Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC PREM SAROVAR HOTEL NAINITAL 263 001 UTTARAKHAND | NAINITAL | UTTARAKHAND | 263001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹39.8 L+₹3.9 L (10.8%)Rejected-Finance 66 C O J R NAICKER ASWATHNAGAR SANJAYNAGAR P O BANGALORE 560 094 | BENGALURU URBAN | KARNATAKA | 560094 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹40.0 L+₹4.0 L (11.2%)Rejected-Finance B 497 S F MEERA BAGH PASCHIM VIHAR NEW DELHI 110063 | WEST DELHI | DELHI | 110063 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹43.2 L+₹7.2 L (20.1%)Rejected-Finance 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹43.7 L+₹7.7 L (21.5%)Rejected-Finance PANDEY BANK THE MALL ROAD RANIKHET DISTRICT ALMORA UTTARAKHAND 263645 | RANIKHET | ALMORA | UTTARAKHAND | 263645 | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | Shikhar ji Enterprises L4 | SATISH KUMAR SINGH L5 | Ramsons L1 | aditya construction L7 | OM SAI ASSOCIATES AND DEVELOPERS L8 | SIDDHIDATRI CONSTRUCTION L6 | om enterprises L2 | Pushkar Dutt Bhatt L9 | SARVJEET ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repairs to pot holes of depth not exc. 1 Sqm each including sweeping free from dust and mud or water,scoring sunken surfaces in roads,paths etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with paving bitumen of VG-10 at the rate of 5 kg/ 10 sqm and laying bituminous premixed carpet 25mm thick(consolidated thickness) with 0.34 cum of stone chipping mixed with 18.25 kg of paving bitumen of VG-30,rolled and compacted to required camber and gradient and applying premixed sand seal coat with 0.06 cum of sand mixed with 6.80 kg of paving bitumen of VG-30 applied and rolled to uniform and smooth surfaces with 8 to 12 tonne power roller complete all as specified and directed. | 10 | Ten sqm | 2,500 ₹25,000 | 8,000 ₹80,000 | 4,000 ₹40,000 | 5,000 ₹50,000 | 5,000 ₹50,000 | 5,000 ₹50,000 | 5,000 ₹50,000 | 6,500 ₹65,000 | 1,900 ₹19,000 Lowest |
| 2.00 | Demolition of Cement Concrete (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level) and removal n exc 100 m complete all as specified and directed. | 25.65 | Cum | 250 ₹6,412.5 | 200 ₹5,130 | 250 ₹6,412.5 | 100 ₹2,565 Lowest | 150 ₹3,847.5 | 400 ₹10,260 | 200 ₹5,130 | 1,200 ₹30,780 | 190 ₹4,873.5 |
| 3.00 | M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. | 190 | Sqm | 300 ₹57,000 | 190 ₹36,100 Lowest | 290 ₹55,100 | 400 ₹76,000 | 300 ₹57,000 | 500 ₹95,000 | 300 ₹57,000 | 400 ₹76,000 | 190 ₹36,100 Lowest |
| 4.00 | M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. | 190 | Sqm | 1,800 ₹3,42,000 | 1,400 ₹2,66,000 | 1,350 ₹2,56,500 | 1,250 ₹2,37,500 | 1,200 ₹2,28,000 | 2,000 ₹3,80,000 | 900 ₹1,71,000 Lowest | 1,150 ₹2,18,500 | 999 ₹1,89,810 |
| 5.00 | Demolition of brickwork or stone/ boulders, masonary built in cement mortar including all quoins, arches,pillars,etc. but excluding ashlar facings, dressed stone works & precast concrete surfaces complete all as specified and directed. | 150 | Cum | 250 ₹37,500 | 200 ₹30,000 | 250 ₹37,500 | 200 ₹30,000 | 150 ₹22,500 | 400 ₹60,000 | 150 ₹22,500 | 1,700 ₹2,55,000 | 90 ₹13,500 Lowest |
| 6.00 | M&L for stone walling of random rubble stone masonary, uncoursed, well bonded, bedded & solidly hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed | 90 | Cum | 6,800 ₹6,12,000 | 6,200 ₹5,58,000 | 3,800 ₹3,42,000 Lowest | 7,500 ₹6,75,000 | 6,500 ₹5,85,000 | 4,000 ₹3,60,000 | 4,000 ₹3,60,000 | 10,000 ₹9,00,000 | 5,490 ₹4,94,100 |
| 7.00 | All as per item No. 6 above but except stone (stone shall be obtained from demolition all as directed by EIC | 60 | Cum | 3,200 ₹1,92,000 | 3,000 ₹1,80,000 | 2,500 ₹1,50,000 | 2,500 ₹1,50,000 | 3,500 ₹2,10,000 | 1,250 ₹75,000 Lowest | 1,900 ₹1,14,000 | 4,500 ₹2,70,000 | 1,900 ₹1,14,000 |
| 8.00 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR (random rubble) walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed. | 180 | Sqm | 270 ₹48,600 | 170 ₹30,600 | 150 ₹27,000 | 20 ₹3,600 Lowest | 150 ₹27,000 | 60 ₹10,800 | 200 ₹36,000 | 550 ₹99,000 | 190 ₹34,200 |
| 9.00 | M&L for flush pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. | 18 | Ten Sqm | 240 ₹4,320 Lowest | 670 ₹12,060 | 1,500 ₹27,000 | 2,000 ₹36,000 | 1,500 ₹27,000 | 1,500 ₹27,000 | 900 ₹16,200 | 3,000 ₹54,000 | 2,900 ₹52,200 |
| 10.00 | Removing mortar from and cleaning stones obtained from stone masonry of any description (except ashlar facings and dressed stone work); stacking for measurement including all extra handling complete all as specified and directed by EIC.(Unit of measurement : per cum of cleaned stone) | 60 | CUM | 500 ₹30,000 | 300 ₹18,000 | 500 ₹30,000 | 250 ₹15,000 | 200 ₹12,000 | 500 ₹30,000 | 200 ₹12,000 | 4,500 ₹2,70,000 | 90 ₹5,400 Lowest |
