PHER/01 of 2024-25

Amount

P/f of 3 core Submersible Cable 4 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3 core Submersible Cable 6 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3 core Submersible Cable 10 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3 core Submersible Cable 16 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3 core Submersible Cable 25 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable 7/16 (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable 19/16 (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable 37/16 (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable 37/14 (Rate to be quoted by the Contractor/Firm)

P/f Of PVC Copper Cable Multi Core 10 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 16 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 25 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 35 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 50 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 70 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 95 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 120 mm² (Rate to be quoted by the Contractor/Firm)

P/f of PVC Copper Cable multi core 150mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 50mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 70 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 95 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 120 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 150 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 185 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 240 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 300 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 400 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Single core Aluminium Cable Armoured 600 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 50 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 70 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 95 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 120 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 150 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 185 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 240 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 300 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 400 mm² (Rate to be quoted by the Contractor/Firm)

P/f of 3½ core Aluminium Cable Armoured 600 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 10 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 16 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 25 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 35 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 70 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 95 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 120 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 150 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 185 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Copper Thimbles 240 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 50 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 70 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 95 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 120 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 150 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 185 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 240 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 300 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 400 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Aluminium Thimbles 600 mm² (Rate to be quoted by the Contractor/Firm)

P/f of Moving/fixed Contact for 40/50HPoil immersed star delta starter (Rate to be quoted by the Contractor/Firm)

P/f of HRC Main Switch 200 Amps (Rate to be quoted by the Contractor/Firm)

P/f of HRC Main Switch 320/300 Amps (Rate to be quoted by the Contractor/Firm)

P/f of HRC Main Switch 400 Amps (Rate to be quoted by the Contractor/Firm)

P/f of HRC Main Switch 630/600 Amps (Rate to be quoted by the Contractor/Firm)

P/f of HRC Main Switch 800 Amps (Rate to be quoted by the Contractor/Firm)

P/f of HRC Main Switch 1000 Amps (Rate to be quoted by the Contractor/Firm)

P/f of MCCB 100 Amps 3 Pole (Rate to be quoted by the Contractor/Firm)

P/f of MCCB 250 Amps 3 Pole (Rate to be quoted by the Contractor/Firm)

P/f of MCCB 400 Amps 3 Pole (Rate to be quoted by the Contractor/Firm)

P/f of MCCB 630 Amps 3 Pole (Rate to be quoted by the Contractor/Firm)

P/f of MCCB 800 Amps 3 Pole (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -50 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -80 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -110 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -140 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -185 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -225 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -300 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -400 (Rate to be quoted by the Contractor/Firm)

P/f of Contractors MNX -550 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -50 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -80 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -110 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -140 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -185 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -220 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -300 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -400 (Rate to be quoted by the Contractor/Firm)

P/f of over load relay for MNX -550 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-50 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-80 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-110 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-140 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-185 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-225 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-300 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-400 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor coil MNX-550 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-50 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-80 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-110 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-140 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-185 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-225 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-300 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-400 (Rate to be quoted by the Contractor/Firm)

P/f of Contractor kit MNX-550 (Rate to be quoted by the Contractor/Firm)

P/f of single phase preventer (Rate to be quoted by the Contractor/Firm)

P/f of phase indicator set R/Y/B (Rate to be quoted by the Contractor/Firm)

P/f of aluminum bus-Bar 25x5mm/40mmx5mm/50mmx5mm (Rate to be quoted by the Contractor/Firm)

Repair to 20HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 25HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 30HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 40HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 50HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 60HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 75HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 100HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 120HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 150HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 160HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 300HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

Repair to 350HP motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site (Rate to be quoted by the Contractor/Firm)

P/f of Star Coupling Complete L-150 (Rate to be quoted by the Contractor/Firm)

P/f of Star Coupling Complete L-190 (Rate to be quoted by the Contractor/Firm)

P/f of Star Coupling Complete L-226 (Rate to be quoted by the Contractor/Firm)

P/f of Star Coupling Complete L-290 (Rate to be quoted by the Contractor/Firm)

