REPAIR TO ROOF FALSE CEILING SHEETING WATER PROOFING PLASTER TILING PLINTH PROTECTION SANITARY FITTING AND JOINERY WORK ETC OF MD AND OTM ACCN IN ODTD UNDER AGE BR WEST AT GE DEHU ROAD

Amount

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A complete all as specified and as directed.

S & F 0.50mm thick pre painted/coloured galvalume zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

All as per item No. 4 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed.

Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

S & F 12mm thick Gypsum board for ceiling, insulation and accoustic purpose 60x60cm in size fixed with screws with staples incl aluminium snap grid frame work 605x605 mm in flat/sloping ceiling with aluminium anodised grid work 35.60x23.60x1.60mm main Tee 23.60x23.60x1.60mm cross Tee and 26x26x1.60mm angle including 3mm dia GI wire suspender of suitable length aluminium cleats etc complete all as specified and directed.

Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MD land complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction, as levelling course including filling depressions if any, to receive water proofing treatment (WPC shall be measured & paid seperately) complete all as specified and as directed.

Supply only Liquid water proofing compound .

M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) n exc. 1.5 Sqm each

Taking down shutters of any description exc 1 sqm and n exc 2 sq. m each

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F aluminum powder coated sliding type window shutter for three track window with aluminum section weighing not less than 0.55 Kg per RM, two shutters with and including 4 mm thick sheet glass and one shutter with stainless steel wire gauze 0.36 mm nominal dia and 1.4 mm width of apperture including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles, etc complete all as specified and as directed by Engr-in-charge .(Note:- Frame shall be measured seperately)

S & F aluminum powder coated frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

M&L for Flush shutter 30 mm thick, solid core construction, with block board core & ply wood face panels commercial type on both sides

S&F Butt Hinges medium weight cold rolled mild steel 100 mm long complete .

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L for Rendering 5 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls on plastered surfaces complete.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

S& F in repairs sink made of stainless steel 1 mm thick, kitchen, plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size with drainage board 915x460mm bowl size 410x330x160mm complete all as specified and as directed of make SILVER SHINE, NIRALI PRAYAG

S&F in repair plate rack made of stainless steel 1 mm thick overall size 24"x36''x10'' all as directed (SILVER SHINE CAT PART No SSKPR-312)

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing, removing rubbish off the premises.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as direced.

M&L for vitrified coloured tiles 10mm thick Light shade (square/rectangular) polished area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and as directed.

Ditto as per item No 38 above but on skirting over and including 10 mm th rendering in CM 1:4 complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment including 25 mm thick sand cushion complete all as specified and as directed.

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.

M/L for providing two coat of ShaliCryl 215 UV resistant elastomeric Anti carbonation exterior acrylic water proofing coating including preparation od surface by removing all loose and foreign material, filling cracks/ voids/undulations and applying primer all as per manufacturer's instructions

Samyak Engineers

H S TAKHI

Star Construction

DR J S CHADHA AND SONS

RAMESH PATIL

M/S B.A. GAIKWAD

S RESHAMSINGH AND SONS