Loading…
Loading…
Tender Value
₹3.0 Cr
EMD Value
₹6.0 L
Closing Date
25 Sept 2026, 3:00 pm
Project Manager
BRIDCUL Office, Rautela Colony, Mukhani Haldwani
CONSTRUCTION OF REMAINING WORKS OF ACADEMIC BLOCK -II AT DR. A.P.J. ABDUL KALAM INSTITUTE OF TECHNOLOGY, TANAKPUR, DISTT.- CHAMPAWAT
2026_BRID3_100021_1
BRIDCUL/HLD/04/2026-27
Open Tender
Civil Works
Item Rate
180 days
Tanakpur
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,900
Project Manager
₹6.0 L
BRIDCUL Office, Rautela Colony, Mukhani Haldwani
11 Sept 2026
11 Sept 2026
25 Sept 2026
11 Sept 2026
25 Sept 2026
18 Sept 2026
18 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified mininum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum | 251.98 | Cum | - | - |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 52,312.71 | Kg | - | - |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform | 1,141 | Sqm | - | - |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers | 551.86 | Sqm | - | - |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts | 274.08 | Sqm | - | - |
| 6 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) | 11.87 | Cum | - | - |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement: 6 coarse sand) | 170.62 | Cum | - | - |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level..Cement mortar 1:4 (1 cement :4 coarse sand) | 526.44 | Sqm | - | - |
| 9 | Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). | 529.34 | Sqm | - | - |
| 10 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) | 1,652.77 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
APJSBD.pdf
Tender Documents • 9.97 MB
BOQ_117939.xls
BOQ • 1.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .