Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC | ₹7.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹7.2 L+₹7,187.30 (1.01%)Rejected-AOC | ₹7.2 L+₹7,187.30 (1.01%) | L2 | Rejected-AOC L2 |
| 3 | L3₹7.5 L+₹34,487.53 (4.85%)Rejected-AOC | ₹7.5 L+₹34,487.53 (4.85%) | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | SHEJI KT L3 | KMS Construction L2 | Labour co-operative society for local development and social welfare ltd R1264 Mattathur L1 |
|---|---|---|---|---|---|---|
| 1.00maintenance works | ||||||
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 558 | kilogram | 121.12 ₹67,584.96 | 116.69 ₹65,113.02 | 115.52 ₹64,460.16 Lowest |
| 1.00 | OD101663/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single desiredby Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape
wherever required. | 62 | sqm | 644.7 ₹39,971.4 | 621.1 ₹38,508.2 | 614.89 ₹38,123.18 Lowest |
| 1.00 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 0.38 | cum | 6,703.1 ₹2,573.99 | 6,457.71 ₹2,479.76 | 6,393.13 ₹2,454.96 Lowest |
| 1.00 | OD103791/2025-2026:Wall painting with plastic emulsion paint of approval brand and manufacture to give an even shade : one or more coats on old work (deleted item 14.54.1) | 1,778.87 | per sqm | 118.27 ₹2,10,386.36 | 113.94 ₹2,02,683.88 | 112.8 ₹2,00,655.97 Lowest |
| 1.00 | OD103792/2025-2026:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give even shade : one OR MORE COATS ON OLD WORK | 222.93 | sqm | 112.67 ₹25,117.52 | 108.55 ₹24,199.05 | 107.46 ₹23,956.06 Lowest |
| 1.01 | 50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall | 50 | metre | 295.09 ₹14,754.5 | 284.29 ₹14,214.5 | 281.45 ₹14,072.5 Lowest |
| 1.01 | 50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | 20 | metre | 258.12 ₹5,162.4 | 248.67 ₹4,973.4 | 246.18 ₹4,923.6 Lowest |
| 1.01 | 13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing | 84.12 | sqm | 415.69 ₹34,967.84 | 400.47 ₹33,687.54 | 396.47 ₹33,351.06 Lowest |
| 1.01 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 12.5 | kg | 796.96 ₹9,962 | 767.78 ₹9,597.25 | 760.1 ₹9,501.25 Lowest |
Tender Value
₹17,963
EMD Value
₹17,963
Closing Date
19 Mar 2026, 6:00 pmClosed
Assistant Engineer,LSGD SEction varandarappilly Gp
O/O Assistant Engineer ,LSGD Section varandarappilly GP Thrissur (dist)
Annual Plan-2025-26 Pr no 225/25 Improvement works to Panchayat flat building In Varandarappilly GP-General Civil Work
2026_LSGD_837767_2
TN9-01/2025-26/AELSGD/VPLY
Open Tender
Civil Works - Buildings
Item Rate
180 days
Varandarappilly Gp
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,585
Yes
₹17,963
Yes
27 Jun 2026
10 Mar 2026
23 Mar 2026
10 Mar 2026
19 Mar 2026
10 Mar 2026
maintenance works
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
OD101663/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single desiredby Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required.
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
OD103791/2025-2026:Wall painting with plastic emulsion paint of approval brand and manufacture to give an even shade : one or more coats on old work (deleted item 14.54.1)
OD103792/2025-2026:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give even shade : one OR MORE COATS ON OLD WORK
50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing
10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
OD101661/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm aggregate , filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Modified data of 16.68
OD101662/2025-2026:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete
OD104526/2025-2026:Supplying and fixing Ferrow cement READY MADE soak pit of size o60*60*60cm. including conveyance fixing etc. complete
51.18.12.7:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) External work - 65 mm nominal dia
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
OD427221/2025-2026:Engaging labour for cleaning
OD439471/2025-2026:Supplying and fixing M S name board having size not less than 75*60 cm including lettering ,labour for fixing ,carriage etc. complete
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1429112.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1429112.xls
BOQ • 0.31 MB
nit.pdf
Tender Documents • 0.03 MB
sbd.pdf
Tender Documents • 2.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .