Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 LAccepted-AOC RANCHI ROAD BANS BANGLOW PURULIA | PURULIA | PURULIA | WEST BENGAL | L1 | Accepted-AOC lowest | |
| 2 | L2₹11.9 L+₹16,749.56 (1.43%)Rejected-Finance SADARPARA P O PURULIA P S PURULIA TOWN DIST PURULIA PIN 723101 | PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹12.0 L+₹21,937.46 (1.87%)Rejected-Finance NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L3 | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹26,000
Closing Date
12 Apr 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply, delivery and installation of Open well Submersible pumping machinery, MCC Panel with others electro-mechanical work at Manbazar Baludih for Augmentation of Manbazar PWSS under Purulia Mechanical Division, P.H.E. Dte. In district of Purulia.
2024_PHED_681655_1
22/ EE/PMD/PHED OF 2023-2024
Open Tender
MECHANICAL
Item Rate
60 days
Purulia
Please refer Tender documents.
5 documents required · 5 mandatory
₹26,000
Yes
18 Sept 2024
12 Mar 2024
15 Apr 2024
12 Mar 2024
12 Apr 2024
12 Mar 2024
Amount
Supply & delivery at store of Harizantal type Openwell Submersible pumping machinery as per follwing specification:- Pump: Discharge : 55 m3/hr , Head : 45 Mtr, Impeller: Cast Iron, Motor Body: Cast Iron, Delivery: 65 mm, Casing : Cast Iron, Shaft : Stainless Steel, Motor: Methode of Starting : Star-Delta , Supply Voltage : 3 Phase , 415 V( ±10%) , 50Hz(±5%), (Test certificate & curve chart, warranty certificate will be submitted at the time of delivery). (Make: Approved make of P.H.E.Dte.)
Supply & delivery of Re-wireable porcelain fuse unit type 100 Amp. TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)
Supply & delivery of 1.1KV grade 4 sq.mm x 3 core water proof flat submersible cable with IS 694:2010 for above pump-motor set.
Supply and delivery of 1.1KV grade 16 sq.mm 4 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part 1) 2011 with Up To Date Amendments.
150mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials].
Supply, delivery at site and storage of MSERW Pipes as p er IS: 1239 (part I & II) for suction, delivery and common header lines ( PN 1.0 rating). Nominal Dia.: 80 mm , thickness 4.85 mm
Nominal Dia.: 100 mm , thickness 5.04 mm
Supply and delivery of Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method only. PN 1.0 ratings. Dia.: 80 mm (for individual delivery line)
Dia.: 100 mm (for common delivery line)
Supply and delivery of 80 mm dia. Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm. PN 1.0 ratings.
Supply, delivery at site and storage of 2mm thick CRCA sheet steel enclosed cubical type Indoor floor mounted 415V Power Distribution Board cum Motor Control Centre having required feeders, starters etc. as per Specification as follows : INCOMMER :- 100A/36KA TPN, 415V, Feeder with E/F relay MCCB adjustable OLR with thermo magnetic release for O/C, S/C, E/F & SPD protection with All accories. OUTGOING (with all protection): a) 15 HP star delta Feeder with water level controller- 2 nos (1W+1S spares), b) 32Amp/25KA TPN MCCB Feeder with timer (outdoor lighting)- 1no c) 16 Amp. TP MCB for Chlorination feeder with water level controller-1 nos. d) 32 Amp/10KA DP MCB for Spear feeder-1 no. e) 16 Amp/10KA DP MCB for Spear feeder-1 no. Each individual feeder should consist of indicator lamp (LED), proper rating voltmeter, ammeter and as per SOQ. (for Baludhi Pump house) Make: Approved make of PHED.
Supply, delivery at site and storage of 2mm thick CRCA sheet steel enclosed cubical type Indoor floor mounted 415V Power Distribution Board cum Motor Control Centre having required feeders, starters etc. as per Specification as follows : INCOMMER :- 100A/36KA TPN, 415V, Feeder with E/F relay MCCB adjustable OLR with thermo magnetic release for O/C, S/C, E/F & SPD protection with All accories. OUTGOING (with all protection): a) 25 HP star delta Feeder with water level controller- 2 nos (1W+1S spares), b) 32Amp/25KA TPN MCCB Feeder with timer (outdoor lighting)- 1 no. c) 16 Amp. TP MCB for Chlorination feeder with water level controller-1 nos. d) 32 Amp/10KA DP MCB for Spear feeder-1 no. e) 16 Amp/10KA DP MCB for Spear feeder-1 no. Each individual feeder should consist of indicator lamp (LED), proper rating voltmeter, ammeter and as per SOQ.(for Harekrishnapur Pump house) Make: Approved make of PHED.
Installation of above supplied MCC panel, open well submersible pump motor, sluice valves, non return valve, Enlarger/Reducer and specials, gauges, including supply of all erection items, pipe support, valve support, fabrication of delivery line and common delivery header, laying/drawing of power cables through conduit pipe protection & cable tray (with necessary jointing materials, brass compensation glands), including earthing connection with eating busbar for all pumping machinery, electrical installation & switches etc. as required for completion of work as per relevant IE Rules with the entire satisfaction of EIC in compliance with approved departmental drawing and specification including labour charges and hire charges of Generator, welding set, fuel, lubricants etc. required for completion of work.
Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil.
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
Painting of the installation (viz. valves, pipe lines and other electro-mechanical parts by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per direction of EIC.(for Harekrishnapur and Baludih pump house)
Add GST @ 18%
Add CESS @ 1%
SAIBAL SARKAR
COMBINE ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .