Repairs and renovation to bldg No.929 (Cultural hall) at Cordite Factory Estate.

Amount

M&L for Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (Mat finish tiles of size 60cm X 60cm as approved by EIC to be used).

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, CM 1:4.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded in any mortar as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, Broken stone, watered and rammed to a true surface as directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 70mm as directed.

Rendering in CM 1:4, 12mm thick including Setting coat 3mm thick in CM 1:2, trowelled to even and smooth finish as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm including rough excavation and taking earth from the lead of 250m to 500m as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar for portions ordered to be demolished. (for refixing the door at higher level).

M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. for use as Lintel for doors as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, 1:3:6 mix ratio, exc. 10 cm in width and setting in Cement mortar 1:4, complete as directed.

RCC 1:2:4, using 20mm graded aggregate, stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed.

M&L for Formwork to staircases with sloping or stepped soffits including risers and stringers as directed.

M&L for Rendering 12mm thick on fair faces of concrete ceiling surfaces as directed.

M&L for Rendering 12mm thick on fair faces of brick or concrete wall surfaces as directed.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and applying Putty of 3mm thick wall care putty on gypsum board ceiling as directed.

M&L for fixing of Linoleum flooring, 3.20mm to 3.30mm thick in floors including stretching, cutting and fitting as directed.

Taking down and refixing of Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab / staircase with suitable arrangement, all as directed and as approved.

Supply and Fixing of open wiring in PVC heavy duty conduit (minimum 20 mm dia) ISI marked including all accessories with PVC insulated FRLS copper stranded conductor cables of size 1.5 sqmm 1100 V gradeor ech one light point or one fan point or bell point etc controlled by one MCB as directed by Site In charge.

Supply and Fixing of wiring circuit/submain wiring in steel conduit along with earth wire (2x4.0 sqmm + 1x2.5 sq.mm earth wire) FRLS PVC insulated copper conductor, single core cable in surface as required as directed by Site Incharge.

Supply and Fixing 240V,10KA 'B' curve miniature circuit breaker (MCB) of Single poles and Neutral current carrying capacity 32 A, in the MCB DB Complete with connection testing and commissioning as directed by site in Charge

Supply and Fixing 240V,10KA 'B' curve miniature circuit breaker (MCB) of Single poles and Neutral current carrying capacity 6 A, in the MCB DB Complete with connection testing and commissioning as directed by site in Charge

S& F 16 Way 240V double Door SPN MCB DB( Sheet metal encloser) as directed by Site In charge.

S&F of LED light Named "Exit"red colour in Black Back ground 5-10 watts 230V AC with fixing arrangement as directed by site In charge

S&F of Warm white LED down Light 3 module ( Foot light) 230 V AC with fixing arrangement as directed by Site Incharge. Make : Lucker,Philips,Wipro,ACE etc.

S&F of LED Fall Sealing Light 24 Watts 230 V AC Type Square Cool day light with fixing arrangement as directed by Site In charge Make : Lucker, Philips, Wipro, ACE etc..

JAYPEE ENTERPRISES

RAVIKUMAR

ACE PROMOTERS