Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.6 Cr
EMD Value
₹19.2 L
Closing Date
26 Nov 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
O/o Executive Engineer, B and R Division, HPPWD, Joginder Nagar
(Sub Head - Construction of Sub-Structure, Super Structure and both side approaches
2025_PWD_120859_1
PW-JND-B and R-EA-I-NIT- 12865-12914 dated 15/11/2025
Open Tender
Civil Works - Roads
Percentage
365 days
Bharmera
As Per SBD Documents
12 documents required · 12 mandatory
₹1 L
₹19.2 L
25 Nov 2025
19 Nov 2025
27 Nov 2025
19 Nov 2025
26 Nov 2025
19 Nov 2025
Providing and laying Reinforced Cement Concrete (R.C.C) M 25 (thirty five) grade designed mix with slab including reinforcement and formwork complete as per drawing and technical :1.5:3) (one cement : one point five sand : three graded/crushed stone aggregate) 3200mm (Twenty millimeters) nominal size specifications sections 800,1400 and clause1404.4 including carriage of materials within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated plain cement concrete Grade M-10 (ten) in foundation including form works in any height complete as per drawing and technical specifications and curing complete within all leads, lifts carriage of material and other incidentals as per MoRTH Section clause 1500, 1700 and 2200.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-30 (thirty) in sub structure including form works but excluding reinforcement in any height complete as per drawing and technical specifications and curing complete as per MoRTH Section 1500, 1700 and 2200.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Supplying, fitting and placing HYSD bar reinforcement made of TATA SAIL, TISCO in sub-structure complete as per drawing and technical specifications including carriage of material within all leads, lifts and other incidentals as per MoRTH Section 1600 and 2200.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Back filling with granular material behind abutment wing wall and return wall complete as per Drawing and technical specification as per MoRTH clause 1206.3.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications section 2000, 1000 and 2200.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83 (Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications section 2000, 1000 and 2200. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing weep hole in brick masonry/ plain/ reinforced concrete abutment , wing wall, return wall with 100mm (one hundred millimeters) dia. PVC pipe, extending through the full width of the structures with slope of 1V:20H (one vertical : twenty horizontal ) towards draining face complete as per drawing and technical specifications and carriage of material within all leads, lifts/depths and other incidentals as per MoRTH clause 2706 Section 2200.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification clause 710.1.4 of IRC :78 and 2504.2. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-30 (thirty) in kerb including form works but excluding reinforcement in any height complete as per drawing and technical specifications as per MoRTH Section 1500, 1700 and 2200.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Supplying, fitting and placing HYSD bar reinforcement made of TATA SAIL, TISCO in super structure complete as per drawing and technical specifications as per MoRTH Section 1600 and 2300.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Construction of RCC railing of M30 (thirty) grade in-situ with 20 mm (twenty millimeter) nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimeter), leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications as per MoRTH clause 2703 and section 1600, 1500 and 1700.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and fixing 1.8m (one point eight) meters high GI barbed wire fencing with 2.4 m(two point four meter) angle iron posts 50 mm x 50 mm x 6 mm placed every 3m (three meters) center to center founded in M15 )fifteen) grade cement concrete, 0.6m (zero point six meters) below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12(twelve) horizontal lines and 2(two) diagonals inter woven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 808. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing drainage Spouts complete as per drawing and Technical specifications as per MoRTH clause 2705. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying reinforced cement concrete grade M-30 (thirty) in approach slab including reinforcement and formwork complete as per drawing and Technical specifications as per MoRTH Section 1500, 1600, 1700 and clause 2704.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, (seventy milimeter) complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation complete as per MoRTH clause 2607. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated cement concrete wearing coat M-30 (thirty) grade including reinforcement and form work complete as per drawing and Technical Specifications as per MoRTH clause 2702. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and fixing 20mm (twenty millimeter) thick compressible Fiber Board in expansion joint complete as per drawing and Technical specifications between abutment and return including carriage of material within all leads, lifts and other incidentals as per MoRTH clause 2604.The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying (P.C.C.) M 15 (Fifteen) ordinary grade (1:2.5:5) (one cement : two point five sand : five graded/crushed stone aggregate) leveling course below approach slab complete as per drawing and technical specifications section 800 and 1400 and clause 1404.4 including carriage of materials within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Earth work in excavation for structures i.e. in foundation and tranches etc. as per drawing and MORD technical specification section 300 & clause 305 in all kinds soil such as pick, jumper blasting work or chiseling any other intermediate classification of soil in dry or saturated condition in all leads and lifts including timbering or tranches shoring, bracing and strutting, dewatering, pumping or balling out of water caused by rains streams sub-soil water, canal or river seepage etc. as may be necessary, stacking the excavated serviceable and unserviceable material separately as directed by the Engineer-in-Charge and then returning the stacking soil in fifteen centimeter layers when required into plinth and sides of foundation etc., consolidation of each deposited layer by ramming, watering and then disposing of all surplus unserviceable material as per the direction of the Engineer-in-Charge with in all leads and lifts disposed material to be leveled and neatly dressed complete including carriage of material with in all leads and lifts and other incidentals. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated concrete for plain / reinforced concrete in open foundations complete as per drawing and technical specification section 800,1200 and clauses 802, 803, 1202 & 1203, Plain cement concrete nominal mix 1:5:10 (one cement : five sand : ten graded/crushed stone aggregate 40mm (forty millimeter) nominal size) including cost of form work and curing complete within all leads, lifts carriage of material and other incidentals, as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Back filling with granular material behind abutment wing wall and return wall complete as per Drawing and MORD technical specification clause1206.3 and 1604.7 complete with in leads, lifts carriage of materials other incidentals complete in all respect and carriage of material within all leads, lifts/depths and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing weep hole in brick masonry/ plain/ reinforced concrete abutment, wing wall, return wall with 100mm die (hundred millimeter diameter). PVC pipe, extending through the full width of the structures with slope of 1V:20H (one vertical into twenty horizontal) towards drawing face complete as per drawing and MORD technical specifications section 600,700, 1200 & clauses 614, 709, 1206.6 complete with in leads, lifts carriage of materials other incidentals complete in all respect and carriage of material and other incidentals compete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Compacting original ground supporting sub grade: Loosening of the ground up to a level of 300 mm (Three hundred millimeter) below the sub-grade level, watered, graded and compacted in layers to meet requirement of sub grade construction as per MORD Technical Specification section 300 & Clause 303 including carriage of material with-in all leads, lift and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement with all lead as per MORD Technical Specification section 300 & Clause 303.1.as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MORD Technical Specification Clause 401 complete including carriage of material with-in all leads, lift and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug Mill) carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub base and compacting with smooth wheel roller 80 to 100kn (eighty to hundred kilo Newton) weight to achieve the desired
density including lighting, barricading and maintenance of diversion, etcetera as per table 400.11 & 400.12 and technical specification Clause 406 complete within all leads, lifts carriage of material and other incidentals, as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying at the rate of 0.85 kg/sqm (zero point Eighty five kilograms per square meter) using mechanical means as per MORD technical specification clause 502 including carriage of material with in all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg/sqm (zero point two seventy five kilograms per square meter) on the prepared granular surfaces treated with primer coat cleaned with hydraulic broom as per MORD technical specification clause 503 including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and Laying bituminous concrete 30mm ( thirty millimetre) compacted thickness with bitumen of grade VG-10 (ten) @ 5.50% (at the rate of five point five zero per cent) (percentage by weight of total mix) and lime filler @ 2% (two percentage) (percentage by weight of aggregate) prepared in Batch Type Hot Mix Plant of 40-60 TPH (Forty- Sixty tonne per hour) batch type HMP producing an average output of .50 (fifty) tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete in all respect including haulage of material in all leads and lifts by all modes of transportation and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed vibrated plan cement concrete mix 1:3:6 (one cement: three sand: six graded, crushed stone aggregate 40mm (Forty millimetre) normal size) of mixed design to have characteristic strength of grade M-10 (Ten) in foundation and plinth curing complete including cost of form work as per drawing and MORD technical specifications section 800, 1200 & clause 802, 803, 1202 and 1203 including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed vibrated plan cement concrete mix 1:2.5:5 (one cement: Two point Five sand: Five graded stone aggregate 40mm (Forty millimetre) normal size) of mixed design to have characteristic strength of grade M-15 (fifteen) in substructure complete including cost of form work as per drawing and MORD technical specifications section 800,1200 & clause 802, 803, 1202 and 1206 including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Bedding for Pipe Laying Type A (concrete cradle) bedding with M15 (Fifteen) Grade Cement Concrete as per Clause 1101.5 (i) Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MORD technical specifications section 800, 1200 Clause 802, 803, 1202 & 1203 including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying of dry rubble flooring complete as per drawings and MORD technical specifications Clause 1303.3 including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying reinforced cement concrete 900mm diameter (Nine hundred millimetre) pipe NP3 as per design for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement : two sand) but excluding excavations, protection works, back filling, concrete and masonry works in head walls and parapets as per drawings and technical specifications section 100 & Clause 1101 including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying filter media with granular crushed aggregate as per specification to a thickness of not less than 600mm (Six hundred millimetres) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawings and MORD technical specifications Clause 1206.3 complete within all leads, lifts carriage of materials and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated plain cement concrete mix with 1:2:4 (One Cement: Two Sand: Four graded stone aggregate 40mm (Forty millimeter) normal size) of mixed design to have characteristic strength of grade M-20 (Twenty) in substructure complete including cost of form work as per drawing and MORD technical specifications section 800, 1200 & clause 802, 803, 1202 and 1206 including carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated reinforced cement concrete graded M-20 (twenty) design mix with 1:2:4 (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) including form work and curing complete but excluding the cost of steel reinforcement and binding wire as per drawing and technical specifications section 800, 1200 & clause 802, 804,805,806,807,1202 and 1204 including carriage of material within all leads, lifts or as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying mechanically mixed and vibrated reinforced cement concrete graded M-25 (twenty five) design mix with 1:1.5:3 (One Cement: one point five Sand: Three graded crushed stone aggregate 20mm (twenty millimeter) nominal size) including form work and curing complete in superstructure but excluding the cost of steel reinforcement and binding wire as per drawing and technical specifications section 800, 1400 & clause 800 and 1401 including carriage of material within all leads, lifts or as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, s
ale tax or other taxes imposed by the government, but excluding GST.
Providing and laying cement concrete wearing course M 30 (thirty) grade including reinforcement and form work complete as per drawing and specifications section 800,1400 and clause 1404.2 including carriage of materials in all leads, lifts or as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Supplying, fitting and placing HYSD bar reinforcement made TATA SAIL,TISCO in substructure complete as per drawings and technical specification Clauses 1001, and 1206 including carriage of materials within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Supplying, fitting and placing HYSD bar reinforcement made TATA SAIL,TISCO in superstructure complete as per drawings and technical specification Clauses 1001, and 1401 including carriage of materials within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Drainage spouts complete as per drawing and technical specifications Clause 1404.5 including carriage of materials within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
Providing and laying flooring with rubble stone laid in cement mortar 1:3 (one cement: three sand) laid over cement concrete bedding (cement concrete bedding to be measured and paid for separately) curing complete as per drawing and technical specification Clause 1303. including carriage of materials within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the government, but excluding GST.
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.17 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_177154.xls
BOQ • 0.33 MB
SBD.pdf
Tender Documents • 5.78 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .