Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC | ₹8.4 L | L1 | Accepted-AOC QUOTED RATE STOOD 1STLOWEST |
| 2 | L2₹8.5 LRejected-Finance N A | ₹8.5 L | L2 | Rejected-Finance QUOTED RATE HIGHER THAN 1ST LOWEST |
| 3 | L3₹9.2 LRejected-Finance | ₹9.2 L | L3 | Rejected-Finance QUOTED RATE HIGHER THAN 1ST LOWEST |
Tender Value
₹9.7 L
EMD Value
₹19,317
Closing Date
27 Nov 2025, 3:00 pmClosed
The Executive Engineer, DWS Division Kanchanpur
Office of the Executive Engineer, DWS Division Kanchanpur, North Tripura PIN _799270
Re-winding of burnt up motor and repairing of different types of pump etc. at different DTW,Innovative scheme within the jurisdiction of Damcherra RD Block under DWS Sub Division Damcherra.Gr-II.
2025_CEDWS_67474_1
52/EE/DWS/KCP/2025-26
Open Tender
Civil Works - Water Works
365 days
Damcherra
Please Refer Bid Document
6 documents required · 6 mandatory
₹1,000
₹19,317
2 Feb 2026
21 Nov 2025
27 Nov 2025
21 Nov 2025
27 Nov 2025
21 Nov 2025
Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
Repair and mtc of 15HP/17.5HP motor suitable for 7500 GPH capacity Submersible pump set by complete dismentaling including providing and fitting fixing of PVC (IS-8783-1978) insulated electro grade copper(IS 613-1984) conductor winding in stator and all necessary spare parts and reassembling the same in/c servicing of motor and necessary trial run as per specification and direction of the Engg-In-Charge.
Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge.
i) Bronze/SS Impeller
ii) Bronze grade LTB 2 / Cutless rubber bush
iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve
VIII) SS impeller lock
iX) SS half coupling
X)Stud bolt & nut
xi) Dismantling, repairing, reassembling, servicing
Repair and maintenance of 5000 GPH capacity ubmerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge.
i) Bronze/SS Impeller
ii) Bronze grade LTB 2 / Cutless rubber bush
iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve
iv) Stainless steel pump shaft
V) Cast iron grade(FG200)discharge casing
VI) Cast iron grade(FG200) suction casing
VII Cast IronGrade(FG200)pumpbowel/diffuser
VIII ) SS impeler lock
ix ) SS half coupling
X) Stud Bolt and Nut
xi) Dismantling, repairing, reassembling, servicing
Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge.
i) Bronze/SS Impeller
ii) Bronze grade LTB 2 / Cutless rubber bush
iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve
iv) Stainless steel pump shaft
V) Cast iron grade(FG200)discharge casing
VI) Cast iron grade(FG200) suction casing
VII Cast IronGrade(FG200)pumpbowel/diffuser
VIII ) SS impeler lock
VIII ) SS half coupling
iX) Stud Bolt and Nut
xi) Dismantling, repairing, reassembling, servicing
Repair and maintenance of 15000 / 20000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification anddirection of the Engineer-in-charge.
i) Bronze/SS Impeller
ii) Bronze grade LTB 2 / Cutless rubber bush
iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve
VIII ) SS impeler lock
VIII ) SS half coupling
iX) Stud Bolt and Nut
xi) Dismantling, repairing, reassembling, servicing
Providing and fitting fixing of thrust bearing of S.K.F. make or equivalent for submersible motor.
Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
For SWTP Vallukcherra Raw water Centrifugal pump motor:- 1x01=01 nos
For SWTP Damcherra Raw water centrifugal pump motor:- 1x02 =02 nos
For SWTP Damcherra Clear water centrifugal pump motor:- 1x02=02 nos
Repairing of centrifugal pumps by providing and replacing of impeller ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge.
B. Bronze Impeller ii. for 20000 / 25000 GPH capacity
Repairing of centrifugal pumps by providing and replacing of Bush (sleeve) ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge.
A).SS / GM Bush (sleeve)
i). for 20000 / 25000 GPH capacity
B). C.I. Bush (sleeve)
i). for 20000 / 25000 GPH capacity
Repairing of centrifugal pumps by providing and replacing of coupling ( conforming to IS : 1520 ) with necessary fitting as per specification and the direction of the Engineer-in-charge.
i). for 20000 / 25000 GPH capacity
Repairing of centrifugal pumps by providing and replacing of SS shaft (SS-410) as per specification and the direction of the Engineer-in-charge.
i). for 20000 / 25000 GPH capacity
Repairing of centrifugal pumps by providing and replacing of joining paper ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge.
i). for 20000 / 25000 GPH capacity
Repairing of centrifugal pumps by providing and replacing of Ball bearing ( conforming to IS : 1520 ) as per specification and the direction of the Engineer-in-charge.
i). for 20000 / 25000 GPH capacity
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_68662.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
BOQ_68662.xls
BOQ • 0.37 MB
DNIeT52.pdf
Tender Documents • 4.74 MB
Download all tender documents and submit your bid