REPAIR MAINTENANCE OF INTERNAL WIRING MCBs DBs SUB MAIN WIRING AND ELECTRICAL FITTINGS IN OFFRs JCOs OR MESS AT ALHILAL MIL STN

Amount

Taking down crefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross-sectional area, two single core, PVC insulated and unsheathed FRLS-H cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminious paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS-H cable as earth continuity conductor for one light point/fan point/bell point controlled by one switch & making good to distrubed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

All as per the description of serial item No 2 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed.

All as per the description of serial item No 2 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed.

All as per the description of serial item No 2 here-in-before but for one 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

All as per the description of serial item No 2 here-in-before but one two way point controlled by 2 way switch 5 amps.

M&L point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross-sectional area, two single core, PVC insulated and unsheathed FRLS-H cable 1100 volts grade, ISI-694 marked with valid CML No. in and including concealed PVC rigid conduit not less than 20mm wide, ISI marked with accessories fixed wall/roof/floor etc with mild steel/pressed steel sunken box duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminious paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS-H cable as earth continuity conductor for one light point/fan point/bell point controlled by one switch & making good to distrubed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

All as per the description of serial item No 7 here-in-before but for 5/6 amps socket outlet on same board.

All as per the description of serial item No 7 here-in-before but but for 5/6 amps socket outlet on independent board.

All as per the description of serial item No 7 here-in-before but for 16 Amps socket point on independent board with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor with 2.5 Sqmm PVC insulated FRLS-H multi-stranded copper conductor as earth wire & making good to disturbed surfaces as well as matching with existing whitewash colour/surface complete all as specified and directed.

All as per the description of serial item No 7 here-in-before but one two way point controlled by 2 way switch 5 amps.

S&F switch piano flush type 5 amps single pole one way complete all as specified and directed.

S&F switch piano 6 amps flush type single pole two way complete all as specified and directed.

S&F socket outlet 2-in1, 3 pin 6 amp flush type complete all as specified and directed.

S&F socket outlets 16 Amp, 3 pin flush type complete all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ding dong bell musical type AC 230 volt single pole complete all as specified and directed.

S&F bell push flush type 5A switch complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet suitable for 240 volts AC 100 watt etc as required complete all as specified and directed.

S&F LED bulb 9 watt complete all as specified and directed.

S&F LED light fitting mirror type with high output 5 watt 230 V AC LED batten including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:- Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved. Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LED tube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved

S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head fitting LED luminaire comprising of high brightness LEDs 10 watt, IP66 protection class complete all as specified and directed. Make Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPC/ Bajaj Cat Part No. BIBWP 10W LED WH/Philips Cat Part No. WT202WLED 10S

S&F LED light fitting 1 x 36/33 Watt, 2ft x 2ft ceiling surface type environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed. Note: Contractor is responsible for making necessary arrangements such as Scaffolding of suitable size for fixing of ceiling lights at different height and location at site. The rate for making arrangement of Scaffolding and manpower required for the above work is deemed to be included in the quoted rate. Make: Havells Cat Part No. PLANO2x2PLR36WLED840S/Bajaj Cat part No. BZRSQL 36W LED GX WH/Philips Cat part No. RC375B LED 865/840 PSU W60L60 52WH

S&F Sheet metal enclousers, TPN distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F of SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F of SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F of 415V 10KA 'B' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS-H, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS-H, cable drawn through non metallic rigid PVC conduit not less than 20mm dia ISI marked including all conduit and fixing accessories complete. Two runs of cable for phase/neutral, one run of cable for earth and one run PVC conduit will be measured and paid as one unit length complete all as specified and directed. Note: Wiring shall be done in proper colour coding.

M&L sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS-H, cable of 2 run 4 Sq mm for phase and neutral and one run of 4.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS-H, cable drawn through non metallic rigid PVC conduit not less than 20mm dia ISI marked including all conduit and fixing accessories complete. Two runs of cable for phase/neutral, one run of cable for earth and one run PVC conduit will be measured and paid as one unit length complete all as specified and directed. Note: Wiring shall be done in proper colour coding.

Taking down sub main wiring of any size from the wall/roof/ceiling and remiving from the site and making good distrubed surface complete all as specified and directed.

Taking down main switches, distribution board, sheet enclosure with MCB's any way and rating including wooden board or from steel board and making good distubed surface complete all as specified and directed.

S&F in repairs switch piano flush type 6 amps single pole one way complete all as specified and directed.

S&F in repairs socket outlet 2-in1, 3 pin 6 amp flush type complete all as specified and directed.

S&F in repairs bell push flush type 5A switch complete all as specified and directed.

S&F in repairs switch piano flush type 16 amps single pole one way complete all as specified and directed.

S&F in repairs switch socket combination 2 in 1, 5/3 pin, 6 and 16 A flush type universal, ISI marked complete all as specified and directed.

S&F in repairs socket outlets 6 and 16 amps, 2 in 1, 5 pin flursh type complete all as specified and directed.

S&F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as requiredc complete all as specified and directed.

S&F in repairs ding dong bell type AC, 230 volts, singel pole complete all as specified and directed.

S&F in repairs capacitor 2.50 Mfd, 240V, complete al as specified and directed.

S&F in repairs MCB SPN 'C' curve, 10 KA 32 amps complete all as specified and directed.

S&F in repairs MCB SP 'B' curve, 10 KA 6 to 32 amps complete all as specified and directed.

S&F in repairs MCB TPN 'B' curve, 10 KA, 415 V, 63 amps in MCB DB including necessary connection complete all as specified and directed.

S&F in replacement of PVC non metallic conduit of 25mm size with accessories including dismantling/taking down of old unsv/broken PVC conduit/casing caping fixed on surface/ concealed including making good the disturbed surface complete all as specified and directed.

S&F in repairs environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head fitting LED luminaire comprising of high brightness LEDs 10 watt, IP66 protection class complete all as specified and directed. Make Havells Cat Part No. RUGBYGENXFTS10WLED865SSYMBOPC/ Bajaj Cat Part No. BIBWP 10W LED WH/Philips Cat Part No. WT202WLED 10S

S&F in repairs surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:- Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved. Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LED tube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved

S&F in repairs surface mounting 2 ft length, 5 watt LED batten with light fitting complete all as specified and directed.

S&F in repairs 4ft length ultra bright 20W LED polycarbonate tuberod with THD<10% with very high efficacy suitable for installation in existing T8 fitting with G13 lamp holders (single side connection) complete all as specified and directed.

S&F in repairs LED light fitting 1 x 36/33 Watt, 2ft x 2ft ceiling surface type environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed. Note: Contractor is responsible for making necessary arrangements such as Scaffolding of suitable size for fixing of ceiling lights at different height and location at site. The rate for making arrangement of Scaffolding and manpower required for the above work is deemed to be included in the quoted rate. Make: Havells Cat Part No. PLANO2x2PLR36WLED840S/Bajaj Cat part No. BZRSQL 36W LED GX WH/Philips Cat part No. RC375B LED 865/840 PSU W60L60 52WH

S&F in repairs decorative wall light fixture made up of polycarbonate suitable for 9 watt retrofit LED lamp B 22 Base including electric connection with using 2 core flexible copper conductor dable 23/0.00076 from ceiling rose to light fitting, complete fitting and accessories all as specified and directed.

S&F motor of exhaust fan (plastic body) capacity 200mm as in repair including taking down of old unsv motor complete all as specified and directed.

S&F motor of exhaust fan (plastic body) capacity 250mm as in repair including taking down of old unsv motor complete all as specified and directed.

S&F in repairs electronic meters temper proof LDC display with polycarbonate cover single phase 230V, 10-60A accuracy class-1 50 Hz, conforming to IS 13779 IP-54 with parameters to show data, time, current reading, load, PF, voltage & KWH complete all as specified and directed.

Note for Srl item No. 39 to 60:- 1. The contractor has to maintain a separate complaint slip book and complaint register for attending the day to day complants pertain to internal electrication. 2. The contractor/rep have to collect daily complants from E&M complaints celld Alhilal Mil Stn and get them signed from user after completing the job and submit to E/M complant cell. 3. The contractor has to complete the work assigned for above items within 36 hours failing in which recovery at the rate Rs. 25.00 per day per complaint. 4. The contractor will ensure deployed of sufficient manpower with equipped all sort of petty items such as insulation tape, galvanized screws, nuts, bolts, washers etc. required for accomplish the job

M&L 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 06 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site complete all as specified and directed.

M&L 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 10 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion.

Note:-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item. (iv) The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item.

M/s Sheetal Associates