Tender Value
₹58 L
EMD Value
₹1.1 L
Closing Date
15 Oct 2025, 6:00 pmClosed
CWE (AF) BAREILLY
HQ Commander Works Engineers AF Military Engineer Services Bareilly 243002
As described in BOQ
2025_MES_731683_1
81556/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
AGE (I) (AF) BHOWALI
As per NIT
9 documents required · 9 mandatory
₹1,000
AGE (I) (AF) BHOWALI
₹1.1 L
9 Dec 2025
19 Sept 2025
23 Oct 2025
19 Sept 2025
15 Oct 2025
3 Oct 2025
Amount
Repairs to pot holes of depth not exc. 1 Sqm each including sweeping free from dust and mud or water,scoring sunken surfaces in roads,paths etc. cutting around edges to at least 25mm in depth, making good by applying tack coat with paving bitumen of VG-10 at the rate of 5 kg/ 10 sqm and laying bituminous premixed carpet 25mm thick(consolidated thickness) with 0.34 cum of stone chipping mixed with 18.25 kg of paving bitumen of VG-30,rolled and compacted to required camber and gradient and applying premixed sand seal coat with 0.06 cum of sand mixed with 6.80 kg of paving bitumen of VG-30 applied and rolled to uniform and smooth surfaces with 8 to 12 tonne power roller complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level) and removal n exc 100 m complete all as specified and directed.
M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
Demolition of brickwork or stone/ boulders, masonary built in cement mortar including all quoins, arches,pillars,etc. but excluding ashlar facings, dressed stone works & precast concrete surfaces complete all as specified and directed.
M&L for stone walling of random rubble stone masonary, uncoursed, well bonded, bedded & solidly hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed
All as per item No. 6 above but except stone (stone shall be obtained from demolition all as directed by EIC
Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR (random rubble) walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed.
M&L for flush pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.
Removing mortar from and cleaning stones obtained from stone masonry of any description (except ashlar facings and dressed stone work); stacking for measurement including all extra handling complete all as specified and directed by EIC.(Unit of measurement : per cum of cleaned stone)
Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones,mile stone, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match, complete all as specified and directed.
S & F in replacement of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.
S & F in replacement of metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.
Manufacturing, supplying and fixing in repair Retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge complete all as specified and directed.
M&L for preparing old/new black top surface of road and applying evenly a coat of reflective thermoplastic road marking paint 2 mm thick (white or yellow) for longer durabililty and material shall be conforming to MOST (Ministry of Surface Transport) specification with special applicator machine all as per manufacturer's instructions complete all as specified and as directed.
M&L for preparation of newly plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge.
M & L for writing letters or figures (Block,Roman, Italic or Indian) not exc. 30 cm high including obliterating old writing of any description n.exc 0.2 sqm with complete all as specified such as 1 KM, NP-02, P-101, MAP-101, O-2/104 etc. complete all as specified and directed.
Removing excavated material (rock) / material are presently available on roadside due to natural landslide to a distance exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as directed.
S & F in replacement SGS circular convex type with high quality acrylic of polycarbonate ( scratch resistant and unbreakable) security mirror (1mtr dia), including earthwork, PCC in foundation, post of MS pipe 50mm dia, clamps, nuts & bolts etc. complete all as specified and directed. Note : SGS circular mirror shall be of 1st quality & ISI marked.
NOTE:-Works shall be executed at LKT and Adm site as per directed by Engr-in-Charge.
om enterprises (BID ID -3443530)
SARVJEET ENTERPRISES (BID ID -3451651)
Shikhar ji Enterprises (BID ID -3445166)
SATISH KUMAR SINGH (BID ID -3445241)
SIDDHIDATRI CONSTRUCTION (BID ID -3446072)
aditya construction (BID ID -3450205)
OM SAI ASSOCIATES AND DEVELOPERS (BID ID -3445949)
Pushkar Dutt Bhatt (BID ID -3451297)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .