check nuts- 02Nos. bearings -02 Nos. and sleeves – 02 Nos. Repair to pump housing along with providing of new air release valve. Reassembling all parts of pump with proper greasing and service of bearing housing along with suitable gland packing, oil paper and filling of m-oil in pump. Job includes fabrication of new gland plate set as per sample, nuts& bolts as required at site. Providing and fitting of new bearings (DE & NDE) on motor along with complete greasing of the bearing. Fitting of new coupling pulley set of unit 4 as per sample and according to size of motor and pump shaft, finishing key ways (both HC pump and motor side) and then providing fitting of new keys and then coupling both pump and motor and checking their alignment .Repair to junction box of motor and thimbling the cable ends and giving proper connection to motor from panel and checking it at full load. Job includes cost of material, labour charges, installation and testing on full load condition at site. Fabrication and fixing of MS angle frame inside pump room made up of MS angle with cross arms for fixing the frame in wall with anchoring bolts /PCC duly fitted with wall of LIS Ismailpur suitable for fixing 300 Amp main switch. The job includes repair to 300Amp.by fitting new HRC fuse link set, fitting of new spring based side handle and fixing of Bakelite sheet. Fitting of main switch on MS frame at suitable place and giving connections to it with existing incoming cables on one side and LT fuse set on other side after cutting dressing, thimbling and crimping of cable ends. Providing /Fitting of aluminium cables of requisite capacity (50sqmm) and length (100 meter) from transformer to main switch in place of old damaged cable.The job includes giving connection of main cable from transformer to main switch after extraction of old damaged cable. Making all electrical connections and testing the main switch on full load at site The job includes cost of material, skilled labour, shifting, transportation, installation charges and testing. Job also includes providing/fitting for 02 no. 50 watt LED flood light and 08 no. led bulbs to make station operational at night.Repair to sluice valve 12 inch. dia at LIS Ismailpur by way of fabrication and fitting of stem rod with nut 01 no, fabrication/fitting of body seat ring 01 no, GM ring for flap 01 no. fabrication and fitting of gland bracket with gland stud/nut one set as per sample. Replacement of bolt, nuts &rubber gaskets. P/f of gland packing. Repair to reflux valve 12 inch. dia. of rising main at LIS Ismailpur by way of fabrication/fitting of face and seat ring 01 no, repair to flap and fitting of gland bracket with gland stud/nut one set as per sample. Replacement of bolt, nuts &rubber gaskets. P/F of gland packing. The job also includes plugging the leakages along the flanges. Complete job includes cost of material, transportation charges, tools and tackles, labour to be employed at site and all kinds of taxes . | 1 | Job | 1,42,000 ₹1,42,000 | 1,21,300 ₹1,21,300 | 1,12,500 ₹1,12,500 Lowest | 1,45,700 ₹1,45,700 |
| 1.02 | Rebate on Old Parts | 1 | Job | -2,840 ₹-2,840 | -2,426 ₹-2,426 | -2,250 ₹-2,250 | -2,914 ₹-2,914 |
Tender Value
₹1.5 L
EMD Value
₹2,960
Closing Date
30 Jul 2025, 2:00 pmClosed
XEN MID JAMMU
MID JAMMU
Repairs of 10cusec x 10 meter Head pump and 60 HP motor of unit 4 along with allied works at LIS Ismailpur.
2025_IFC_280903_1
MID/J/e-NIT/2025-26/33
Open Tender
Repair and Maintenance Works
Item Wise
7 days
Ismailpur
as per eNIT
8 documents required · 8 mandatory
₹200
Executive Engineer MID JAMMU
₹2,960
26 Nov 2025
9 Jul 2025
31 Jul 2025
9 Jul 2025
30 Jul 2025
10 Jul 2025
Repairs of 10cusec x 10 meter Head pump and 60 HP motor of unit 4 along with allied works at LIS Ismailpur.
Decoupling of 10 cusec x 10 meter head pump, 60hp motor of unit No. 4, shifting of pump to nearest roadside using manual labour, ropes, chain pulley etc, loading in mechanical transport vehicle and then carriage to workshop for repairs. After complete repairs back shifting of pump to site of installation i.e. LIS Ismailpur. The job includes labour charges for carriage, shifting , loading and unloading of the decoupled machinery and also hire charges of vehicle to workshop (to & fro).All the tools and tackles are to be arranged by firm at site as well as in the workshop. Repairs to 10 cusec x 10 meter head of unit 4 at workshop by way of dismantling of top cover of split casing pump, extraction of old and worn out parts /damaged parts i.e bearings, sleeves, check nut, gland packing, gasket, gland bushes, pump shaft, impeller. Re-building/repair to impeller by way of brazing, filling of pitted vanes and finishing to accurate size. Providing and fitting of new pump shaft as per sample. P/F gland bushes-02Nos., check nuts- 02Nos. bearings -02 Nos. and sleeves – 02 Nos. Repair to pump housing along with providing of new air release valve. Reassembling all parts of pump with proper greasing and service of bearing housing along with suitable gland packing, oil paper and filling of m-oil in pump. Job includes fabrication of new gland plate set as per sample, nuts& bolts as required at site. Providing and fitting of new bearings (DE & NDE) on motor along with complete greasing of the bearing. Fitting of new coupling pulley set of unit 4 as per sample and according to size of motor and pump shaft, finishing key ways (both HC pump and motor side) and then providing fitting of new keys and then coupling both pump and motor and checking their alignment .Repair to junction box of motor and thimbling the cable ends and giving proper connection to motor from panel and checking it at full load. Job includes cost of material, labour charges, installation and testing on full load condition at site. Fabrication and fixing of MS angle frame inside pump room made up of MS angle with cross arms for fixing the frame in wall with anchoring bolts /PCC duly fitted with wall of LIS Ismailpur suitable for fixing 300 Amp main switch. The job includes repair to 300Amp.by fitting new HRC fuse link set, fitting of new spring based side handle and fixing of Bakelite sheet. Fitting of main switch on MS frame at suitable place and giving connections to it with existing incoming cables on one side and LT fuse set on other side after cutting dressing, thimbling and crimping of cable ends. Providing /Fitting of aluminium cables of requisite capacity (50sqmm) and length (100 meter) from transformer to main switch in place of old damaged cable.The job includes giving connection of main cable from transformer to main switch after extraction of old damaged cable. Making all electrical connections and testing the main switch on full load at site The job includes cost of material, skilled labour, shifting, transportation, installation charges and testing. Job also includes providing/fitting for 02 no. 50 watt LED flood light and 08 no. led bulbs to make station operational at night.Repair to sluice valve 12 inch. dia at LIS Ismailpur by way of fabrication and fitting of stem rod with nut 01 no, fabrication/fitting of body seat ring 01 no, GM ring for flap 01 no. fabrication and fitting of gland bracket with gland stud/nut one set as per sample. Replacement of bolt, nuts &rubber gaskets. P/f of gland packing. Repair to reflux valve 12 inch. dia. of rising main at LIS Ismailpur by way of fabrication/fitting of face and seat ring 01 no, repair to flap and fitting of gland bracket with gland stud/nut one set as per sample. Replacement of bolt, nuts &rubber gaskets. P/F of gland packing. The job also includes plugging the leakages along the flanges. Complete job includes cost of material, transportation charges, tools and tackles, labour to be employed at site and all kinds of taxes .
Rebate on Old Parts
M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS (BID ID -2424089)
BEE AAR ENTERPRISES (BID ID -2426389)
GS ENGG WORKS (BID ID -2427659)
GS ENGG WORKS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .