ADDN/ ATTN OF BLDG NO T-132, T-133, P-79 OF MH, P-01 (ECHS) AND P-60A (OR MESS AND COOK HOUSE) UNDER GE DEHRADUN

Amount

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete.

All as per itme No 1 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

Supply and fixPressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate)

Supply and fix Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 ( 12.5 mm stone aggregate)

Supply and fix 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

M&L for 35mm thick 1st class teakwood plain fancy, framed panelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S & F 30 mm thick Block boards, grade 2 quality, i n t e r i o r grade, decorative type with decorative face veneer on one face commercial type, factory made door shutters complete all as specified and directed.

S & F 1 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Supply and fixfactory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge

Supply and fix 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified

Supply and fix factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified

Supply and fix factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc.complete all as specified

Supply and fix of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete .all as specified

Supply and fix4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified

Supply and fixmild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete.

Supply and fixstainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified

Supply and fixstainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

Supply and fix stainless steel handles 150 mm long one piece and fixed with screws/welded to frame ,complete

Supply and fix300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete.

Supply and fixfloor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete.

M&L applying two coats of Synthetic paint on new /old wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete all as specified

Supply and fixPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

Supply and fix Rolled sections as in main and cross beams, truss ,hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, post, pipes; fixed with angle cleats or other connecting plates Fe-290 (Gde E-165 complete all as specified and directed Note: Heiiow section will not be Used

M&L applying two coats of synthetic enamel paint on new /old or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

Supply and fix SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends complete all as specified

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Material and labour for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4incl dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified complete all as specified and directed.

M&L glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm 8-- 10 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete.

M&L Double Charge vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor / skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. .

M&L 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Cutting/griding and polishing of exterior kota sotne/ terrazzo flooring

Supply and fixs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified

Supply and fix vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed.

Supply and fix vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

Supply and fix 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete.

S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed.

Supply and fix vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete.

Supply and fix pillar taps, brass, with capstan head, fancy type chromium , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F powder coated aluminium window tripple/ double(sliding ) shutter with frame and shutter and glazing wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc complete all as specified and directed. aluminium sections shall be given below: - Frame;- 85x44.5x1.20 mm thick fixed with rawal plug Style;- 44.5x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 5 mm thick frosted/ plain glass ( as directed) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated

Supply and fix 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

Supply and fix looking mirror 450x600mmx6mm mounted on decorative type fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed

S&F in repair 32mm dia PVC waste pipe for WHB and sink 90cm long with union,complete all as specified and directed.

S&F in repairs brass chromium plated towel ring complete all as specified.

Supply and fix 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm.

Supply and fix15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Supply and fix 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc half but n exc full brick wall complete all as specified & directed.

Supply and fixin repair UPVC (SWR) cowl, 75 mm bore' complete all as specified.

Supply and fixin repair UPVC (SWR) cowl, 110 mm bore' complete all as specified.

Supply and fix75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified

Supply and fix 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified

Supply and fix 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete

Supply and fix 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete

Supply and fixin repair PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 110/75 mm outlet dia complete all as specified and directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge.

Demolition of Brickwork or stone/bou-lder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified

M&L brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete.

Supply and fixing Hollow profile PVC sheet wall panelling of thickness 5 mm, consisting of panel having size 1220x2440 stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for astheic looks, the exact size of the panel and correspondingly the grid may vary depending on size of wall, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified

Material and labour for applying interior grade wall care putty 1 - 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair Complete all as specified

Material and labour for applying exterior grade wall care putty 1 - 1.5mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

Material and labour two coat weather coat exerior emulsion paint any tint over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete

Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete.

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.

Supply and fix150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected

M&L for PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.

Material and labour for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed.

M & L for use and waste of formwork to soffits of RCC Shelves and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of RCC Shelves or similar work thickness exc. 05 cm and not exc. 10 cm in rough finished surfaces of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in slab and shelves supported on walls including demolition complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor / skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

Constn of soakage well, excavation in any type of soil, foundation PCC 1:3:6, wall of honeycombed , Brick masonary in CM, RCC cover slab size of well 2.40 dia and 3.00m depth , including demolition of existing old unserviceable soakage well and filling soil to match surface with existing ground surface complete all as specified.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and directed.

M&L returing filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed

Removal of excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surfaces of concrete complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) type A1 1:11/2:3 (20mm graded aggregate) in Foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as spefied and directed.

M&L for Formwork to chullah hoods, cha jjas, troughs and similar items in cluding edges, flat rough finished surface of concrete complete all as specified.

M&L for Reinforced cement concrete (nominal mix) type A1 1:11/2:3 (20mm graded aggregate) in Chajjas complete all as specified and directed.

-Ditto- all as per item No 94 above 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders ®

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal for rough finished surfaces of concrete complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) typeA1 1:11/2:3 (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) type A1 1:11/2:3 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Supply only Liquid water proofing compound

M&L for 40mm Damp proof course in cement concrete course 1:2:4 type B0( using 12.5mm graded stone aggregate) to horizontal or vertical surfaces mixed with integral water proofing compound as per manufacturer instructions including necessary formwork complete all as specified and directed.

M&L for Cement concrete 1:2:4 B-0 (using 12.5 mm graded stone agg) in coping, bed plates and chamfered angles and throating etc complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Hardcore of broken stone gauge exc 40mm but n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), 75 mm thick as in sub base complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified

-Ditto- all as per item No 37 above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed

Supply and fix aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly Note- Work will be carried out up to 5th storey

Supply and fix aluminium window shutter including rubbre beeding gasket, locking arragement, jointing clip of all necessary fitment complete all as specified and directed. aluminium sections shall be given below: - Shuter frame;- Z section 2mm thick as per near by exiting Glazing beading;- 0.70 mm thick Aluminium window locking handle Glass;- 4 mm thick frosted/ plain glass ( as directed) Aluminium stopper cleat Note- Work will be carried out up to 5th storey

Supply and fix aluminium window shutter including rubbre beeding gasket, locking arragement, jointing clip of all necessary fitment complete all as specified and directed. aluminium sections shall be given below: - Shuter frame;- Z section 2mm thick as per near by exiting Glazing beading;- 0.70 mm thick Aluminium window locking handle wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat

Supply and fix in repairs aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge

S & F in 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specifed.

S&F for Steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified

M&L for preparation of new/previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint all as specified in SSR Part I and directed by Engr-in-charge.

S&F 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified Make :- Kitply/centuryply

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete.

S & F 18-20 mm thick Block boards, grade 2 quality, i n t e r i o r grade, decorative type with decorative face veneer on one face commercial type, factory made door shutters complete all as specified and directed.

M&L Framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' .including dismantling old wooden/iron work complete all as specified and directed

M&L mild steel plain black sheet 1.60 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint including dismantling old iron work complete all as specified and directed

S & F in repairs venetian blinds roller type, made out of fabric cloth of approved printed and exclusive shade, fixed as per the instructions of manufacturers and all as specified.

Material & Labour for stainless steel (Grade 304) railing/ corner gaurd made of hollow tubes,channels, plates, sheets etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old u/s S/S complete all as specified and directed

Material and labour non-skid / mat finish designed coloured joint free parking ceramic tiles of size not less than 400 mm x 400 mm x 8-10 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of tiles complete all as specified and directed

M&L for Machine pressed any tint prepolished designer precast concrete factory made interlocking paver block with gray cement & pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade ISI marked

Supply and fix in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed

S & F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed.

Supply and fix in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge.

Supply and fix in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S & F in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed.

M&L for preparing of old plastered and unplastered surfaces of wall and applying two coats of distemper oil emulsion complete all as specified & directed by the Engr-in-Charge.

Excavation over areas n.exc 1.50 m depth for foundation,etc getting out in hard/dense soil complete all as specified and dircted.

Supply and laying 450 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for 60 mm thick vibromatic reinforced precast cement concrete 1:2:4 (using 20mm graded stone aggregate) with 1mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed by Engr-in-charge (Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will carried out with ponding method)

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls/floor etc complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls/floor etc complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm dia, bend with oval acess door, T' socket reducer etc complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, bend with oval acess door, T' socket reducer etc , complete all as specified and directed.

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe.grouted in PCC 1:2:4 complete

S&F Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe.grouted in PCC 1:2:4 complete

M&L for 50 users Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. (Ref TD/217 of CE Bareilly Zone )

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as directed.

M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc pressed iron/steel suction modular metal flush box of thickness1.2mm including modular frame plate as required of module for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sinking's for boxes and making good to walls,floors etc complete all as specified and directed by Engr.-in-charge of following.

(a) One light point /exhaust fan controlled by one way switch.

(b) One fan point , controlled by one way switch through Regulaor

(c) One bell point, controlled by bell push switch.

(d) One three pin 5 Amp socket on same board with other switches

(e) One three pin 5 Amp socket on independent board

All as per Item No 156 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & Fix Modular switch single pole, one way , 6 Amp, 1 module complete all as specified and directed.

Supply and fixing Modular switch single pole, one way ,16 Amp, 1 module complete all as specified and directed.

S & F Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed

S & F Modular socket 6A/16 Amp 2/3 pin combined 2 module complete all as specified and directed

S& Fix sheet metal enclosure single pole and netural earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts , complete all as specified and directed.

S & of moduar bell push 6 Amp 1 module.

S & Fix calling bell ding dong type AC 230 Volt single pole

S & Fix in repairs for step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 100/120 watts.

Supply and fix in repairs for ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified

S & F Lamp holder polycarbonate insulated body, with back plate with and incl LED lamp retrofit 9/10 watts complete.

S&F wall mounted LED tube light fitting 1x9 watts, 2 feet extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F wall mounted LED tube light fitting 1x20 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete pre-wired including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete.

S&F Meter Distribution board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shall be embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04/6 Nos incuding electrical connection with existing system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed.

