PROVISION OF SWIMMING POOL AT INS SARDAR PATEL PORBANDAR

Amount

Total amount of Sch 'A' Part-I (BUILDINGS & STRUCTURES) brought forward from Serial Page No. 26(R)

Total amount of Sch 'A' Part-II ( EXCAVATION , EARTH WORK & SITE CLEARANCE ) brought forward from Serial Page No. 28(RR)

Total amount of Sch 'A' Part-III (INTERNAL WATER SUPPLY & HOT WATER SUPPLY ) brought forward from Serial Page No.29

Total amount of Sch 'A' Part-IV ( INTERNAL ELECTRIFICATION ) brought forward from Serial Page No.32

Total amount of Sch 'A' Part-V ( SEWAGE DISPOSAL )brought forward from Serial Page No 34(RR)

Total amount of Sch 'A' Part-VI ( AREA DRAINAGE ) brought forward from Serial Page No.35(RR)

Total amount of Sch 'A' Part-VII ( EXTERNAL WATER SUPPLY ) brought forward from Serial Page No. 36(R)

Total amount of Sch 'A' Part-VIII (EXTERNAL ELECTRIFICATION) brought forward from Serial Page No. 39(R)

Total amount of Sch 'A' Part-IX ( ROAD, PATH & CULVERT ) brought forward from Serial Page No 42(RR)

Total amount of Sch 'A' Part-X ( COMPOUND WALL ) brought forward from Serial Page No 44(RR)

Sch 'A' Part- XI - MISCELLANEOUS ITEMS (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.-5 signifies this fact only.)

INTERNAL WATER SUPPLY :- S&F 15 mm dia stainless steel angular stop cock,quarter turn with wall flange Make - Jaquar Model No CQT-23059 or equivalent in Crab Tree/Kohler brand as approved.

S&F 15 mm dia stainless steel concealed stop cock,regular body with adjustable wall flange Make - Jaquar Model No CQT-23089 or equivalent in Crab Tree/Kohler brand as approved.

S&F Over head Shower 120 dia with wall mounted shower arm Make - Jaquar Model No OHS-1789&SHA-477 or equivalent model in Crab Tree/Kohler brand as approved.

S&F 15 mm dia stainless steel health faucet with flexible pipe ( ABS body ) with 1 mtr long PVC tube and wall hook Make - Jaquar Model No ALD- CHR-583 or equivalent model in Crab Tree/Kohler brand as approved.

S&F 15 mm dia stainless steel two way Bib cock (heavy duty ) Make- Jaquar Model No CQT- 23041 or equivalent model in Crab Tree/Kohler brand as approved.

S&F centre hole basin mixer all as specified. Make - Jaquar Model No CQT -23167B or equivalent model in Crab Tree/Kohler brand as approved.

S&F 15 mm dia bib taps (Heavy duty) fancy type chromium plated all as specified. Make- Jaquar Model No CON 107 KN or equivalent model in Crab Tree/Kohler brand as approved.

S&F PVC connection 450 mm long braided hose with 02 nos 15 mm nuts and rubber washer without nipple ( suitable for geyser) all as specified. Make- Jaquar Model No ALD- 805 B or equivalent model in Crab Tree/Kohler brand as approved.

INTERNAL ELECTRIFICATION

S & F modular type 1 module RJ 11 telephone socket with shutter [Make: Legrand: 5734 26 or equivalent in Anchor as approved]

S & F modular type 1 module TV socket [Make: Legrand: 5734 25 or equivalent in Anchor as approved.]

S & F 20 W surface/wall mounted LED batten tubelight, including LED tube/module, with PC diffuser and extruded aluminium anodised housing with LEDs as light source having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.98, CCT 6500K, THD < 10%, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the LED batten fitting complete all as specified and directed. [Make: Wipro/ Philips / Philips]

All as per Item NO 13.03 above but 10 watts and 2ft long

Supply & fix ceiling fans complete with down rod blades canopies and accessories, 230 V, 1200 mm sweep. BEE 5 star rated. [Make: Usha/ Havells /Crompton]

Supply, Installation, Testing and Commissioning of integral driver LED streetlight 36 watts with a nominal system lumen output of 3300 lumens and a minimum system efficacy of 90 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. The luminaire should have cool white colour temperature (CCT>5000K) and a CRI>70. The luminaire shall meet IP66 rating & IK05 cool white colour temperature (CCT>5000K) and a CRI>70. The luminaire shall meet IP66 rating & IK05 rating with THD<20% & Pf>0.9. The luminaire housing should be made of pressure die cast aluminium with a polycarbonate optical cover complete with GI Pipe 40 mm dia light grade ISI marked 1.5 mtr long bent to sgape and fixed with suitable clamps . The total power consumption should not exceed 36W (including driver). Similar to Philips Make GREENLINE "BRP409 LED CW 033 NR PC S1 PSU GR" or equivalent in Wipro / Philips

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, speed not greater than 1760 RPM, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. [Make: Usha/ Havells /Crompton]

Supply & fix metal body exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver make GEC/Almonard/ Havells

S & F ISI marked MCB for AC applications till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters

6- 32 A, SP MCB C- curve ( For light and fans)

6- 32 A, SPN MCB C- curve ( DC light driver panels-2 + SPN DB I/C -2))

6- 32 A, TPN MCB C- curve ( For suction sweeper connection)

Supply and fix 3 phase metal plug and socket with MCT TP , 20 Amps 415V, including metal plug top 3 phse 20 Amps

Supply and fix Mid bay Luminaires 70 watts complete with its fixing arrangemnt as per manufacturers instructions robust and reliable IP-66 and IK 08 protectd LED light fitting,with PDC housing and toughend glass ceiling mounted and available on wide beam Make Philips model Endura ELD Midbay cat no. BY150P LED 76 S CW PSU HE SY 120FG GR LILO or equivqlent in Wipro / Osram ( For Plant Room)

Supply, Installation, Testing and Commissioning of LED integral driver flood light 104 Watts with a nominal system lumen output of 11000 lumens and a minimum system efficacy of 105 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. The luminaire should have cool white colour temperature and a CRI>70. The luminaire shall meet IP66 rating with THD<20% & Pf>0.9. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 104W (including driver). Similar to Philips Make UNIFLOOD "BVP122 LED 110 CW NB FG XTFC" or equivalent in Wipro / Osram ( Spectator gallery)

Supply, Installation, Testing and Commissioning of LED Surface mounted Troffer Luminaire 40 watts capacity with a nomial system lumen output of 3200 lumens and a minimum system efficacy of 80 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 5000K and CRI>70. The luminaire shall meet IP20 rating with THD<10% and PF >0.9. The luminaire housing should made of powder coated metallic CRCA with high efficiency opal diffuser with a flat cover. The total power consumption should not exceed 40W (including driver). Philips Make CIRRUS SURFACE "SM366 LED32 6500 PSU OD GR" or equivalent in Wipro / Osram ( for Porch, entrance verandah and entrance hall)

EXTERNAL WATER SUPPLY

Supply, installation, commissioning of centrifugal pump set, three phase coupled with indus 3 motor,3000 RPM, 5 HP, having minimum 25 m head,and 450 LPM discharge, CI impeller, sealing gland pack, C-40 shaft, GM shaft sleeve, F-class insuallation, IP 55 protection having suitable suction/ delivery pipe of sizes complete all as specified. Make Kirloskar or equivalent in Lubi/CG. (Note : The rate quored shall be inclusive of suitable foundation of pump as per OEM manual)

Supply and fixing weatherproof copper conductor PVC flat cable of 6 sqmm 3 core for connection of pump to starter at panel board.

Supply and fix CI sluice valve 80 mm dia both ends flanged and drilled, with SS spindle , Long body with hand wheel ,Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed MAKE : Kirloskar/Upadhyay/L&T

Supply and fix Non return valve (reflux valve) with with by pass arrangement GM working parts confirming to IS 5312 80mm (3") dia

Supply and fix foot valve with CI body and nitrile rubber ball of size 80 mm complete all as specified and directed MAKE : Kirloskar/Upadhyay/L&T / Normex

Suply, laying & jointing in trenches DI pipes class K-9, 150 mm dia, ISI marked ( IS - 8329- 2000) of standard length spigot and socketed end push type jointed with rubber gasket as jointing material, internal cement mortar coating & external surface with bituminous paint all as specified & directed.

Material and labour for DI specials upto 150 mm dia bore , DI pipes conforming to IS-9523- 2000) complete all as specified & directed.

Supply and fix CI sluice valve 150 mm dia both ends flanged and drilled, with SS spindle , Long body with hand wheel ,Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed MAKE : Kirloskar/Upadhyay/L&T

Supply and fix cast iron Air release valves with air outlets, 25 mm dia bore and fixing up in cast iron water supply mains 150mm dia bore MAKE : Kirloskar/Upadhyay/L&T

Cutting of bituminous road, PCC surface/ floor by using mechanical method or any type without damaging to adjacent area complete all as specified and directed by Engineer in charge.[ 24 RM for Ext Water Supply + 30 RM for Ext Elect]

M & L for Construction of fly-ash brick masonary valve chamber of size 900 mm X 900 mm X 900 mm (internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore , 200 mm thick fly-ash brick masonry walls built in CM 1:6, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in soft rock /hard Dense soil , 6 mm thick MS sheet cover fixed on 40 mm X 40 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil / rock to a distance not exceeding 50 m etc complete all as specified and directed. [ Ext Water Supply - 01 )

M & L for Construction of fly-ash brick masonary valve chamber of size 300 mm X 300 mm X 300 mm (internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore , 200 mm thick fly-ash brick masonry walls built in CM 1:6, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in soft rock /hard Dense soil , 6 mm thick MS sheet cover fixed on 40 mm X 40 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil / rock to a distance not exceeding 50 m etc complete all as specified and directed. [ Ext Water Supply - 01 )

EXTERNAL ELECTRIFICATION

Supply and fixing of outdoor weather proof type IP 65 enclosure FRP junction box of 300mm x200mmx100mm fitted to the pole complete with fixing with GI clamps 25mm x4mm alongwith 6 Amps MCB SP with 200A rated bus bar 4 strips mounted on suitable insulators for terminating incoming and outgoing cables of 10 sqmm 4 core all as specified and directed

Supply, installation, testing and commisioning of step down transformer, hermatically sealed confirming to IS: 1180/ 2014 Outdoor type HT 11 KV, 3 Phase, LT- 433 Volts, 50 HZ, 3 Phase 4 wire, oil cooled, electrolyte grade copper wound in accordance with vector group DYN 11 with neutral brought out on LV side with tapping on HV side to vary secondary voltage upto +_ 7.5 % in steps of 2.5 % with externally operated off load type tap changing switch, locking arrangement & digital winding temprature meter complete with all standard fittings all as specified of capacity 160 KVA confirming with the following Technical specifications : -

(a) Rating : HV- 11 KV, LV- 433 Volts

(b) Winding connections : HV - Delta, LV- Star

(c ) Tapings on HV : +_ 2.5 % total 7.5 % OFF Circuit links

(d) Insulation Class - H

(e) Applicable Standards- IS 1180/ IEC-76

(f) Termination : (i) HV &LV cable box on outside for easy connection

(g) HV and LV cable glands of standard rating

(h) Noise level : Less than 69 db at 1 Mtr

(j) Full load losses : within the permissible as per latest IS

(k) No load losses : within the permissible as per latest IS

(l) Surge Protection

NOTE- i) Contractor shall submit the technical drawings, Constructional drgs, safety features etc for approval of GE (ii) Commissioning test after installation shall also be carried out through SEI for which GE will intimate through proper channel.

S & F for road lighting luminaire LED lights 72 watt IP66 Powder coated pressure die cast aluminium compact High Power LED Street light with heat resistant toughened glass with lens. complete with GI pipe bracket made out of 40 mm dia Light grade GI pipe 1.5 mtr long bent to shape all as directed and complete with Nut bolts clamps etc, Make Philips cat No.BRP410 LED CW 066 NR PC S1 PSU GR/ Wipro/Jaquar

S & F for Flood lighting luminaire LED lights 200 watt IP 66 Powder coated pressure die cast aluminium compact High Power LED flood light with heat resistant toughened glass with lens. complete on MS angle iron bracket made out of 50x50x6 mm MS angle iron, 1.5 mtr long all as directed and complete with Nut bolts clamps etc, Make Philips cat No. BVP 410 LED 252 CW HE AK55 FG S3 XTFC/ Wipro/Jaquar

S & F Post top lanterns LED light with die cast housing cum heat sink Make-Philips model BGP161LED2500/NW/PSU 220-240V7043IN or equivalent in Wipro/Jaqaur

M & L for astronomical switch for street lights / Flood lights suitable for 3 Phase, supply complete with suitable rated Contactor and 32 Amps MCCB for protection, in MS enclosure, Make : Indo Asian

Supply, install and commissioning of factory fabricated CPRI approved weather and vermin proof LT panel cubical outdoor type of suitable size made out of 3.15 mm thick MS Sheet and MS angle section 50 x 50 x 6 mm on PCC 1:2:4 type B-1, platform 60 CM above the ground level and 45 CM below the ground level, with front and back openable double door system with and lock openable by keys, having chromium plated fancy locks, louvers and air vent, gasket ‘U’ type for natural flow of air, complete suitable for 3 phase 4 wire 415 volt 50 Hz having modern fabrication followed by minimum seven tank process of cleaning , powder coated painting including making connections and general construction confirming to IS -8623 of 1993 comprising of the following complete all as specified and directed. :-

M & L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth 32 x 6mm GI strip by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt,Earthing lead 32x6 up to 7.5m, 20mm dia medium grade GI watering pipe ,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-2014 (part-I) NOTE-: GI earth strip shell be measured and paid for separately under relevant item of schedule .[ 02 Nos External water supply + 10 Nos External Electrification + 04Nos filteration plant ]

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-2014 (part-I) .[ 02 Nos External water supply + 04 Nos External Electrification + 04 Nos Int Electf ]

Material and labour for cable route indicator made out of cast aluminium duly marked with size and type of cable fixed on 25 x 25 x 3mm angle iron of 45 cm long support embedded in PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate of size 25cm x 25cm x 30cm including painting with two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified & directed.

RO PLANT : Supply and fix Domestic RO Plant Water Purifier of Capacity 40 Ltrs/hr with an inbuilt TDS controller wall mounted with all accessories and installation charges complete Make- Kent, Model-Elite, or equivalent in AO smith / Aqua Guard

WATER COOLER : Supply, installation, commissioning of water cooler fully stainless steel, electric driven single phase having approx storage 80 ltrs and nominal cooling capacity 40 ltrs all as specified and directed. Make : Voltas, Blue Star

Filteration plant for Swimming pool

Supply install test and commisioning of Factory made Vertical cylindrical type multigrade pressure sand filter capacity minimum 175 m3 / hour made from MS sheet suitable for working pressure 3.5 Kg/cm2 duly painted (inner & outer) with red oxide primer and two coats of epoxy paint complete with suitable size of inlet, outlet valves,NRVs, control valves for operation, back wash system incl valve manifold, drain out facilities complete including frontal piping of HDPE/MS suitable sizes pipes for discharge of 175 M3 /hour / pressure rating 10 Kgf/cm2,fittings and filteration rate of less than 10 litres/ sec/ sq mtr, filter media etc as required for smooth functioin and operation all as per manufacturer designed discharge capacity . Note: 1. Rate quoted shall be inclusive of all type & size of UPVC/HDPE/MS frontal piping, control valves connected to the pressure filter and PCC foundation of suitable size as per manufacturers instructions 2. Piping up to pressure filter in-let & beyond out let of pressure filter and drain pipe shall be measured and paid separately- Make- Ion Exchange India Ltd or Equivalent in Thermax / UV rich

Supply, install, test and commisioning of Air Blower with suitable 3 Ph motor IE-2 rated , ISI marked required for filtration unit back wash process of suitable capacity but not less than 200 Cum /Hr , or as recommended by OEM for swimming pool and Diving pool as given in schedules – Make Ion Exchange or equivalent in Everest

Supply install test and commisioning of Water circulation, Horizontal split casing end suction pump 415 V, 50 Hz, 1450 RPM suitable for pressure filter designed discharge capacity 160 m3 / hour @ 25 Mtr head having pump efficiency 65-75%, and suitable for filteration plant as per Sl No 18.01 for ensuring turnover period 7.0 to 8.0 hour with suitable capacity prime mover.The pump shall be of cast iron body, bronze impellar, with mechanical seals, TEFC squirrel cage IE-2 induction motor, M.S. Fabricated base plate, mounting channel frame, accessories and fitting i.e. pressure gauges, Air release valve, drains, coupling, coupling guard, PCC foundation, vibration isolation arrangement complete all as specified in the particular specification. Make Kirloskar or equivalent (02 Working+02 Standby for swimming pool , and 01 working +01 stand by for diving pool)

Supply install test and commisioning of Alum, Dosing pump (venturi drive pump) 0 - 16 LPH with PP/PVC dozing tank capacity 200 Ltr - 2 Nos and piping for in let & out let connection complete with control valves, NRV,metering, electric cabeling & copper wiring through PVC cocealed conduit from Main control panel to booster pump. Make: Ion Exchange or equivalent in thermax / UV rich.

Supply install test and commisioning of Acid/alkali Dosing pump (venturi drive pump) 0 - 16 LPH with PP/PVC dozing tank capacity 200 Ltr with high speed stirrer and piping for in let & out let connection complete with control valves,NRV,electric cabling & copper wiring through PVCconduit from Main control panel to booster pump. Make: Ion Exchange or equivalent in Thermax/ UV Rich

Supply install test and commisioning of Pool drains (drain out sump) - 500 MM X 500 MM – MOC SS 316 Make -, Make Ion exchange/ Thermax/ UV Rich

Supply and install Stainless steel ladders of Swimming pool made out of model stainless steel AISI-304 of width 500 mm with handrails and shall be 40 mm dia of stainless steel with non-slip all as shown on drg and all as dircted by E-in-Charge

Pool ladder 3 steps

Pool ladder 4 steps

Pool ladder 5 steps ( 2 for S/pool and 04 for diving pool)

Supply and install Over flow grating 300 mm x 300 mm wide shall be provided as shown in drawing with slope 1:200, towards shall be provided as shown in drawing with slope 1:200, towards balancing tank including Gratings and support profiles made in white UV stabilized PP of size wide Make:IonExchange/ Thermax / UV rich

Supply install test and commisioning of Trolley mounted suction sweeper with self priming electric driven pump set suitable for cleaning swimming pool capacity ,complete with PVC braided vacuum hose pipe of length minimum 30 Mt, 900 mm size Aluminum / bronze vacuum head, flexible copper cable from Main, PVC floats, wire rope and all connected accessories complete. Make: Ion Exchange (pump & motor:Kirloskar)

S & F 18 inch long Nylon brush Make : Ion Exchange India Ltd

M & L for Telescopic pole 4.8 Mtr long with extendible up 9 Mtr made of aluminum tubing complete Make : Ion Exchange India Ltd

S & F Test Kit for PH & Residual chlorine Make - Ion Exchange India Ltd

TCCA 90- 100 kgs or Hypo liquid for commissioning

M & L for Leaf rack made out of aluminium frame all as per sample make Ion Exchange or equivalent

M & L for Leaf skimmer made out of aluminium frame all as per sample make Ion Exchange or equivalent

Supply install test and commisioning of Ozonator for pool (capacity 31 lakh litre ) disinfection by production of Ozone from atmospheric air with capacity 150 gm/hour comprising with Ozone generating unit, Venture for injection of Ozone in to water main-02 nos( Main pool and diving pool) including their control valves, venture drive / booster pump, air compressor Ozone control unit complete , and all as mentioned in PS clause and as per manufacturer designed capacity. Make Ion exchange or equivalent in Thermax/ UV rich

Supply install test and commisioning of Pool under water integral LED model 14.4 Watt, wall mounted type working on 12 V DC, IP68 complete with built-in driver, including push in connector in 4 pole, flexible conduit and all fixing arrangement in swimming pool wall including and flexible conduit accommodate pool light Make : Ion Exchange/ Thermax/ U V Rich

Supply install test and commisioning ofJunction box of suitable size round/square type with water proof covering made of ABS plastic material.Make Sintex/ Hensel

Supply install test and commisioning of Pool floor inlets (pool jets) 63 mm dia including tail piece of 63 mm dia 20cm long wit pool floor inlets made out of plastic white out of plastic white colour with SS screws suitable for flow rate of 6000 ltr/hr top of floor tiles provided in swimming pool all as per insturction of manufactures and swimming pool designer complete all as specified and directed. Make- Ion Exchange/ Thermax/ U V rich

Supply and install lint hair catcher of size 500x700 mm complete all as directed. Make- Ion Exchange or equivalent make in Thermax / U V rich

Supply installation and testing of Diving board with wooden with FRP covering & Fulcrum with supports of 5 .0 mtr long and 0.5 mtr width, model ION 500 Make – Ion Exchange or equivalent as approved

S & F Racing lane holding hooks - SS 304 -60 MM ID , 10 MM thick rod with bracket . Make – Ion Exchangeor equivalent as approved

S & F Racing lane 50 mt with float – 100 mm of polyster Material Make – Ion Exchange or equivalent as approved.

M & L for Starting block in SS 304 Material Size of platform -500 MM X500 MM with sturdy . base and handle bar for back stroke start -ups , numbered 1 TO 6 and grouted firmly in position in PCC 1:3:6 as directed , wood , laminated in FRP body using Isothelic resin, non skid surface and thickness 2.5 inch to 1.5 inch tappered from one end to other size - 0.5 mt wide. Make – Ion Exchange or equivalent make as approved

Lifebuoy 500 MM Dia - SS Brackete for holding lifebuoy make Ion Exchange / equivalent as approved

Supply install, testing & commissioning of complete piping & valves and system all as shown in schematic & layout drgs and as required essentially for the swimming & diving pools with concealed / open type piping with UPVC pipe and fitting type UPVC schedule 80 of Make Astral / Prince / Supreme / Finolex and ERW MS pipes and fittings, heavy grade, epoxy coated for suction, delivery and pool filtration system and consisting of minimum of the following:-

i) PIPING - UPVC Pipes & fittings - 160 mm, 200,250 and 315 mm dia - 10 KG pressure,with suitable size Butterfly / sluice valves as applicable - ISI marked

ii) Piping MS epoxy coated heavy grade, ISI marked of dia 250 mm for suction lines of six pumps separately with suitable 250 mm dia Foot valves and butterfly valves in each suction, make Kirloskar / Upadhyay / Normex with CI body and synthetic metal ball, strainer etc complete

iii) MS delivery pipes from pump sets 200 mm dia MS epoxy coated heavy duty complete with suitable tailor made special and connected to commn header and 200 mm dia NRV ISI marked -06 nos and PN 1.6 rating sluice valve IS-14846 -06 Nos complete

iv) MS epoxy coated heavy duty common header 300 mm dia for delivery and suction header of suitable length including required MS specials

v) MS pipe heavy duty epoxy coated of 200 mm dia with specials complete from common header to pressure filters incl necessary butter fly valves

vi) Out let UPVC pipes 250 mm dia from pressure filters to swimming pool and diving poo incl suitable MS butterfly valves 250 mm dia of suitable pressure rating of suitable lengths complete-02 nos. ( One for swimming pool + Diving pool)

vii) Concealed UPVC pipes 150 mm dia for outlet nozzles complete with suitable fixing arrangements inside diving pool complete

viii) Concealed UPVC pipes 160 mm dia for outlet nozzles complete with suitable fixing arrangements inside swimming pool complete

ix) Concealed UPVC pipes 315 mm dia for Overflow from Diving pool and Swimming pool ( 2 Runs each) complete upto Balancing tank through lint catcher

x) Concealed UPVC pipes 200 mm dia for drain complete with suitable fixing arrangements inside diving pool and swimming pool and upto common point and 300 mm dia UPVC pipe 10 Kg pressure upto balancing tank with 300 mm dia sluice valve with SS spindle PN 1.6 rating IS-14846 make Kirloskar with Suitable operating rod from Balancing tank top complete all as specified and directed.

xi) MSEP wash out pipe 250 mm dia heavy duty from Pump delivery common header till out side rain / Storm water drain including 300 mm dia sluice valve IS-14846,PN1.0 rating Long body with wheel on top for operation complete.

xii) MSEP wash out pipe 200 mm dia heavy duty-02 nos from pressure filters till out side rain / Storm water drain including 200 mm dia butterfly valve ISI marked with complete.

xiii) Hair strainers -06 nos make Ion Exchange capacity 160 Cum /Hr 'T' type with strainer mesh made out of SS 304 grade

xiv) BLANK

xv) Set of valve manifold for each filter for operation mode in Filter/ Bypass / rinse/back wash/drain mode of 200 mm dia MS butterfly valves of Make Kartar / Kirlokar/ Upadhaya Notes for Sr Item No 18.29 to 18.44:- (a) All UPVC pipe & fittings shall be as per UPVC schedule 80 (b) All MS pipe & fittings shall be heavy grade & epoxy painted. (c) Any relevant item of work concerning pipe & valves not mentioned in this BOQ/schedule or in drg but essentially & technically required for the pool filtrating system of the main and diving pool is deemed to be included in the quoted rate. Nothing extra will be admissible on the count.account at any stage. (d) All civil works including excavation and earthwork to suitable depths as reqd for those items is deemed to be included in the quoted rates. (e) In case of variation in specification / sizes between sch ‘A’ and drgs, the details provided in schematic and layout drgs shall prevail. (f) Tenderer is advised to visit the site and see the schematic & layout plan of pools, balancing tank, pump house etc before quoting rates. Nothing extra will be admissible in case of certain changes are necessiated at site or layout of pools, balancing tank or pump house etc as required as per site / technical requirement during execution of work.

Supply install test and commisioning of Electrical cablling for dosing system , starters of blowers & under water lights consisting of the following

i)Copper wiring of suitable size with Suitable GI Protection pipe for Pump set (approx capacity 30 HP) from starter panel to Motor (6 runs of Copper wire for star delta starters)-06 Jobs

ii)Copper wiring of suitable size for Air blower from starter panel to Motor with Suitable GI protection pipe

iii) FRLS Copper wiring of suitable size with PVC conduits deck level junction boxesmade out of white ABS for under water lights 12 V, DC capacity -50 Nos.incl submain for circuits of suitable sizes from main Panel Room.

iv)Copper wiring of suitable size for dosing pumps from starter panel to dosing Motor with Suitable GI protection pipe

v) Suitable DB's with MCB's and RCBO for under water pool lights

vi) Copper wiring of suitable size from main filteration plant panel to Ozonator panel

vi) Any Internal wiring related to swimming pool and diving pool which is left out but required technically at Site will be provided by the contractor without any extra cost

