Improvement of water facilities to Village Kushmal in Tehsil Palampur Distt Kangra H P

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre) layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (One cement is to four sand is to eight graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-charge.

a) Edges of slab and breaks in floor and walls under 20 centimetre in wide within all leads and lifts as per the direction Engineer-in-charge.

b) Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like within all leads and lifts as per the direction of Engineer-in-charge.

c) Beams, cantilever, girder and linter sides and soffits of beams haunchings cantilevers girder, bressumers and lintel not exceeding one meter in depth in all heights from floor within all leads and lifts as per the direction of Engineer-in-charge.

a) Arches exceeding six metre span within all leads and lifts as per the direction Engineer-in-charge.

a) Foundation,footings bases of column and the like mass concrete within all leads and lifts as per the direction of Engineer-in-charge.

b) Walls (any thickness) butt not less then 0.10 metre thickness) attached pillasters, buttresses, plinth and string courses etc. from top of foundation up to floor two level with in all leads and lifts as per the direction of Engineer-in-charge.

c) Suspended floors,roofs landing shelves and their supports balconies beams,girders and cantilevers upto floor two level within all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying mild steel/tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in-charge.

Manufacturing, fabrication & fixing of mild steel man hole cover of 0.60x.60 metre size made of mild steel Sheet 2.0 mm thick with mild steel angle 35x35x5mm thick with hinges one side and sliding door bolt for locking arrangement including cutting, welding and priming and Painting two coats of anamel paint skycomplete in all respect to the entire satisfaction of the Engineer-in-charge.

a) 80 milimetre dia.

a) 80 milimetre dia.

Steel work welded in built up sections,trusses and framed work including cutting,hoisting and fixing in position and applying a priming coat of red lead paint in gratings,framed guard bars,ladders,railing,brackets and similar type of work within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing double flanged puddle collars for making connection with reinforcement cement concrete walls of 80 milimetre dia within all leads and lifts as per the direction of Engineer-in-charge.

Manufacturing, fabrication & fixing of mosquito proof ventilation 800 mm height and 300 mm dia cover with dome roofing of M.S. sheet 2 mm thick, G.I mesh along circumfrences and suported on 0.25x5 mm thick including cutting, welding and priming & painting two coats of anamel paint sky bluecomplete in all respect to the entire satisfaction of the Engineer-in-charge.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surface (one coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials within all leads and lifts as per the direction of Engineer-in-charge.