Raimura WR scheme

Amount

(Supply & Erection)

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght- 1200mm / Sand (couhioning): Hieght-250mm, Width- 350mm/Protection: Double layer Bricks Upto 120 sq. mm

Laying of one number additional PVC insulated andPVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trenchin one tier horizontal formation including excavation,sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-200mm, Hieght-1200mm / Sand(couhioning): Hieght-250mm, Width-200mm/ Protection: Double layer Bricks Upto 120 sq. mm

Erection of 9.0 mtrs length of P.C.C POLE at any kind of soil upto a depth of 1/6 th of pole height, including excavation of earth, refilling the pit with with soil upto the ground level, ramming and making complete in all respect

Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm ,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp, Nuts & Bolts etc. as required. and making complete in all respect

Erection of C type bracket for LT 5-wire of 50 x 50x6mm/ 65 x65 x 6 mm( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Angle Cross-Arm,1.0 to 2.5 Mtr.Long 65 x65 x 6 mm (Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,1.3 to 2.8 Mtr.Long75 x40 x 40 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of M.S.Channel Cross-Arm,0.6 to 2.8 Mtr.Long100 x50 x 50 x 6 mm ( Excluding the cost of Back Clamp, Nuts & Bolts)

Erection of 11KV Pin insulator along with Pin.

Febrication of Cross-Arms by MS Channel / MS Angle as per specification

Laying and Stringing of 1KM (Single Conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting and binding etc. Complete as required.

Erection of 9 KV,5KA single pole metal oxide gapless type LA ,including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of three nos including necessary connection complete as per technical specification. (Excluding the cost of back clamp, Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos including necessary connection complete as per technical specification.(Excluding the cost of back cIamp,Nuts & Bolts)

Installation/Positioning of 11/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required

Dismantling of 11/0.430KV,3-Phase 63KVA of Distribution Transformer on Pole with necessary connections

Erection of 8.0 mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Carriage of 9.0 mtrs length of P.C.C Poles by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis,including loading, unloading and stacking asrequireda) Upto the lead range 25KMi) For maximum 4 (four) poles From MMD Store to Sub Division Store

Carriage of 8.0 mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 25 KM i) For maximum 8 (eight) poles From MMD Store to Sub Division Store

Carriage of materials such as Cable,AAC, AAAC,ACSR,G.I,Wire,Cross-Arm,Stay set,lnsulators etc., by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.b) Beyond 25 KM upto the lead of 50KM From MMD Store to Sub Division Store

Carriage of 11/0.430, 3-Phase 63KVA by Mechanical Transport from the Site to Workshopsite including loading, unloading as required a) Upto the lead range 25KM From MMD Store to Sub Division Store

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 11 KV grade of all size in the GI Pipe/HDPE for riser including tieup ofPipe with pole by the help MS Flat Clamp (excludingcost of Clamp and Nut&Bolts) as required Up to 400 sq. mm including fitting & fitting of the extra cablee on pole top.

Providing of Pre-cast cement concretecableidentification route marker (1 cement: 2 coarse sand4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL.The marker snail be embossed "DANGERS: TSECL,ELECTRIC POWER CABLE” with Black colour letter {both side) The visible part shall be ainted with Yellow colour japan paint. (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Grouting of Steel Tubular 8 mtr Pole of ratio 1:2:4 (1cement:2 riversand:4 Jhama brick Aggregate of 20mm. Nominal size) including supply of cement, sand and brick aggregate. Complete with excavation, refilling of each, ramming along with centering and shuttering as required

Carriage of G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required (b) Beyond 25 KM upto the lead of 50km From MMD Store to Sub Division Store

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required Up to 150sqmm

Supply of FRLSH XLPE CABLE (HT) 3Cx50 sq.mm

Supply of Wooden Plank

Supply of HDPE Pipe Pe-100 Grade PN 8 (SDR 17) 90 mm dia,Wall thickness: minimum-5.3mm, maximum-5.9mm

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

SAJAL DAS (BID ID -173841)