GENERAL-Restructuring of Inland Navigation Offices in Varkala-Restructuring of

Amount

Restructuring

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

OD157/2023-2024:Providing and fixing 2mm thick ACP sheet as panelling for aluminium framed doors, windows shutters and partition frame with C.P brass/ stainless steel screws etc. complete as per directions of engineer in charge (all labour and material charges inclusive)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.12.1:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Anodized (AC 15) aluminium tubular handle bar

21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

OD158/2023-2024:Providing and fixing of hydraulic door closer on the aluminium door with all necessary accessories, screws and labour etc complete as per the direction of engineer in charge

OD159/2023-2024:Providing and fixing of hydraulic door closer for half door on the aluminium door with all necessary accessories, screws and labour etc complete as per the direction of engineer in charge

OD1099/2023-2024:Purchase and supply of good quality cushion type steel chair with handle

OD166/2023-2024:Engaging carpenter class II for miscellaneous work as per the direction of engineer at site

OD257/2023-2024:Engaging an electrician for executing electrical works as per the direction of departmental officers

OD258/2023-2024:Purchase and supply of good quality ISI marked call bell- single phase and modular bell push switch

OD259/2023-2024:Purchase and supply of good quality PVC conduits for concealing electrical wires

OD260/2023-2024:Purchase and supply of good quality PVC bends for concealing electrical wires

OD261/2023-2024:Purchase and supply of staples/saddles for fixing of PVC conduits including screws and other fixing accessories

OD262/2023-2024:Purchase and supply of good quality ISI marked PVC box for fixing electrical accessories

OD263/2023-2024:Purchase and supply of good quality ISI marked single phase one way modular switch

OD264/2023-2024:Purchase and supply of good quality ISI marked Fan regulator (2 module)

OD265/2023-2024:Purchase and supply of good quality ISI marked 3-pin socket outlet

OD266/2023-2024:Purchase and supply of good quality ISI marked PVC insulated copper conductor wires

OD268/2023-2024:Purchase and supply of good quality ISI marked distribution tap-off box and other required accessories for fixing of the same complete

OD269/2023-2024:Purchase and supply of good quality ISI marked RCCB and other required accessories for fixing of the same complete

OD270/2023-2024:Purchase and supply of good quality ISI marked MCB other required accessories for fixing of the same complete

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

14.44:Distempering with dry distemper of approved brand and manufacture ( one or more coats ) and of required shade on old work to give an even shade.

14.42.2:White washing with lime to give an even shade:Old work (one or more coats)

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

OD9664/2023-2024:Purchase and supply of good quality 1kv invertor with battery

OD9667/2023-2024:Purchase and supply of new good quality executive style revolving chair with highback for use in subdivision

OD9671/2023-2024:Supply and installation of qood quality EPBX having 6 lines and 5 landphones

OD9674/2023-2024:Purchase and supply of new good quality computer table

OD9675/2023-2024:Purchase and supply of extension board with two 3 pin sockets and 2 switches with cable of 3m length

OD9676/2023-2024:Supply of labour for cleaning office and campus

JAYACHANDRAN D

Bidder Name

KUNNATH CONSTRUCTIONS

JAYACHANDRAN D