Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹9.5 Laccepted-aoc | accepted-aoc |
Tender Value
₹12.7 L
EMD Value
₹32,000
Closing Date
21 Sept 2026, 5:00 pmClosed
Krishna Bhagya Jala Nigam Limited
EXECUTIVE ENGINEER
Improvements to office building and including furniture to the nlbc Sub-Division-18 at Rodalabanda.
KBJNL/2026-27/IW/WORK_INDENT3754
KBJNL/2026-27/IW/WORK_INDENT3754
Open
Irrigation and Other Works
Electronic Documents, First(One Cover)
KBJNL Division NLBC Divn No 4 Rodalabanda
8 documents required · 8 mandatory
₹500
₹32,000
21 Sept 2026
10 Sept 2026
16 Sept 2026
Improvements to office building and including furniture to the nlbc Sub-Division-18 at Rodalabanda.
Shotcreting R.C.C. columns, beams and slabs etc. in 50 mm thickness with approved design mix M25 concrete having the specified minimum characteristic compressive strength with OPC / PPC / PSC coarse s...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawin...
Providing and fixing in position windows half paneled shutters at bottom and half glazed at top for window shutters with Honne wood stiles and rails of 35mm. thick, 75mm wide in two halves with panels...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 200x10mm
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm
Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primerapplied @0.75 ltr/10 m² of approved brand and manufacture to give a...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES: Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mmn thick PLPB table top, 25mm thick PLPB with edge bonded end tab...
Providing and Supplying Meduim Back Revoling chairs with Mesh Back And Soft Cusioning Seat, Fixed lumber Support and Gas Lift, Knee tilt Mechanism of of featherlite/ Godrej or equivalent make, includi...
Meeting Table - roviding, Supplying and Fixing Meeting table made out of 25mm High DensityFibre Board with both side laminate of approved colour and shape with 4 sides vertical supportwith 19mm both s...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 1282 Grade l Type ll, in panelling fixed in aluminum doors, window...
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.2 HP, Size 65x50 Head 13M, Discharge 462 LPM
Supply of acer High End Desktop Computer with Warranty 3 Year -acer (Veriton M4715G) -Desktop Computer with TableMount Monitor System with Compatible Chipset as per Processor make with Minimum 6USB Po...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
TENDER NO FOR HW AND OFC BUILDING KW1.docx
Instructions to Tenderers • 0.05 MB
Building specification.doc
Others - Building specification • 0.42 MB
DTP-3754.docx
Tender Document • 0.89 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .