Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC ESD NO II UHL STAGE III BVPCL CHULLAH | LANGNA | MANDYA | KARNATAKA | 571401 | ₹1.9 L | L1 | Accepted-AOC Award |
| 2 | L2₹1.9 LRejected-Finance NO 1 HPPWD DIVISION DHARAMSHALA HIMACHAL PRADESH | ₹1.9 L | L2 | Rejected-Finance Lowest 2 |
| 3 | L3₹2.0 LRejected-Finance | ₹2.0 L | L3 | Rejected-Finance Lowest 3 |
| 4 | L4₹2.2 LRejected-Finance | ₹2.2 L | L4 | Rejected-Finance Lowest 4 |
| 5 | L5₹2.3 LRejected-Finance | ₹2.3 L | L5 | Rejected-Finance Lowest 5 |
Tender Value
₹2.7 L
EMD Value
₹5,500
Closing Date
10 Apr 2026, 10:00 amClosed
Executive Engineer
EE HP PWD Division Tanda at Nagrota Bagwan
Repair of Type-III Qtrs. in S/R Colony Qtr. No. 5 at Dr R.P. Govt. Medical College Kangra at Tanda in Distt Kangra (HP) (Deposit work) (SH-Providing and fixing aluminium work paint work WS and SI etc)
2026_PWD_133207_2
Nagrota 04.04.2026
Open Tender
Civil Works - Buildings
60 days
Nagrota Bagwan
Please refer Tender documents.
11 documents required · 11 mandatory
₹350
₹5,500
15 Jun 2026
4 Apr 2026
10 Apr 2026
4 Apr 2026
10 Apr 2026
4 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Kilogram | - | - | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area beyond 3 sq. metres complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Kilogram | - | - | Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall Including disposal of rubbish to the dumping ground within a Lead of 20 metres with:- Cement Mortar 1:6 (1 Cement : 6 Sand) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 3 | Providing and fixing 6 mm thick ACP Sheet in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and fining 5.5 mm thickglass panes with putty and glazing clips in steel doors, windows, clerestory windows complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and fixing Stainless steel Road for pelmet grade 304, curtain rod 25 mm dia 1.20mm thick complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 5 | Providing & fixing 5.5 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 6 | Providing and fixing 100 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Each | - | - | Providing and fixing aluminium work for doors, windows, ventilators and partitions frame with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 7 | Repair to Plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and fixing 250x10mm size aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 9 | Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and fixing 100 mm aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 10 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. | - | Per Square metre | - | - | Providing and fixing 300x16mm anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Sbd.pdf
Tender Documents • 7.13 MB
BOQ_197006.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid