Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC NO 1 HPPWD DIVISION DHARAMSHALA HIMACHAL PRADESH | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹3.3 L+₹36,910 (12.6%)Rejected-Finance | L2 | Rejected-Finance Due to higher bidder |
Tender Value
₹2.7 L
EMD Value
₹5,400
Closing Date
8 Oct 2020, 11:00 amClosed
Executive Engineer
Executive Engineer DMC Dharamshala
C/O left out work near the H/O Kaistha and Shankar in Ward No.13 Sub head - P/L Inter locking paver block, CC work
2020_UDDHP_40921_6
3352-57 DMC
Open Tender
Civil Works - Others
Item Rate
90 days
Dharamshala
Please refer tender document
9 documents required · 9 mandatory
₹350
Comm. DMC Dharamshala
₹5,400
4 Oct 2021
23 Sept 2020
8 Oct 2020
23 Sept 2020
8 Oct 2020
23 Sept 2020
Amount
Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. in Pick work including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in edges of slab and breaks in floors and walls including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in:in foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work in:in foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 20 m nominal size) and curing complete excluding cost of form workin:Walls including attached buttresses,pilasters and their caps and bases string courses etc. upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.
Providing and laying heavy dutyprecast cement conrete inter lockingpaver blocks vibro compacted upto M-50 grade i/c border or kurb block greyor coloured over sub-base of concretewith 25mm thick average thickness ofcement mortar 1:4 (1 cement : 4sand) laid over and jointed with neatcement slurry mixed with pigment tomatch the shade of blocks i/c curingrubbing & polishing complete (Subbase concrete floor to be paid for 60mm thick inter locking blocks including carriage of material in all leads and lift and direction of Engineer-in-charge.
ankur mahajan
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .