CPPP

Active

Works

Electrical Works

Maintenance of office Complex Under Project Zone-II

Delhi Development Authority

NARELA | North Delhi, Delhi

Amount: ₹11.1 LCloses: 14 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes14 Oct 2026
Bid Opening15 Oct 2026

Tender Value

₹11.1 L

EMD Value

₹22,265

Closing Date

14 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

EE,ELD-7,DDA

Address

EE,ELD-7,DDA

Work Description

Replacement of existing compound lighting inside DDA Office Complex near MunimjikaBagh

Tender Information

Tender ID

2026_DDA_928776_1

Reference Number

05/EE(E)ELD-7/DDA/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

90 days

Location

NARELA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

Required(i) Evidence of EMD Deposited through IFMIS Portal as per Annexure -III. (.pdf)

Required(ii) Proof of payment made for e-tendering processing fee charges to CRB, DDA as detailed in Para No (.pdf)

Required(iii) GST Registration Certificate, if already obtained by the bidder (with up to date return filed) (.pdf)

Required(iv) Valid Enlistment order for DDA enlisted contractors. (.pdf)

Required(v) Valid Electrical license. (.pdf)

Required(vi) An undertaking that bidder has not been blacklisted from tendering process by any Govt. organiz (.pdf)

Required(vii) Tender acceptance letter, as per attached format on agencys letter head. (.pdf)

Required(viii) EPFO and ESI Registration Certificate with challan copy paid to labors in last two quarters (.pdf)

Required(ix) List of T and P as mentioned in Schedule F. (.pdf)

Required(x) Corrigendum to tender uploaded before opening of tender (if any). (.pdf)

Required(xi) Any other documents as specified in the press notice. (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹22,265

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

15 Oct 2026

Download Starts

7 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Supply of 6 Mtrs internally and externally Hot dip galvanised Octagonal pole made up of 3 mm thick HT Steel sheet Conforming to grade S355JO , E 350. The pole shaft shall be continuously tapered one section with single longitudinal welding . Top A/F of the pole shaft is 70 mm and bottom A/F is 130 mm. Base plate of 200 mm. X 200 mm. X 12mm ( thk ) shall be welded (inside & outside) with pole shaft . With accessories are included in supply for fixing of pole with foundation using 4 nos. existing holes on base plate . Poles shall be supplied with weather proof & vandal resistant ant inbuilt flash door including locking arrangement with Allen key. Arrangement shall be provided for fixing circuit board with cable termination facility and MCB . i) 500 mm Long single arm bracket made out of 48mm dia pipe with sinbgle arm canopy of 300mm ii) 6 mm thick phenolic laminated/Bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. Iii) 1 no. 63 amp terminal block suitable for following conductor / cable fixed on DIN channels i/c providing and fixing DIN channel of suitable length on the existing phenolic laminated / Bakelite sheet. iv) 16 sq mm. conductor – 4 nos. (incoming and outgoing looping) v) Terminal suitable for 6 SWG GI Wire / 2.5 sqmm wire. vi) 6 amp SPMCB, 10 kA ‘C’ Series – 1 no. including mounting on DIN channel, earth stud – 1 nos. welded at suitable height i/c washers, spring washers & nuts etc. vii) Suitable arrangement of saddling of incoming / outgoing cables. viii) Connector box GI cover with two hinges and locking arrangement with round sleeve welded around connector box cover.	20	Each	12,088	₹2,41,760
2Foundation for 06 mtr Pole
2.01	Providing and laying in position M 25 reinforced cement concrete foundation of size 500mm x 500mm and 1400mm deep i/c excavation of earth providing cutting, bending and placing in position reinforcement of cold twisted bars of 12mm dia – 1300 mm (approx) atleast 8 Nos (vertical) & reinforcement ring of cold twisted bar of 8 mm dia –1800 mm (approx)– atleast 8 Nos. (at 150 mm approx. spacing) i/c supply of 4 Nos M-20 X 600 mm long (150 mm top threaded & 150 mm bottom J-galvanized portion) G.I. foundation bolt (EN 8-grade) with 3 nos. nuts & 2 nos. washers, bolts along with 2 Nos. Template / anchor plate of size 200 mm x 200 mm x 4 mm thick having 4 Nos. 22 mm dia holes to match PCD of 200mm	20	each	7,764	₹1,55,280
3Supplying of following sizes of XLPE aluminum conductor armoured power cable of 1.1 KV grade i/c connection & testing etc. as required and as per technical specification enclosed.
3.01	4 Core x 10 Sq.mm	650	Meter	359	₹2,33,350
4Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
4.01	3 C x 1.5 Sq.mm	120	Meter	104	₹12,480
5LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3 2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) for
5.01	90 Watt LED.	20	Each	2,820	₹56,400
6	Supplying, installation, testing & commissioning of floor mounted free standing type L.T. cubical Service Feeder Pillar compartmented (outdoor type) made out of 2mm thick MS CRCA sheet with 4 nos. x 600 mm long legs made of M.S angle iron of size 40 mm x 40 mm x 5 mm thick along with frame & legs suitably grouted in foundation i/c connection, inter connection of the accessories mounted there on with suitable size of copper wire/strip with thimbles/lugs, earthing the body of the feeder pillar i/c supplying & fixing of the following items and as per technical specification enclosed. a)63A_36K_FP MCCB Thermal Magnetic Release- Qty 1 b)63A FP POWER CONTACTOR- Qty 1 c)32 A TP MCCB- Qty 1 d)ADDON BLOCK- Qty 1 e)R, Y , B PHASE INDICATION LAMP_240VAC- Qty 1 f)6A SP MCB C-CURVE- Qty 3 g)DIGITAL AMMETER- Qty 1 h)ASS- Qty 1 i)DIGITAL VOLTMETER- Qty 1 j)VSS- Qty 1 k)CT- 60/5A CL-1 15VA- Qty 3 l)ASTRONOMICAL TIMER_Astro Mini- Qty 1 m)A/M TOGGLE SWITCH- Qty 1 n)O/G MCBs- Qty 4 o)32A DP MCB_C CURVE- Qty 5	1	Each	93,437	₹93,437

