Repairing and Renovation of Children Home for Boys at Vyara, Tal.: Vyara, Dist.: Tapi

Repairing and Renovation of Children Home for Boys at Vyara, Tal.: Vyara, Dist.: Tapi.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Dismentaling tiled of stone floors laid in mortar including 952.62 Sq.m. 49.41

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

2 Providing and laying integral cement based water proofing 980.00 Sq.m. 906.98

treatment including preparation of surface as required for treatment

of roofs, balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment. (b) Laying cement concrete

using broken bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645, brick

bats is finally covered by jointless cement plaster 20mm th. in

C.M. 1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about

300 mm in a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (c) The whole terrace so finished shall be

flooded with water for a minimum period of two weeks for curing

and for final test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.) NOTE :- (1) The whole

work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors

& conducting water proof test as directed. Unit Rate of 1 Sq.Mt..

3 Theme Based Wall painting with plastic emulsion paint of 685.00 Sq.m. 909.00

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth. Item to be approved by engineer

incharge or consulting engineer

4 Writing letter or figures on any surface with black japan paint 5000.00 Per 3.67

(stops,comas, hyphens and the like not to be measured and Letter

paid for separately) (ii) Indian (Letters/Figures) per

Size,Style,colour etc of Fonts required as per engineer in cm/Ht.

Item Description of Item Quantity Unit Rate In Amount

5 Crack Repairs:-Crack filling using fiber reinforced polymer 80.00 Rmt. 202.00

modified mortar after openning crack in "V" grove, Making

Surface dust free, with a bond coat of polymer as per the data

sheet for crack repairing cracks less than 10mm

6 Providing laying and jointing in true line and level 50mm dia. 30.00 Rmt. 195.67

C.P.V.C. Pipe ( SCH- 40) for Hot water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed ncluding necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

7 Providing laying and jointing in true line and level 40mm dia. 30.00 Rmt. 148.12

C.P.V.C. Pipe ( SCH- 40) for Hot water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

8 Providing and fixing ball cock of approved. quality as 5.00 No. 189.84

directed.(A) Copper Metal (ii) 40/50mm dia.

9 Providing, laying and jointing in true line and level 110 175.60 Rmt. 857.65

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length

x 145 mm heigh at every 2000 mm center to center or shall

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

10 Providing and laying white glazed tiles 6mm thick in skrting 18.00 Sq.m. 922.88

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

Item Description of Item Quantity Unit Rate In Amount

11 Finishing wall with water proofing cement paint of on wall 3001.70 Sq.m. 58.87

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and

remains of loose powered materials.

12 Applying two coats of putty & two coats of primer of 1118.00 Sq.m. 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

13 Wall painting (two coats) with plastic emulsion paint of 1118.00 Sq.m. 81.38

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

14 Steel work, welded in built up sections framed work 765.25 Kg. 92.09

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint & two coat oil paint. (A)In

beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the like..

15 Providing and fixing of Ridge flashing for roof panel shall be 55.61 Sq.m. 867.39

made out of 0.5 mm thick pre coated GI sheet . The

Precoated sheet shall be of minimum 240 mpa steel grade

confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members

by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc

16 Providing and laying antiskid ceramic tiles 30 x 30 cm size 6 7.06 Sq.m. 929.39

mm thick in flooring treads of steps and landing laid on a bed

of 12 mm thick cement mortar 1:3(1-cement:3-coarse

sand)finishing with flush pointing in white cement

Item Description of Item Quantity Unit Rate In Amount

17 Providing and laying glazed tiles tiles size 30 x 45 cm 6 mm 15.41 Sq.m. 1477.25

thick in skirting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry

18 Providing and fixing 0.75 meter wide sand which type 1.35 Sq.m. 5101.51

counter platform including supplying and fixing granite

stone of Z black or equivalant quality 18 mm thick mirror

polished on top and side posiition and vertical strip at front

with cement slurry & adhesive including moulding of both

exposed edges over 25 mm thick kotah stone platform

fixing in top and sides and itermediates supports fixing with

cement mortar and adhesive and finishing all material and

labour and assessories and 2 no flat back wash with

necessary fitting MI Fisher , Waste pipe and coupling ,

mm pillar cock etc. complete etc.

19 Providing laying and jointing in true line and level 25mm dia. 15.00 Rmt. 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

20 Providing laying and jointing in true line and level 15mm dia. 8.00 Rmt. 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

21 Providing and fixing PVC SWR Nahni trap IS 14735 for 2.00 No. 585.37

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

22 Providing and fixing screw down bib taps of following 4.00 No. 214.81

size.(A) Brass screw down bib tap polished bright. (i) 20mm

Item Description of Item Quantity Unit Rate In Amount

23 Providing & Fixing in position standard extruded approved 1.50 Sq.m. 2724.07

colour anodised Aluminum Ventilation with outer frame 65 x

25 x 1.50 mm Stander Box Frame @ Wt 0.833 kg/Rmt with

5mm thick fixed ground glass and Mosquito net jali fixed to

alluminium strip blade fixed or adjestable ventilation

including all required materials, fixtures, fastenning, labours

and equipments as per detailed drawing as directed. For

24 Providing and fixing wash down water closet (European type 1.00 No. 3035.05

W C pan) with integral P and S trap including jointing the

trap with soil pipe in cement mortar 1:1 (1 cement five sand)

including providing and fixing plastic seat cover for wash

down WC with CP brass hinges and rubber buffers back

plastic seat and including providing and fixing PVC flushing

tank with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and couplings for

connection with inlet out let and over flow pipes 40 mm dia

porcelain enameled flush bend including cutting holes in

walls and making good the same connection the flush bend

with cistern and closet vitreous china.

25 Providing and fixing polished 25 mm thick Granite Shelves 4.20 Sq.m. 4266.24

with full round edge and double side polished of approved

quality Into wall or any required and fixing with cement

slurry & adhesive chemical including moulding of both

exposed edges as directed by engineering in charge etc.

Rupees Twenty Two Lacs Sixty Eight Thousand Five Hundred Eighty Three And Fifty Paise Only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words)

of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

4 change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

Executive Engineer

Tapi ( R & B ) Division