Providing, installation, testing and commissioning of submersible pumpset of 3000GPH x 100 mtrs head along with allied electro-mechanical works at tube well Plouta.

Amount

Providing, Installation, Testing and Commissioning of 3000 GPH X 100 Mtr. head submersible pump set-01 no. as per IS reputed make along with allied electro-mechanical works at Tube well Plouta.Providing of 3000GPHx100mtr head submersible pump set to site of installation. Fabrication of adopter Nipple and threading the Pipe for screwing into the delivery portion to the submersible pump and other end of the adopter nipple is welded with MS flange of required size fabricated out of MS Plate for fixing with the column pipe. Two number nuts of required size are to be welded on opposite side so that clamping bolt of the tie rod can pass through it. Fabrication of the tie rod clamping arrangement for clamping the pump and motor to the upper adopter nipple, fabricated out of MS Plate as per required size at site. The upper ends of these flat strips should be welded with full threaded bolt. These bolts are to be passed through the nuts welded on the adopter nipple piece, fastening of double nuts on both sides. Coupling of both pump and motor, properly checking of movement of the pump, tightening of the adopter nipples to the delivery side of the pump, tightening of tie rods. Providing and fitting of 1no. M.S Cap 15” dia for holding column pipes. Providing &fitting of 3 core 6mm sq submersible cable(double length) as per requirement for lowering in tube well, connecting of one end of cable to submersible motor and other end shall be duly connected with control Panel/MUG. Extraction of the existing submersible pump set and Lowering of new submersible pump set into the tube well and requisite material such as rubber flanges, nut/ bolts by using special tools and tackles. The job also includes repair/replacement of damaged column pipes if any. Making all electrical connections of submersible Pump set with control panel by proper thimbling and crimpling all cable ends and then testing and checking for specified amperage on full load. Providing/fitting of main switch 200 Amps. The job includes cost of material, manual as well as mechanical carriage, cost of hiring tools and tackles, labour charges etc. Complete Job.

JAGDEMBAY MECH ENGG WORKS