Annual Plan-Irinjalakuda Municipality-2025- 26-Pro No 47-26 - Fitness center facilitate to Womens -at ward 5 20-General Civil Work

Ward 5 & 20

11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

16.69:Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

OD475381/2025-2026:Supply and installing trunk bin of dimension 0.3 metre dia or nearest available size , The dust bin is made up of FRP sheet with a 3mm to 4mm thick sheet of diametre 1.25 feet and given a shape of trunk with attractive colour.

OD475382/2025-2026:Supply and installing casty bench of dimension 1.2 X 0.6 m or nearest available size , The VIP bench is made from FRP 'C' channel wood finish (ISO) patti. The thickness of strips is 3-4 mm. The seating portion and back rest portion is made up of FRP and the stands are made up of cast iron in casting process. At the end of strips plastic end cpas are given to prevent dust particles fromn entering in it . The casty bench can accomodate 3 adults at a time. The paint given to the bench will increase the life of the product.

OD475379/2025-2026:Supply and installing Back extension of dimension 1.9 X 0.9 m or nearest available size , The main frame of the back extension is made in 80 NB G.I. pipes. The handle frame is made up of 25 NB G I pipes which is hinged to main frame by a specially designed clamp. Rectangular pipe of size 50X 25X 3 mm thick is provided as supporting structure for thigh rest . Thigh rest or seats are made up of high quality FRP material. Foot rest is made up of aluminium material and attached to main frame with the help of 40 NB G I pipe. All pipes are uniformly powder coated upto minimum 90 micron thickness to avoid corrosion. All open ends of pipe been closed by GI/ HDPE caps for user safety against entrapment.

OD475383/2025-2026:Supply and installing walker of dimension 1 X 0.5 m or nearest available size , The main frame of walker is made up of 80 NB G.I. pipes with GI plating upto 40 micron thickness .This main frame is rest on 80 NB GI pipe to give it strength. Foot rest bend pipe is made up of 40 NB G I pipes. Foot rest is made with the help of high quality FRP material. Foot rest is mounted on main frame with the help of specially designed bearing assembly for its free movement. Bearings used are oil sealed , self lubricated made by reputed company. Handle is made by 25 NB G I pipes . All pipes are uniformly powder coated upto minimum 90 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.

OD475380/2025-2026:Supply and installing Shoulder twirl of dimension 2 X 0.9 m or nearest available size , The main frame of Shoulder twirl consists of galvanized pipe bend to form ring and spokes consists of 20 NB G.I. pipes that connect to each other to form a wheel of Shoulder twirl. This wheel is fixed to 80 NB main support galvanized pipe with the help of 40NB connector pipe with specially designed bearing assemblies. Bearings used are oil sealed, self lubricated made by reputed company. Two wheels with Nylon knobs are provided on centre support in opposite directions to each other. All pipes are uniformly powder coated upto minimum 90 micron thickness to avoid corrosion. All open ends of pipe been closed by GI/ HDPE caps for user safety against entrapment. Handle for rotating the ring fixed over the pipe ring

OD475384/2025-2026:Supply and installing hip twister of dimension 1.2 X 0.9 m or nearest available size , The main frame of HIP TWISTER consists of 80 NB G.I. pipes with handle attached on it. Handle pipe is made up of 25 NB G.I. pipe with suitable rubber grip attached at both ends. The rotating disc made from FRP / HDPE / LLDPE plastic is supported over 80NB G.I. pipe with the help of heavy duty bearing. This Disc is bolted to main frame with the help of 40NB G.I. pipe. All pipes are uniformly powder coated up to minimum 90 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / HDPE caps for user safety against entrapment.

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)