PROVN OF WALL PANELLING AT HQ BUILDING AND SOUND PROOFING AT VARIOUS LOCATIONS AT AF STN CHANDIGARH

Amount

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F Hollow PVC Wall Lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces by wire brushes & stopping of surfaces & leveling/ edging the disturbed surface/ edges using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for 85mm thick Gypsum partition interior wall (double layer boarding with 8mm thick prolad) including providing and fixing system components which includes fixing of frame , floor and ceiling channel (0.55mm thick, 52mm wide and having two flanges of 30mm each) to the RCC floor and slab with approved fasteners @ 600mm center to centre respectively. Frame wall studs (.055 mm thick, 50mm wide having one flange of 34mm another of 36 mm. these wall studs are placed at 610mm centre to centre in floor and ceiling channel. Double layered of 8mm thick TUFFBLOCK boards to be screwed fixed vertically to either side of frame wall studs with 25mm long drywall screws at 300mm centre to centre. In the centre of the board there is layer of techsound 2.5mm for sound isolation , to stop the noise and inside the hallow cavity filled with the rockwool. The board to be fixed by screws to the metal framing at the periphery, openings and cut edges should be at 150mm centre. The horizontal and vertical joint of the tuff block boards on both sides of the metal frame work must be staggered so as to avoid through and through joints, MS fixing channel of 99 mm with (.9mm thick having two flanges of 9.50mm each) to be provided at the horizontal joints of two boards fixed to the studs using metal to metal flat head screws. All joints to be taped and finished with 50mm wide paper tape & all purposed joint compound including preparation of all exposed surfaces and levelling using necessary filling compound of Birla/ JK wall care putty to obtain smooth finished surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. Note:- (i) All opening and cut shall be sealed with fire sealants as approved. (ii) All external 'L' Junction shall be finished with metal corner tape if required.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. complete all as directed.

M&L for point wiring complete with multi stranded copper conductor cable of size 1.5 sqmm PVC insulated unsheathed FRLS colour coded 1100 volts grade drawn through in existing surface/ concealed conduits including new sunken terminal boxes duly epoxy painted for mounting modular switch/ sockets etc. including PVC insulated unshearthed 1.5 sqmm multistranded copper conductor cable FRLS colour code cable 1100 volts grade for earth continuity for the following complete all as specified and directed:-

One light controlled by one switch/ fan point controlled by one switch through regulator.

One three pin 5 amp socket outlet multipurpose on independent board.

One three pin 5 Amp switch socket outlet on the same board.

All as per item No 6.00 above but with 2.5 sqmm size PVC insulated cable for 3 pin 15 amp multipurpose outlet on independent board including 2.5 sqmm PVC insulated copper cable for earth continuity on independent board complete.

S&F modular switch 1 way 6 A, 1 module all as specified and directed.

S&F modular socket outlet, 2/ 3 pin combined, 6 Amps, 2 module, 230 volts all as specified and directed.

S&F modular socket outlet, 6/ 16 Amps, 2/3 pin combined, 230 volts, 2 module all as specified and directed

S&F modular switch 1 way 16 A, 1 module all as specified and directed.

S&F modular type electronic ceiling fan step regulator, 120W - 2 module for 1200/ 1400mm sweep ceiling fan complete all as specified and directed.

S&F in replacement submain wiring complete with two runs of 6.0 sqmm single core, multi-stranded, FRLS PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through in existing concealed conduit including one run of 6.0 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 6.0 sqmm multi-stranded cable and one run of 6.0sqmm cable as earth continuity conductor shall be considered as one unit length.

S&F sheet metal enclosure single pole and neutral with a two pin & earth plug and socket etc complete with MCB SP 20 Amps, 'B' curve, 240 volts 10 KA complete all as specified and directed.

S&F LED luminaire 600mm x 600mm, 35/ 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals, complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 4 feet, 18 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

SS BUILDERS

M/s Bhagwati Enterprises

Baba Engineers and Contractors