SR to Judge Quarter at Vapi, Ta. Vapi, Dist. Valsad ( Repairs to Flooring work, Sanitary work, Door Window,Colour work Electrification work Etc.)

No figures

1 Dismentaling tiled of stone floors laid in mortar 350.00 Sqm 48.21

including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.

2 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 24.00 Sqm 1397.83

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for DARK shade

3 Providing and laying Anti skid Ceramic tiles 6mm thick 38.00 Sqm 970.07

in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

4 Providing and laying white glazed tiles 6mm thick in 217.00 Sqm 1073.90

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3- coarse sand) and jointed with

white cement slurry

5 Dismentling doors, windows, ventilators etc. (wood or 28.00 No 187.71

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not exceeding

Sq.M. in area.

6 Providing and fixing window having extruded aluminum 7.00 Sqm 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc

Item Rate In

Description of Item Quantity Unit Amount

No figures

7 Providing and fixing standared extruded of alluminium 1.00 Sqm 1175.56

section of size 63mm x 38.10mm x 1.2mm , @ Wt.

Kg/mt with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

8 Demolition of terrace including stacking of serviceable 237.00 Sqm 63.80

materilas and disposal of unserviceable materials with

all lead and lift.(i) Brick tile covering..

9 Providing and fixing 35 mm thick single flush door 19.00 Sqm 3113.83

shutter, solid core with inserted Non teak wood frame

inside the aluminium section for durable grip of hinges

& single shutter with required teakwood batten having

1mm thick lamination on both side, Durable Grip shall

be providing with both side 15cm long stainless steel

handle and necessary Locking system, fixtures &

fastenings etc. directed by engineer in charge.

10 Dismantling santtary fittings like wash basin . W.C. pan 12.00 No 405.65

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift

11 Providing and fixing concealed center point to wall 5.00 Rmt 442.03

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [E] 40mm.

12 Providing and fixing concealed center point to wall 90.00 Rmt 249.72

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

13 Providing and fixing concealed center point to wall 220.00 Rmt 166.86

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

14 Providing and fixing wsh down water closet (European 4.00 No 2214.36

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in

white colour with Plastic seat and cover { Hindustan,

Cera, Parryware or equivalent } Including & fixing 'P' or

'S' trap,Flush Cock 25 mm Dia G.I Inlet Connection.

Item Rate In

Description of Item Quantity Unit Amount

No figures

15 Providing and fixing water closet squatting Pan (Indian 4.00 No 1534.23

type W.C. Pan) size 580mm (Earthwork, bed concrete,

foot reste and trap to be measured and paid for

separately) (A) Vitreous China.(I) Long pattern = White

colour and Flush Cock 25 mm Dia G.I Inlet Connection.

16 Providing and fixing screw down bib taps of following 8.00 No 186.82

size.(B) Brass chromium plated screws down Bib Tap. (i)

17 Providing and fixing Gun metal check or non-return 8.00 No 420.63

fullway wheel valve.(C) 25mm dia.

18 Providing and fixing Gun metal check or non-return 8.00 No 663.42

fullway wheel valve.(E) 40mm dia.

19 Providing and fixing cast iron (Spun) Nahni trap of the 12.00 No 606.08

following nominal diameter of self cleaning design with

C.I. screaed down or higned grating including cost of

cutting and making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

20 Providing and fixing S.W. gully trap with C.I. grating brick 6.00 No 1246.91

masonry chamber and water tight C.I. cover with frame

of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm size

P or R type

21 Providing and fixing C.P. brass towel rail comlete with 8.00 No 603.19

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

22 Providing and fixing to wall ceiling and floor 10.0 Kg. 54.00 Rmt. 336.23

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

23 Providing and fixing washbasin with single hole for pillar 4.00 No 1978.98

tap with C.I. or M.S. brackets painted white including

Rubber plug, sutting holes and making good the same

but excluding fittings and also including rate of C.P.

brass waste for washbasin or sink (A) 32mm dia. , M.I.

fisher union for washbasin or sink (A) 32mm dia ,Rubber

Plug for sink and .pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts. (i)

15mm dia.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

24 Painting Two coats (excluding priming coat) on 53.00 Sqm 94.81

previously painted steel and other metal surface with

enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign

Item Rate In

Description of Item Quantity Unit Amount

No figures

25 Excavation for foundation upto 1.50 mt depth including 48.40 Cum 117.08

sorting out and stacking of useful materials and

disposing the excavated stuff all lead & lift(A) Loose or

soft soil.

26 Providing and laying cement concrete 1:4:8 (1- Cement : 15.10 Cum 2660.45

4- Coarse sand : 8- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

27 Steel work, welded in built up sections framed work 6000.00 Kg 90.48

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat oil

paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and

cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like.

28 Providing and fixing of Ridge flashing for roof panel shall 145.00 Sqm 858.67

be made out of 0.5 mm thick pre coated GI sheet . The

Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall

have plastic protective guard film of minimum

microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or

self drilling/self stitching fastners @ maximum 450 mm

c/c along length of capping/flashing etc complete.

29 Providing and laying water proofing treatment with 237.00 Sqm 1099.89

china mosaic tiles flooring over avg 50 mm C.C. 1:2:4

bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more

than 2.5CM of ceramic / glazed tiles ( one for more

colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water

proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar

up to surface with using white cement and colour

pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends

any patens or design as per drawing and cleaning by

using oxalic acid etc. complete.

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Item Rate In

Description of Item Quantity Unit Amount

No figures

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Credit Value of Dismentalled Materials of Amount Rs. 13472.00 shall be recovered from the 1st

1 Running Bill of the Contractor.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

2 Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

5 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Vapi ( R & B ) Sub Division Valsad ( R & B ) Division

Vapi Valsad