Finishing works for the QC lab and Office Rooms in TM#5 area at TNPL Unit II

THOROUGHLY PREPARE SURFACES OF THE FLOOR, SUPPLY AND LAYING OF TILES 4' X 2' DOUBLE CHARGED VITRIFIED TILES WITH SPACER JOINT OVER THE FLOOR OF APPROVED SHADE AND COLOUR WITH BED MORTAR IN CM 1:3 WITHOUT ANY WAVINESS FOR FLOORS AND SKIRTING AND GROUTING WITH APPROVED TILE GROUT OF MAKE (BOSTIK / MYK LATICRETE / WEBER) CURING ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF ONE SIDE POLISHED GRANITE SLAB 16MM THICK OF APPROVED COLOUR AND FIX IN POSITION OVER CEMENT SLAB IN CM 1:3, 12 MM THICK AND POINTING THE JOINTS FREE WITH TILE MATT COMPOUND, NOSING OF EDGES, CURING ETC., COMPLETE AS DIRECTED BY ENGINEER IN CHARGE.

BRICK MASONRY WITH APPROVED QUALITY CHAMBER BURNT BRICKS / FLY ASH BRICKS IN HALF BRICK THICK WALL IN CM 1:4 INCLUDING PLASTERING IN CM 1:4, 12MM THICK BOTH SIDES AND SCAFFOLDING, CURING ETC., AT ALL LEVELS.

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +7.00 MTR

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR 1:4, 12MM THICK AT ALL LEVELS INCLUDING NECESSARY SCAFFOLDINGS AND CURING ETC., COMPLETE.

CEMENT CONCRETE M30 USING 20MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE ABOVE FFL TO +7 MTR LEVEL.

TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS.

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD FOR ALL TYPES OF SHUTTERING WORKS LIKE COLUMN, BEAM, SUNSHADE, SHELL WALL, ROOF SLAB, STAIRCASE, ETC., AS "PLASTER FREE FINISH" ABOVE FFL TO +7 MTR LEVEL.

THROUGHLY PREPARE THE SURFACES AND APPLY ONE COAT OF WALL PRIMER OF APPROVED MAKE OVER WALL PUTTY SURFACES AND APPLY TWO COATS OF ACRYLIC EMULSION IST QUALITY OF APPROVED COLOUR AND MAKE INCLUDING MATERIAL COST AND ALL CONSUMABLES LABOUR CHARGES, SCAFFOLDING ETC. COMPLETE AT ALL LEVELS.

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (BOUSH MAKE -MODEL NO.11E) WITH LABOUR FOR DISMANTLING OF COCNRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

SUPPLY OF SS SINK OF SIZE 550 L X 450 W X 200 H MM OF SS 304 GRADE INCLUDING 2 NUMBERS OF PILLAR COCK, 40 MM WASTE WATER PIPE WITH COUPLING AND CP GRATING ETC., COMPLETE AS PER THE INSTRUCTIONS OF ENGINEER IN CHARGE.

PROVIDING AND FIXING OF 15 MM SIZE CP BIBCOCK OF METRO OR EQUIVALENT APPROVED MAKE.

SUPPLY OF 25MM DIA THREADED U.PVC PIPE 40 SH OF FINOLEX MAKE AND LAYING IN POSITION INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING INCLUDING NECESSARY EARTH WORK IN CASE OF UNDER GROUND LINE AND CONCEALING WORKS WHEREVER REQUIRED ETC., COMPLETE.

SUPPLY OF 63MM DIA FINOLEX MAKE PVC PIPE OF PRESSURE 6KG/CM2 INCLUDING ALL NECESSARY SPECIALS LIKE BEND, TEE, COUPLING, ELBOW ETC., AND LAYING USING PVC SOLVENT WITH NECESSARY EXCAVATION UPTO TO A DEPTH OF 3 FEET, BACKFILLING, LEVELLING, TESTING ETC., COMPLETE AS PER THE INSTRUCTIONS OF ENGINEER IN CHARGE

PROVIDING AND FIXING OF SINTAX TANK OF 1000 LITRES CAPACITY WITH NECESSARY LID, OVER FLOW FITTINGS ETC., COMPLETE AT ALL LEVELS AS DIRECTED BY ENGINEER INCHARGE

SUPPLY AND FIXING OF CUP-BOARD SHUTTER WITH FRAME USING TERMITE / WATER PROOF PLYWOOD OF 18MM THICK OVER WHICH LAMINATED SHEET OF 1MM THICK FIXED INSIDE AND OUTSIDE OF THE SHUTTER USING FEVICOL ALONG WITH NECESSARY GLASS WORK, FURNITURE FITTINGS, SUCH AS, HYDRALIC HINGES, TOWER BOLT, HANDLES, MULTI PURPOSE LOCKS ETC., AS PER DRAWING AND AS DIRECTED BY THE ENGINEER IN CHARGE.

SUPPLY AND INSTALLATION OF A BOX-TYPE WARDROBE WITH OPEN SHUTTERS MADE FROM 19MM THICK TERMITE- AND WATER-RESISTANT PLYWOOD (BWP IS 710 GRADES). THE BACKDROP SHALL BE MADE WITH 8MM THICK TERMITE- AND WATER-RESISTANT PLYWOOD (BWP IS 710 GRADES). ALL THE SHUTTERS WILL BE LAMINATED INSIDE AND OUT WITH A 1MM GLOSSY OR MATTE SHEET. THE WORK INCLUDES DRAWER UNITS, GLASS WORK, AND HARDWARE FITTINGS LIKE HYDRAULIC SS HINGES, 6" SS TOWER BOLTS, 8" SS HANDLES, SS HANGER RODS, AND MULTI-PURPOSE LOCKS, AS PER THE DESIGN AND INSTRUCTIONS FROM THE ENGINEER-IN-CHARGE. ALL EDGES WILL BE SEALED WITH MATCHING LAMINATED EDGE BANDING.

PROVIDING AND FIXING OF 20MM THICK PRE- POLISHED GRANITE SLAB STRIPS OF HEIGHT 75MM IN SKIRTING, FIXED IN FLUSH WITH PLASTERED WALL SURFACE OVER A BACKING COAT OF 12MM THICK CM 1:4 SET IN CEMENT PASTE, JOINTS/GROOVES NEATLY FILLED AND FINISHED WITH WHITE CEMENT/BAL GROUT MIXED WITH COLOURING PIGMENT TO MATCH THE SHADE/COLOUR OF THE SLAB, INCLUDING CUTTING, LAYING TO THE REQUIRED PATTERN, TREATING THE EXPOSED EDGES/NOSING AS IN THE DRAWING, ACID WASHING, CLEANING, WAXING, CURING, CHAMFERING ETC COMPLETE ALL AS PER SPECIFICATIONS, DRAWING & DIRECTION.

Please Enable Macros to View BoQ information