Provision of certain civil works Infrastructural facilities for armament Up-gradation project (693 vehicles) in Bldg. No. 9 AND 10 inside factory area at OFMK

Amount

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15cm thcikness below or above ground level, complete all as specified and directed by EIC

Demolition of brick work or stone /boulder masonry built in cement mortal including all quoins, arches, pillars, etc. complete all as specified and directed by EIC

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. complete all as specified and directed by EIC

Surface excavation in hard/dense soil n.exc (not exceeding ) 30 cm deep and averaging 15CM deep and getting out inclulding all as specified and directed by EIC.

Site clearance in soft/loose soil complete all as specified and directed.

Excavation over areas in hard/dense soil not exceeding 1.5 m depth and getting out, spreading/levelled, complete all as specified and directed.

Excavation over areas in hard rock not exceeding 1.5 m depth and getting out, spreading/levelled, complete all as specified and directed.

EXCAVATION: Excavation in trenches in hard rock not exceeding 1.5m width and 1.5m depth and getting out and carting the same to the location as shown by EIC/SIC.

EXCAVATION: Excavation in trenches in in hard/dense soil not exceeding 1.5m width and 1.5m depth and getting out and carting the same to the location as shown by EIC/SIC

FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site

GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 mm and not exceeding 150 mm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site.

REMOVING OF EXCAVATED MATERIAL Removal of excavated material to a distance exceeding 500M but not exceding 1.0 KM and deposting where directed, complete all specified and directed.

MOORUM : Supply and filling of Moorum/Red Bajri, filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed..

Hardcore of gauge n exc. 63 mm, using broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. complete all specified and directed.

STONE MASONRY : Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6. complete all specified and directed.

Pointing: Flush pointing to squared rubble masonry, coursed or uncoursed in cement mortar 1:4. complete all specified and directed.

PCC : M&L - Plain Cement concrete (1:4:8), type D2 with 40 mm graded aggregate, in foundation, filling and mass concrete . complete all specified and directed.

RCC : Reinforced Cement Concrete type B1, 1:2:4 mix by using 20 mm graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and massconcrete, complete all as directed and specified.

RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc.Complete all as specified and directed.

RCC :M&L - Reinforced Cement Concrete , Type B1, 1:2:4 Mix by using 20mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed

PCC : M&L - Plain Cement concrete 1:2:4 , type B2 with 40 mm graded aggregate, in foundation, filling and mass concrete, complete all as specified and directed.

WATERPROOFING : Supply only of liquid waterproofing compound. Make: Dr. Fixit, BASF, SIKA

REINFORCEMENT : Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Make: Tata/ Jindal/ Vizag steel (SAIL). complete all specified and directed.

FORMWORK : Formwork flat surfaces with fair finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams,slabs sides and soffits of foundations and plinth beams; and similar work; vertical or to batter. complete all specified and directed.

BRICKWORK - Brickwork with sub class B bricks in 1:4 cement mortar, straight or curved in plan exc. 6 m mean radius, built in all as specified and directed.

HALF-BRICKWORK : Brickwork with sub class B bricks, built in 1:4 cement mortar, straight or curved in plan to any radius in half brick thick walls, built in all as specified and directed.

PLASTERING : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed.

PLASTERING :Rendering 10 mm thick cement plaster 1:4 on fair faces in ceiling concrete surfaces including provision of border and creation of raised portions etc. complete all as specified

PCC FLOORING : PCC 1:4:8 in floors/ paving of type D-2, 1:4:8 with 40mm graded aggregate, 75 mm thick . Concreting should be done in panels as directed. Complete all as specified and directed.

PCC FLOORING : PCC 1:2:4 in floors/ paving of type B-1, 1:2:4 with 20mm graded aggregate, 70 mm thick . Concreting should be done in panels as directed. Complete all as specified and directed.

RCC : Providing precast Cement Concrete solid building blocks of grade B1, 1:2:4 mix or slabs 10cm thick setting in CM (1:4)complete , all as directed and specified

GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed.

FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell

SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed.

WALL TILES : Supply & fixing of Coloured glazed ceramic tiles in vertical surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell.

FAIR CUTTING OF GROOVES: Fair cutting of grooves not exceeding 10 cm width or girth on exposed surfaces of brickwork or concrete surface such as in splays, chamfers etc. including rubbed finish and waste for laying water supply lines or electrical lenes of concealed nature complete all as specified.

PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like "T", "Y" junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like "T", "Y" junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed.

SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade 'A', including laying in proper slopes, including jointing with cement and jute complete all as specified and directed.

S & F of G.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches.

S & F of G.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches.

S & F of G.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches.

Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex

BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed.

FLOAT VALVES : 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms. Complete all as specified and directed.

NAHANI TRAPS : Supply & Fixing of CI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4 complete all as specified and directed at site.

GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified.

GRATING : Supply and fixing of grating doom 100 mm dia. Of PTMT (min. weight 25 gms)

PVC door frame : S & F of solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing.complete all specified and directed.

PVC door shutter : S & F of Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

ALDROP : Supply and fixing of Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. All as specified and directed

HINGES : Supply and fixing of extruded Al. alloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed type B-21 of size 125mm including all as specified and directed .

TOWER BOLT : Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 125 mm and fixed all as directed.

BOW HANDLE: Supply & fixing of Extruded aluminium alloy handles 150 mm long, fabricated type, anodised. Complete all as specified and directed

UPVC window / Ventelator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete alla s specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,

UPVC window : Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing rame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

UPVC window : Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth 0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed

PVC PARTITION : 40mm thick Solid PVC Sandwich Panel with lmm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing. Complete all as specified and directed

Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane. Complete all as specified and directed by EIC.

Structural steel work : Supply and erection of framed work as in doors or gates of angle or other section with gusset pla tes, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. steel conforming to Fe.410 W .Gde-E-250 quality B. including application of of one coat of zinc chromate primer paint. Complete all as specified and directed

Structural steel work : Supply and erection using Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Steel conforming to Fe.410 W .Gde-E-250 quality B. including application of of one coat of zinc chromate primer paint. Complete all as specified and directed

Welded wire mesh : Supply and fixing of Welded steel wire fabric of weight not exc. 4.0 kg per sqm, supplied and fixed complete to wood or steel members. complete all as specified and directed.

STRUCTURAL STEEL (S&F) : Structural steel work in Plates (Plain or Chequered ) channels, square cut or notched ordinary and counter sunk) forming holes, wihtout any attachment and application of one shop coat of zinc chromate primer paint. Complete all as specified directed.

Dismantlingof structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed.

Snap grid : Supply and fixing Anodised aluminium snap grid frame work for false ceiling, grid size. 605x605 all as specified. complete all as specified and directed

Snap grid : Supply and fixing of 605x605 mm snap grid Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specifiedand directed, Make : Armstrong

Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material 8 mm thk. reinforced with cellulose fibre for fixing in 600 mm x 600mm grid Make: Gyproc/ Lagyp

ALUMINIUM PARTITIONS : Supply and fixing complete of anodised aluminium powder coated frames for partition frames and windows etc. all complete as directed by E.I.C.

PARTICLE BOARDS : Supply and Fixing of Pre-laminated particle board of 12mm thick, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including all as specified and directed by EIC.

ALUMINIUM WINDOW SHUTTERS : Supply and fixing complete of anodised aluminium window and ventilator shutters powder coated fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary jointig cleats, glazing clips, rubber neoprane packing, handles 2 nos. in each door, hinges, anodised aluminium snap beading, screws etc. complete all as directed by E.I.C.

PVC sheet : Supply and fixing of PVC tiles/ sheets, 2.0 mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubbed based adhesive in floors. complete all as specified and directed

OBD ON WALLS : M&L :Distempering walls with distemper oil emulsion(2 coats), with a coat of clearcolle primer with colour matching with existing colour or as specified. Brand: Asian Paints Tractor Uno/ Nerolac Beauty/ Berger Bison. complete all as specified and directed

ENAMEL PAINTING : Rendering synthetic enamel painting on Steel surfaces surfaces of any description over 10 cm width or girth including application of one coat of red oxide zionc chrome primer - TWO coats of enamelpaint, Make: Asian.complete all as specified and directed

WEATHERPROOF PAINT : Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm Make: Asian Paints Apex/ Berger Weathershield/ Nerolac Excel. complete all as specified and directed

Taking Down : Taking Down carefully copper/Aluminium point wiring (light ,Fan ,Socket, power point ) complete (fittings such as switches, ceiling roses, pendents, regulators, sockets, etc to be measured seperately) removing mateiral to store for keeping in safe custody for reuse at site and making good ,disturbed surfaces of walls ,floors etc as per the instructions of EIC.

Taking Down : Taking Down carefully by unscrewing from board /outlets boxes fittings and fixtures such as switches ,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tubelight fittings and regulatorsetc for reuse at site or carrying to the store ( to be measured only when found serviciable in all respect complete for reuse as per instructions of EIC.

point wiring: Supply and fixing /Drawing of cables in PVC pipe of 1"or 3/4 " Dia ,one Light point or one fan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FRLS single core sheathed PVC cable Make Finolex/Havells/polycab in PVC concealed conduit wiring ,includes all accessories like bends ,tees ,screws ,clips ,plugs,clamps,junction boxes ,cutting holes in or through walls ,fixing of wooden boards ,earth wire and nuetral etc and testing as specified all connections to be given by copper Pin/ eye type lugs including for earth connections complete all as specified by EIC.

point wiring: Supply and fixing /Drawing of cables to one 3 pin socket outlet 5 amps independent on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FRLS single core sheathed PVC cable concealed conduit wiring Make Finolex/Havells/ polycab. complete all as specified and directed

point wiring: Supply and fixing /Drawing of cables in PVC pipe of 1"or 3/4 " Dia ,one 3 pin socket outlet 5 amps independent, with cables 1.5 sq.mm size of copper conductor cables FRLS single core sheathed PVC cable Make Finolex/Havells/polycab in PVC conduit ,includes all accessories like bends ,tees ,screws ,clips ,plugs, clamps, junction boxes ,cutting holes in or through walls ,fixing of wooden boards ,earth wire and all connections to be given by copper Pin/ eye type lugs including for earth connections etc, and testing as specified by EIC.

point wiring: Supply and fixing /Drawing of cables in PVC pipe of 1"or 3/4 " Dia ,one 3 pin socket outlet 5 amps independent, with cables 2.5 sq.mm size of copper conductor cables FRLS single core sheathed PVC cable Make Finolex/Havells/polycab in PVC conduit ,includes all accessories like bends ,tees ,screws ,clips ,plugs, clamps, junction boxes ,cutting holes in or through walls ,fixing of wooden boards ,earth wire and all connections to be given by copper Pin/ eye type lugs including for earth connections etc, and testing as specified by EIC.

point wiring: Supply and fixing /Drawing of cables in PVC pipe of 1"or 3/4 " Dia ,one 3 pin socket outlet 15 amps independent, with 4.0 sq.mm size of copper conductor cables FRLS single core sheathed PVC cable Make Finolex/Havells/ polycab/ L&T in PVC concealed conduit wiring ,includes all accessories like bends ,tees ,screws ,clips ,plugs,clamps,junction boxes ,cutting holes in or through walls ,fixing of wooden boards ,earth wire. All connections to be given by copper Pin/ eye type lugs including for earth connections etc, and testing as specified by EIC 's technical instructions amended from time to time.

ceiling rose : M&L of ceiling rose, PVC/Polycorbonate,3 phase terminal Make Anchor / Havells/Maru of ISI quality.

MCB :Supply and fixing of MCB, 240 V, single pole 5 to 40 Amp Make legrand/Schneider/Indoasian/Havells of ISI quality.All connections to be given by copper Pin/ eye type lugs including for earth connections

MCB :Supply and fixing of MCB, 240 V, DP 40 amp. Make legrand/Schneider/Indoasian/Havells of ISI quality.All connections to be given by copper Pin/ eye type lugs including for earth connections

MCB :Supply and fixing of MCB, 415 V, TPN 63 Amp. Make legrand/ Schneider /Indoasian/Havells of ISI quality.All connections to be given by copper Pin/ eye type lugs including for earth connections

MCB :Supply and fixing of MCB, 415 V, 63 Amp. Four pole Make legrand/ Schneider /Indoasian/Havells of ISI quality.All connections to be given by copper Pin/ eye type lugs including for earth connections

MCCB :Supply and fixing of MCCB, four pole, 415 V, 160 Amps with breaking capacity 36 KA. Make legrand/ Schneider /Indoasian/Havells of ISI quality. All connections to be given by copper Pin/ eye type lugs including for earth connections

MCB D.B :Supply and fixing of Sheet Metal enclousers for MCB D.B of double door of TPN, 6 way, 415 V, phase distribution type including Grouting into the wall neatly and terminate all cables neatly with cable glands and lugs Make legrand/Schneider/Indoasian/ Havells complete all as specified by EIC.

MCB D.B :Supply and fixing of Sheet Metal enclousers for MCB D.B of double door of SPN, 8 way, 240 V, phase distribution type including Grouting into the wall neatly and terminate all cables neatly with cable glands and lugs Make legrand/Schneider/Indoasian/ Havells. Complete all as specified by EIC.

MCB D.B :Supply and fixing of Sheet Metal enclousers for MCB D.B of double door of TPN, 8 way, 415 V, phase distribution type including Grouting into the wall neatly and terminate all cables neatly with cable glands and lugs Make legrand/Schneider/Indoasian/ Havells complete all as specified by EIC.

MCB D.B :Supply and fixing of Sheet Metal enclousers for MCB D.B of double door of TPN, 12 way, 415 V, phase distribution type including Grouting into the wall neatly and terminate all cables neatly with cable glands and lugs Make legrand/Schneider/Indoasian/ Havells complete all as specified by EIC.

Industrial socket plug: Supply and fixing of Single pole and neutral, 240 V, 20 amps, enclosure with a two pin and earth plug and socket complete with one single pole MCB Make Schneider/Indoasian/Legrand. complete all as specified and directed

SUB MAIN WIRING : Supply and fixing of wiring for Sub Main wiring along with earth wire with following sizes of FR PVC Insulated copper conductor single core cable 4x6.0 Sq.mm + 1x6 sq.mm earth wire in PVC concelead Conduit wiring .Make: Finolex/Havells /polycab complete all as specified by the EIC

SUB MAIN WIRING : Supply and fixing of wiring for Sub Main wiring along with earth wire with following sizes of FR PVC Insulated copper conductor single core cable 2x2.5 Sq.mm + 2x1.5 sq.mm earth wire in PVC Conduit wiring .Make: Finolex/Havells /polycab/L&T complete all as specified by the EIC

Switch Modular : Supply and Fixing of switch modular type of one way 6 amps make Legrand/Schneider/Havells of ISI quality complete all as specifies by the EIC

SOCKET MODULAR : Supply and Fixing of socket 2 in 1 , 2/3 pin 6 amps combined 2 modular type make Legrand/Schneider/Havells of ISI quality complete all as specified by the EIC

SOCKET MODULAR : Supply and Fixing of socket 2 in 1 , 2/3 pin 16 amps combined 2 modular type make Legrand/Schneider/Havells of ISI quality complete all as specified by the EIC

SWITCH MODULAR : Supply and Fixing of switch modular type of one way 16 amps make Legrand/ Schneider/Havells of ISI quality complete all as specifies by the EIC

