Construction of gate, guardroom and rising of boundary wall of office campus canal colony, Jagadhri.

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within all lead and lift.

Cement concrete 1:3:6 with stone aggregate 20 mm nominal size in foundation and plinth.

First class brick work laid in cement sand mortar 1 : 3 in foundation and plinth.

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded.

First class brick work laid in cement sand mortar 1: 3 in first storey upto 4 metres above plinth level.

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness ( straight and curved) beams, girders, stairs, columns, ( square or rectangular ) battens and lintels etc. excluding steel reinforcement but including centring and shuttering laid in position, complete in all respect.

T.M.T. deformed (ribbed/ or steel) bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete.

15mm thick cement plaster 1:3 on the rought side of single or half brick wall.

Providing and fixing vitrified tiles of size 600 × 600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles.

Providing and fixing vitrified tiles of size 600 ×600 mm of approved make in Skirting/dado laid in any pattern as specified over base of 12 mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles.

Terracing consisting of tiles 22.86 cm × 11.43 cm × 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud morter for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on top of R.C.C. slab including grouting with cement sand morter 1:3 and top surface to be left clean etc.

Cement concrete 1:2:4 gola 10 cm × 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified.

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - Door and window frame size 127 mm X 50 mm with 40 mm wide double rebate

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot- pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of anyfittings, other than specified above, but including labour for fixing the same in position)- commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- 35 mm thick

Factory manufactured wire gauze door and window shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc. (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but inc- luding labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide) 35 mm thick.

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc. (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but inc- luding labour for fixing the same in position)- 30 mm thick.

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

Distempering with washable oil bound distemper ( of approved manufacture ) two coats over one priming coat on new work.

Finishing walls with exterior decorative cement based paints such as snowcem Robbiacem etc. on new work, two coats to give an even shade.

Making, Providing and installation of iron gate including GST and all other charges.

Wire gauze fixed on chowkets with 25 mm thick kail wood cover moulding of full width.

Providing and fixing PVC Rain Water pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. 100 MM dia PVC pipe 6 kg. pressure

Providing & fixing PVC Bend ISI Mark 100 MM dia PVC Bend

Deduction of Old Gate.

jarnailsinghcontractor

Sh Sandeep