Construction And Beautification Works Of Haritage Path (Cobble Stone) From Joank Towards 84 Kutiya/Bitthal Ashram At Left Bank Of Ganga River In Block Yamkeshwar Of District Pauri Garwal

Amount

Excavation in hilly area in ordinary rock not requiring blasting by mechanical means without using Dozer including cutting and trimming of slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m as per Clause 1603.2.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per directionof Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling of Flexible Pavements Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 By Mechanical Means Bituminous Courses

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704,1202 and 1204 Random rubble masonry In cement mortar (1:5)

Scraping Plaster in Lime or Cement Mortar from Brick/Stone Masonry as per Technical Specification Clause 202.

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. By Mechanical Means

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204(For height upto 5 m) Nominal mix (1:2:4)

Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete

Providing and fixing 10x10x10 cm stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge. sqm

Providing and fixing 10x10x7.50cmstone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge. sqm 1897.95

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses R.C.C. grade M 25

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Three-seater cast Iron Banch with Back as per Design & schedule Enclosed.Decorative design three seater bench with Cast Iron sides as per design, having back height of 785mm and sitting width of 375mm suitably casted, disc grinded and pin grinded for smooth surface finish with proper removal of casting flushes each side having 12 nos. of holes of size 10mm drilled at inner seating ends and two nos. of holes drilled and tapped at both bottom ends of each side to screw hold fasts of size 12mm and length 150 mm for grouting of bench ends into C.C. Each bench side suitably spray premiered dried and subsequently spray painted with superior quality enamel paint of Olive green color. The two bench sides held together with 12 nos. of M.S. tubular pipe of size 65x22 mm 1500 mm long

Cast Iron Decorative Dustbin as per Design & schedule EnclosedCast Iron Decorative Dustbin as per Design & schedule Enclosed.Cast Iron Litter Bin having litter bin shell of size 500 x 500 x 900mm. Each shell having 4 nos. of Cast Iron Panels of width 15’’ and height 29’’ (as per design enclosed) mounted in central position on all four sides of the Litter Bin Shell. Suitably framed for aesthetic looks of the bin. Each Litter Bin provided with FRP litter container of size 480 x 480 x 900mm mounted in the centre of the litter bin shell. The FRP Bin provided with an opening on the top center of width 100mm for dumping the litter.

M/S RIDAM ASSOCIATES

Bidder Name

M/s Construction Gallery