MODULAR BELL PUSH: Supply and Fixing of modular bell push 6 amps Modular type Make:Legrand/ Schneider/Havells

Modular Fan Regulator: Material and Labour for fan step regulator, 120watt , 2 module Make Havells/ Schneider/ Legrand

COVERING PLATES WITH FRAME : Supply and Fixing of covering plates with frames of 4 module of make Legrand/ Schneider /Havells complete all as specified by the EIC

METAL FLUSH BOX : Supply and Fixing of 4 module metal flush box for mounting switches and sockets cable terminations neatly with lugs, grouted into the wall complete all as specified Make Legrand/ Schneider/ Havells complete all as specified by the EIC

LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix

LED DOWN LIGHT : Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser down light 3 in 1 cool day light/warm light soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Philips/CG/Wipro/ Osram/Havells/ Orient /Halonix

LED DOWN LIGHT : Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light cool day light/ warm white light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Philips/CG/Wipro/ Osram/Havells/ Orient/Halonix

Ceiling Fan(BLDC):Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Make : CG/Havells/Orient/Usha

EARTHING : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and directed

Earth continuity conductor : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip. complete all as specified and directed

LED Street Light :Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/Halonix.complete all as specified and directed

Exhaust Fan: Supply and Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding of sweep 250mm.complete all as specified and directed.

Cutting Chases: Cutting chases , pinning in, making good to facings where required and pointing in cement mortor 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good , cutting not exceding 10 cm girth.complete all as specified by the EIC

MCCB enclosure :Supply and fixing of MCCB enclosure suitable for 3 pole,415 V, adjustable type 250 AMPS with breaking capacity of 36 KA. Make : legrand/ Schneider /Indoasian/Havells of ISI quality. Complete all as specified by EIC.

Fan Hook: Supply and Fixing of Fan hook with double anchor bolt complete fixing as per instructions of EIC.

INDUSTRIAL FAN: Industrial fan wall mounting/pillar mounting with 3 blade including wire guard and stand .24"(600 mm),950 rpm,1-phase 230 volt ac with startor,make:Almonard/EPC/Crompton Greaves/Orient/Havells/Bajaj/USHA

Switch board box with frame plate and cover plate , metal flush box18 module : Supply and Fixing of covering plates with Metal Flush box and cover plate frames of 18 module of make Legrand/ Schneider/ Havells complete all as specified by the EIC

Street light fitting angular bracket pipe : Street light fitting fixing pipe complete with 1.5 m long G.I. pipe 40 mm dia for security light complete all as specified by the EIC.

EWC : EWC floor standing with S trap and soft closing seat cover Make: Jaquar(Continental)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed.

IWC : IWC of approved make fixed with P trap Make: Hindware/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed.

URINAL : Sensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed.

WASH BASIN : Under counter Wash basin of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make: Jaquar(Continental)/ Cera(Clair)/ Parryware(Prime). Complete all as specified and directed.

PILLAR COCK : Pillar cock 15 mm dia bore with auto closing system of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed.

CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware(Prime)/ Cera(Fountain). Complete all as specified and directed.

2 WAY ANGLE COCK : CP 2 way angle cock 15 mm dia bore Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed.

EWC JET FAUCET : EWC jet faucet 15 mm dia bore along with 1.0 mtr long connecting pipe of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed.

BIB COCK : CP Bib cock 15 mm dia bore of make: Jaquar(Solo)/ Parrywaare(Uno)/ Cera(Fountain). Complete all as specified and directed.

SOAP DISH : SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed.

SHOWER : CP Overhead shower of size 100 mm dia of head Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed.

CONCEALED STOP COCK : CP Concealed stop cock 15 mm dia bore of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed.

LED TUBE LIGHT: Supply and fixing of LED tube light with fixture of 230V, 18-22 watt, with better thermal management with not less than 100 lumens per watt. Make: CG/Philips/Syska/Bajaj/Surya/Havells. complete all as specified by the EIC

yaralagadda ramesh (BID ID -748803)