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.24 MB

Work Item Documents

NIT05.pdf

Tender Documents • 2.81 MB

BOQ_976041.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Supply of 6 Mtrs internally and externally Hot dip galvanised Octagonal pole made up of 3 mm thick HT Steel sheet Conforming to grade S355JO , E 350. The pole shaft shall be continuously tapered one section with single longitudinal welding . Top A/F of the pole shaft is 70 mm and bottom A/F is 130 mm. Base plate of 200 mm. X 200 mm. X 12mm ( thk ) shall be welded (inside & outside) with pole shaft . With accessories are included in supply for fixing of pole with foundation using 4 nos. existing holes on base plate . Poles shall be supplied with weather proof & vandal resistant ant inbuilt flash door including locking arrangement with Allen key. Arrangement shall be provided for fixing circuit board with cable termination facility and MCB . i) 500 mm Long single arm bracket made out of 48mm dia pipe with sinbgle arm canopy of 300mm ii) 6 mm thick phenolic laminated/Bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. Iii) 1 no. 63 amp terminal block suitable for following conductor / cable fixed on DIN channels i/c providing and fixing DIN channel of suitable length on the existing phenolic laminated / Bakelite sheet. iv) 16 sq mm. conductor – 4 nos. (incoming and outgoing looping) v) Terminal suitable for 6 SWG GI Wire / 2.5 sqmm wire. vi) 6 amp SPMCB, 10 kA ‘C’ Series – 1 no. including mounting on DIN channel, earth stud – 1 nos. welded at suitable height i/c washers, spring washers & nuts etc. vii) Suitable arrangement of saddling of incoming / outgoing cables. viii) Connector box GI cover with two hinges and locking arrangement with round sleeve welded around connector box cover.

Each

12,088

₹2,41,760

2Foundation for 06 mtr Pole

2.01

Providing and laying in position M 25 reinforced cement concrete foundation of size 500mm x 500mm and 1400mm deep i/c excavation of earth providing cutting, bending and placing in position reinforcement of cold twisted bars of 12mm dia – 1300 mm (approx) atleast 8 Nos (vertical) & reinforcement ring of cold twisted bar of 8 mm dia –1800 mm (approx)– atleast 8 Nos. (at 150 mm approx. spacing) i/c supply of 4 Nos M-20 X 600 mm long (150 mm top threaded & 150 mm bottom J-galvanized portion) G.I. foundation bolt (EN 8-grade) with 3 nos. nuts & 2 nos. washers, bolts along with 2 Nos. Template / anchor plate of size 200 mm x 200 mm x 4 mm thick having 4 Nos. 22 mm dia holes to match PCD of 200mm

each

7,764

₹1,55,280

3Supplying of following sizes of XLPE aluminum conductor armoured power cable of 1.1 KV grade i/c connection & testing etc. as required and as per technical specification enclosed.

3.01

4 Core x 10 Sq.mm

650

Meter

359

₹2,33,350

4Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

4.01

3 C x 1.5 Sq.mm

120

Meter

104

₹12,480

5LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3 2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) for

5.01

90 Watt LED.

Each

2,820

₹56,400

Supplying, installation, testing & commissioning of floor mounted free standing type L.T. cubical Service Feeder Pillar compartmented (outdoor type) made out of 2mm thick MS CRCA sheet with 4 nos. x 600 mm long legs made of M.S angle iron of size 40 mm x 40 mm x 5 mm thick along with frame & legs suitably grouted in foundation i/c connection, inter connection of the accessories mounted there on with suitable size of copper wire/strip with thimbles/lugs, earthing the body of the feeder pillar i/c supplying & fixing of the following items and as per technical specification enclosed. a)63A_36K_FP MCCB Thermal Magnetic Release- Qty 1 b)63A FP POWER CONTACTOR- Qty 1 c)32 A TP MCCB- Qty 1 d)ADDON BLOCK- Qty 1 e)R, Y , B PHASE INDICATION LAMP_240VAC- Qty 1 f)6A SP MCB C-CURVE- Qty 3 g)DIGITAL AMMETER- Qty 1 h)ASS- Qty 1 i)DIGITAL VOLTMETER- Qty 1 j)VSS- Qty 1 k)CT- 60/5A CL-1 15VA- Qty 3 l)ASTRONOMICAL TIMER_Astro Mini- Qty 1 m)A/M TOGGLE SWITCH- Qty 1 n)O/G MCBs- Qty 4 o)32A DP MCB_C CURVE- Qty 5

Each

93,437

₹93,437