S&F in repair temper proof LCD display Digital Energy Meter,single phase, 2 Wire AC, 230V, Cap 10-60A, Push to fixed type Box with marker of qtr nos on EM as directed by Engr-in-charge. Make : Secure, L&T,HPL. Note :- Old u/s electric meter will be deposited in MES store yard.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed

Supply and fix electric water heater, storage type steel body and heating element upto 2 KW of capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

S&F exhaust fan,steel body AC single phase ,230 V of size 300mm sweep with , blades, and frame and louvers

Supply and fixing in replacement for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 100/125 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete. Note:- DB and MCCB/MCB shall be of same make and paid separetaly

M&L for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar.

Supply and fix in repairs MCCB 100 Amps FP 415 Volts having breaking capacity 16 KA with and incl spreader link kit complete suitable for fixing as incoming in polycarbonate busbar complete all as specified and directed.

S&Fix in repairs MCB single pole 240 volt, 10 KA, 5-32 Amp, 'C' series confirming to IS complete all as specified and directed.

S & F , Isolator SPN 25 to 63 Amps, 240 Volts having braking capacity 10 KA.

M &L MCB, Triple pole and neutral, 40 to 100 Amp, `C' series, 10KA, 415 Volt, complete all as specified.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit/flexible conduit where reqd and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire upto common earth and connected to earth dolly complete incl taking out old unserviceable submain all as specified & directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete.

Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron 32x6mm by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 20 mm dia medium grade watering pipe with funnel including charcoal, dust, salt , PCC M-15 type B1 in pit with angle iron (25x25x3) mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle , test point etc. in and including light grade GI protection pipe 40mm bore up to 5m lenth for drawing in earth lead wire all shown in electic plate No 3 of SSR Part-I complete with necessary earth work in any type of soil removal to a distance not exc 50m testing on completion complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 11000 volts grade of size 3.5 core 95 sqmm.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 16 Sqmm 4 Core.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Sheet metal enclosure MCB DB, double door, 08 way SPN, 240 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P, 20 degree protection complete.

M&L Point wiring with 2.5 sqmm single core PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked with mulitstandard copper conductors and earth continuty wire with similar 2.5 sqmm cable (incl connecting to earth dolly) drawn through and incl rigid PVC conduit and conduit accessories concealed in wall by cutting rooves except on ceiling and panel in suitable way with clamps screw etc with and incl concealed /surface suitable box suitable for switches, socket etc and including suitable box and plate frame as required at site complete all as specified and directed

S&F Sheet metal enclosure for DB's (double door), IP-43 IK-09 protection suitable for MCB single pole and neutral, 12 way, 240 volts with 200 Amp rated busbar, fixed flush in wall, complete all as specified and directed. (Note : MCBs shall be measured and paid for seperately)

S&F MCB single pole and neutra, 25 to 40 Amp, 'C' series, 10KV, 240 Volts, complete all as specified.

Sheet metal enclosure single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts, complet all as specified,

Wall mounted air circulator fan complete of 250mm sweep, 1400 rmp duly mounted on wall with and including provn of nuts, bolts and washers, ssize of the bolt 15cm long 12mm dia includig provisioning of three core flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to fan for connection, complete all as specified and directed.

S&F 45 Watt, Security light luminaries comprising of Die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lume output >100 Lum/watt, lumen maintaenance > 70% at 50000 hrs, color temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 60598-1, IEC-61000-3-2, IEC 61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of suitable dia light grade, bend to shape at an angle of 65 degree not less than 1.2 mtr long with 2 Nos of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections with twin core twisted copper conductor flexible copper wire of suitable size from street light to juction specified and as directed.

Submain wiring with 2 x 4 sqmm single core PVC insulated unsheathed FRLS flexible copper conductor cable and 1 x 4 sqmm single core PVC insulated unsheathed (FRLS) flexible copper conductor cable of size 4 sqmm as earth lead in and including conealed PVC conduit, ISI marked and making good the disturbed surface complete all as specified and as directed. (Note: Two runs of 4 sqmm cable, one run of 2.5 sqmm earth wire and PVC conduit all one RM lenght each shall be measured as one unit of one Running Metre)

Submain wiring with 2 x 6 sqmm single core PVC insulated unsheathed FRLS flexible copper conductor cable and 1 x 4 sqmm single core PVC insulated unsheathed (FRLS) flexible copper conductor cable of size 6 sqmm as earth lead in and including conealed PVC conduit, ISI marked and making good the disturbed surface complete all as specified and as directed. (Note: Two runs of 6 sqmm cable, one run of 4 sqmm earth wire and PVC conduit all one RM lenght each shall be measured as one unit of one Running Metre)

Supply and fix exhaust fan made of sturdy Engineering plastic complet with louvers shutter, voltage 23V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm

S&F LED bulb, B22 base, 9/10 watt, lumen output> 90Lum/W, CRI> 70, 5700-6500K color temp, PF>0.9, THD< 20% suitable for lamp holder complete all as specified and directed.

AYUSH CONSTRUCTION COMPANY (BID ID -3158946)

Alankar Traders (BID ID -3158635)

M/s Ruchi Rabh associates (BID ID -3158834)

ACE BUILDERS AND CONTRACTORS (BID ID -3164447)

MOHAN LAL GUPTA (BID ID -3159252)