Fabricate, Supply install test and commissioning of CPRI approved factory fabricated indoor type LT panel board suitable for 440 Volt, 3 phase & Neutral , 50Hz supply , floor mounted weather and vermin proof fabricated from MS angle of size 50x50x5 mm as base frame,with 2 mm thick CRCA sheet (Make -Tata/ sail) ( load bearing members 2 mm thick and non load bearing members such as doors partitions etc of thick ness 1.6 mm thick ), with gland plates at bottom with suitable Brass chromium plated glands, with cadmium plated high tensile nut and bolts washers, suitable barrel copper lugs for cable terminations complete, with locking arrangements complete ,sheets bend, folded, cut with CNC machine for the accuracy of diamensions +/-0.5%, duly powder coated ( after minimum 9 tank porecess of pre chemical treatement)with siemens grey colour , with suitable ventilation ,including LED RYB indicators -06 nos on incoming side and ON/OFF/TRIP indications on outgoing side of Incomer, interconnections from bus bars to MCCB's with suitable size copper bus bars, all internal ckt / protection wiring with FRHR 1100 V grade wiring with MCB protection,including terminal adapters, spreader links on incoming and out going sides of ACB's/ MCCB's complete all as specified and directed and comprising of the following ( for Fileration plant Pump house)

(a) Bus bar Aluminum -300 A capacity- 04 Nos a , high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. .

(b) MCCB four pole 440 V,160 Amp,36 KA , Cat No. DN1-250C, range 125-160 Amps, with thermal and magnetic settings - 01 No ( Incomer)

(c) MCCB three pole 440 V, 50-63 Amp,36 KA , Cat No. DNO100D, range 50-63 Amps, with thermal and magnetic settings - 06 No ( For swimming pool and diving pool motors)

(d) MCCB three pole 440 V, 100 Amp,36 KA , Cat No. DNO125D, range 80-100 Amps, with thermal and magnetic settings - 01No ( For APFC Panel)

(e) MCB three pole 440 V, 6-32 Amp,10 KA - 02 Nos (For ozonatot panel + 1 spare )

(e1) MCB SPN 6-32 Amps, 10 KA C series -04 Nos. ( for dosing pumps)

(f) FASD starter Suitable for centrifugal pump sets -04 No. Each of capacity 30 HP with adjustable over load relay, electronic timer , single phase preventor incl all mounting arrangements make L & T

(f1) FASD starter Suitable for centrifugal pump sets -02 No. Each of capacity 20 HP with adjustable over load relay, electronic timer , single phase preventor incl all mounting arrangements make L & T

(g) FASD starter Suitable for Blower motor -02 No. Each of suitable capacity with adjustable over load relay, electronic timer , single phase preventor incl all mounting arrangements make L & T

h) Motor protection relay for thermal overoad earth fault locked rotor, single phasing current unbalance phase sequence reversal, under current protection for 30 HP pump set -06 Nos Make L & T

j) Digital Ammeter 0-200 amps, accuracy class 1.0 including CTs and - 07 No make L & T model Vega,

(k) Digital Voltmeter(0-500V) accuracy class-1.0 - 01 No, make L & T model Vega,

(l) MCB SPN 20 Amps capacity, 240 V 10 KA , C series -02 No.

(m) MCB SP 06 Amps capacity 240 V 10 KA , C series-03 No.

(n) Multifunction meter 96x96 mm 4410 series, cat No. WL 44100000 make L & T or equivalent make in ABB / siemens-01 no.

Fabricate, Supply install test and commissioning of CPRI approved factory fabricated outdoor type LT panel board suitable for 440 Volt, 3 phase & Neutral , 50Hz supply , floor mounted weather and vermin proof fabricated from MS angle of size 50x50x5 mm as base frame,with 2 mm thick CRCA sheet (Make -Tata/ sail) ( load bearing members 2 mm thick and non load bearing members such as doors partitions etc of thick ness 1.6 mm thick ), with gland plates at bottom with suitable Brass chromium plated glands, with cadmium plated high tensile nut and bolts washers, suitable barrel copper lugs for cable terminations complete, with locking arrangements complete ,sheets bend, folded, cut with CNC machine for the accuracy of diamensions +/-0.5%, duly powder coated ( after minimum 9 tank porecess of pre chemical treatement)with siemens grey colour , with suitable ventilation ,including LED RYB indicators -06 nos on incoming side and ON/OFF/TRIP indications on outgoing side of Incomer, interconnections from bus bars to MCCB's with suitable size copper bus bars, all internal ckt / protection wiring with FRHR 1100 V grade wiring with MCB protection,including terminal adapters, spreader links on incoming and out going sides of ACB's/ MCCB's complete all as specified and directed and comprising of the following ( for swimming pool under water lights and Flood lights, suction sweeper etc)

(a) Bus bar Aluminum -200 A capacity- 04 Nos a , high conductivity, suitable for 415 V, 50 Hz supply including interconnection from incoming, and out going feeders with suitable mounting insulators, heat shrinkable colour sleeves. .

(b) MCCB four pole 440 V, 100 Amp,25 KA , Cat No. DNO-100C, range 80-100 Amps, with thermal and magnetic settings - 01 No ( Incomer)

(c) MCCB 4 pole 440 V, 32-40 Amp,25KA , Cat No. DNO100C, range 32-40 Amps, with thermal and magnetic settings - 02 No ( For Flood light light 2 Ckts)

(d) MCB TPN 440 V, 32 Amp,10 KA - 01 No

(e) MCB SPN 240 V, 20 Amp,10 KA - 02 No

(f) MCB SP 240 V, 10 Amp,10 KA - 02 No

(g) Industial socket 3 phase 32 amps suitable for 415V, 50 Hz supply-02 nos ( for suction sweeper)

Fabricate, Supply install test and commissioning of CPRI approved indoor type APFC panel board , suitable for 440 Volt, 3 phase & Neutral , 50Hz supply ,IP-42 Deg of protection , floor mounted weather and vermin proof, factory fabricated with 2 mm thick CRCA sheet (Make -Tata/ sail) ( load bearing members 2 mm thick and non load bearing members such as doors partitions etc of thick ness 1.6 mm thick ), with gland plates at bottom with suitable Brass chromium plated glands, with cadmium plated high tensile nut and bolts washers, suitable barrel copper lugs for cable terminations complete, with locking arrangements ,sheets bend, folded, cut with CNC machine for the accuracy of diamensions +/-0.5%, duly powder coated with siemens grey colour after chemical treatment with not less than 09 tank process, with suitable ventilation fan at the top ,including LED RYB indicators -06 nos on incoming side and for ON/OFF/TRIP indications on outgoing side of breaker, interconnections from bus bars to ACB's / MCCB's with suitable size copper bus bars, all internal ckt / protection wiring with suitable size FRHR 1100 V grade wiring with 2.5 sqmm and MCB protection with suiatbel rating and 10 KA breaking capacity,including terminal adapters, spreader links on incoming and out going sides of ACB's/ MCCB's, complete, operations incl Auto manual facility for each bank, with bank ON/OFF indication for each bank incl all internal wiring, CT's , Protection devices, MCBs protection for metering, CT's, PT's Relays contactors, HRC fuses , indication lamp ckts etc with Capacitors of capacity 25 KVAR ( 5,5,5,10,), all as specified and directed and comprising of the following (APFC Panel )

(a) MCCB four pole 440 V, 63 Amp 25 KA with thermal and magnetic settings, ,all as per IS-/IEC-60947-2, -01 No ( As Incomer)

(b) Copper Bus Bar of rating 200 amps -04 Nos. on Epoxy insulators incl colour coded heat shrinkable sleeves.

(e) Microproccessor controlled intelligent APFC relay 6 stage,

f) Capacitor duty contactors of suitable capacities for switching capacitors Make- L & T)

g) capacitors heavy duty of capacity 5 KVAR-03, 10 KVAR-01

Note- i) All CT's PT's meters etc of Accuracy class-I

ii) All signalling shall be microprocessor controlled digital processing logic capable of measurements of KVAR of every cycle of the main wave form.

iii) Current input 1A/5A for load and capacitor feed back with measurement accuracy +/-1%

iv)Capacitors MPP heavy duty suitable for 3 ph 440 Volts supply,Box resin filled IS-13585/ IEC-60931 suiatble for 50 Hz , total watt loss less than or equial to 0.35 w / KVAr,suiatble for switching operations more than or equal to 8000 per year, operating life-150000 hrs.with suitable earthing terminals on both sides.

v) Full load testing of each step,and total operation loss shall be less than 15W / KVAr.

M & L Hot dip galvanised Iron octagonal pole of height 6 mtrs minimum galvanising of 70 microns, top 70 mm , bottom 130 mm and 3 mm sheet thickness in single section without any weld joints with square plate of minimum dimensions 225x225x12 mm foundation bolts, single arm medium grade GI bracket medium grade of 900-1000 mm with dia 30-50 mm as required for mounting the light fitting at an angle of 120 degree,backelite sheet with one 6 A SP MCB and 16 mm stud type connectors -04 nos inside the pole at the door opening for cable connections,common template s minimum 01 for each 15 poles all fixed and bolted on and incl suitable PCC pedestal as per manufacturers recommendations and specifications all as directed .Mast and pole shaft shall be be as per BSEN 10025,IS 5986, ASTM A572 , Foundation as per IS-2062,Galvanization as per IS-4759/2629 Make of pole- Bajaj / Jindal

All as per Item NO 18.92 above but 7 mtr long

M & L for painting lines, dashes, arrows, letters, etc. on roads pavements and the like n exc 10cm wide with road marking white thermoplastic paint as per manufacturers instructions white or golden yellow complete all as specified and directed

PK Constructions