P/f of Rubber Coupling L-150 (Rate to be quoted by the Contractor/Firm)

P/f of Rubber Coupling L-190 (Rate to be quoted by the Contractor/Firm)

P/f of Rubber Coupling L-226 (Rate to be quoted by the Contractor/Firm)

P/f of Rubber Coupling L-290 (Rate to be quoted by the Contractor/Firm)

P/f of Pin Bush Coupling 7” (Rate to be quoted by the Contractor/Firm)

P/f of Pin Bush Coupling 8” (Rate to be quoted by the Contractor/Firm)

P/f of Coupling Bolt 13/17mm (Rate to be quoted by the Contractor/Firm)

P/f of Dholki Bush 13/17 mm (Rate to be quoted by the Contractor/Firm)

P/f of Gland Packing of size 8 mm,10mm, 12mm (Rate to be quoted by the Contractor/Firm)

P/f of Rotor Switches 5”x5” (Rate to be quoted by the Contractor/Firm)

P/f of Rotor Switches 6”x6” (Rate to be quoted by the Contractor/Firm)

P/f of Rotor Switches 8”x8” (Rate to be quoted by the Contractor/Firm)

P/f of Rotor Switches 10”x10” (Rate to be quoted by the Contractor/Firm)

P/f of Rotor Switches 12”x12” (Rate to be quoted by the Contractor/Firm)

P/f of Ampere meter (Analog) 200/5 A with CT (Rate to be quoted by the Contractor/Firm)

P/f of Ampere meter (Analog) 400/5 A with CT (Rate to be quoted by the Contractor/Firm)

P/f of Ampere meter (Digital) 200/5A with CT (Rate to be quoted by the Contractor/Firm)

P/f of Ampere meter (Digital) 400/5A with CT (Rate to be quoted by the Contractor/Firm)

P/f of Ampere meter (Digital) 600/5A with CT (Rate to be quoted by the Contractor/Firm)

P/f of Ampere meter (Analog) 600/5A with CT (Rate to be quoted by the Contractor/Firm)

P/f of Voltmeter Analog (Rate to be quoted by the Contractor/Firm)

P/f of Voltmeter Digital (Rate to be quoted by the Contractor/Firm)

Rewinding of copper wound coil of following capacity voltage stabilizer including dismantling of stabilizer and fitting at site after repairing are:_ i) 63KVA (Rate to be quoted by the Contractor/Firm)

ii) 100KVA

iii) 150KVA

iv) 200KVA

vi) 300KVA

vii) 400KVA

viii) 630KVA

P/f of Changeover Switch 100A 3Pole Panel mounted

P/f of Changeover Switch 200A 3Pole Panel mounted

P/f of Changeover Switch 300A 3Pole Panel mounted

P/f of Changeover Switch 400A 3Pole Panel mounted

P/f of Changeover Switch 600A 3Pole Panel mounted

P/f of LT Brass rod for 63 /100KVA Transformer

P/f of LT Brass rod for 250 KVA Transformer

P/f of LT Brass rod for 400 KVA Transformer

P/f of LT Brass rod for 630 KVA Transformer

P/f of HT bush for 63/100/250/400/630 KVA Transformer

P/f of aluminum HT coil for 63/100/250/630 KVA at site

P/f of aluminum LT coil for 63/100/250/630 KVA at site

P/f of Copper HT coil for 250/400/630KVA at site

P/f of Copper LT coil for 250/400/630KVA at site

Reconditioning of LT coil

P/f of gasket and other sundry items for Transformers 63 to 630 KVA at site

Welding to oil tank 63 to 630KVA at site

Labourand carriage for repairing of following Transformer at site i) 63KVA Capacity

ii) 100KVA Capacity

iii) 250KVA Capacity

iv) 400KVA Capacity

v) 630KVA Capacity

P/f of Transformer Oil in transformer/ Voltage stabilizer at site

P/f of LT bush for 63K/100VA transformer at site

P/f of LT bush for 200/400KVA transformer at site

P/f of PVC Flexible Pipe 50mm

P/f of Link Set for Substations

P/f of GO/DO set for Substations

Rubber insertion Sheet

Leather sheet

P/f of Sluice Valve 50mm Ǿ cast steel (PN 1.6)

P/f of Sluice Valve 65mm Ǿ cast steel PN 1.6

P/f of Sluice Valve 80mm Ǿ caststeel PN 1.6

P/f of Sluice Valve 100mm Ǿ cast steel PN 1.6

P/f of Sluice Valve 125mm Ǿ cast steel PN 1.6

P/f of Sluice Valve 150mm Ǿ cast steel PN 1.6

P/f of Sluice Valve 200mm Ǿ cast steel PN 1.6

P/f of NRV 50mm Ǿ cast steel PN 1.6

P/f of NRV 65mm Ǿ cast steel PN 1.6

P/f of NRV 80mm Ǿ cast steel PN 1.6

P/f of NRV 100mm Ǿ caststeel PN 1.6

P/f of NRV 125mm Ǿ cast steel PN 1.6

P/f of NRV 150mm Ǿ cast Isteel PN 1.6

P/f of NRV 200mm Ǿ caststeel PN 1.6

P/f of Sluice Valve 50mm Ǿ cast Iron (Heavy Duty)

P/f of Sluice Valve 65mm Ǿ cast Iron (Heavy Duty)

P/f of Sluice Valve 80mm Ǿ cast Iron (Heavy Duty)

P/f of Sluice Valve 100mm Ǿ cast Iron (Heavy Duty)

P/f of Sluice Valve 125mm Ǿ cast Iron (Heavy Duty)

P/f of Sluice Valve 150mm Ǿ cast Iron (Heavy Duty)

P/f of Sluice Valve 200mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 50mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 65mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 80mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 100mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 125mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 150mm Ǿ cast Iron (Heavy Duty)

P/f of NRV 200mm Ǿ cast Iron (Heavy Duty)

Repairing of cast steel valve 50mm Ǿ with finishing and polishing

Repairing of cast steel valve 65mm Ǿ with finishing and polishing

Repairing of cast steel valve 80mm Ǿ with finishing and polishing

Repairing of cast steel valve 100mm Ǿ with finishing and polishing

Repairing of cast steel valve 125mm Ǿ with finishing and polishing

Repairing of cast steel valve 150mm Ǿ with finishing and polishing

Repairing of cast steel valve 200mm Ǿ with finishing and polishing

Repairing of cast steel valve 300mm Ǿ with finishing and polishing

Repairing of cast steel NRV 50mm Ǿ with finishing and polishing

Repairing of cast steel NRV 65mm Ǿ with finishing and polishing

Repairing of cast steel NRV 80mm Ǿ with finishing and polishing

Repairing of cast steel NRV 100mm Ǿ with finishing and polishing

Repairing of cast steel NRV 125mm Ǿ with finishing and polishing

Repairing of cast steel NRV 150mm Ǿ with finishing and polishing

Repairing of cast steel NRV 200mm Ǿ with finishing and polishing

Repairing of cast steel NRV 300mm Ǿ with finishing and polishing

Welding of MS/GI pipe 15 to 50mm dia to make leak proof

Welding of MS/GI pipe 65mm dia to make leak proof

Welding of MS/GI pipe 80mm dia to make leak proof

Welding of MS/GI pipe 100mm dia to make leak proof

Welding of MS/GI pipe 125mm dia to make leak proof

Welding of MS/GI pipe 150mm dia to make leak proof

Welding of MS pipe 200mm dia to make leak proof

Welding of MS pipe 300mm dia to make leak proof

Welding of MS pipe 600mm dia to make leak proof

P/f of MS flange 50mm with nut bolts

P/f of MS flange 65mm with nut bolts

P/f of MS flange 80mm with nut bolts

P/f of MS flange 100mm with nut bolts

P/f of MS flange 125mm with nut bolts

P/f of MS flange 150mm with nut bolts

P/f of MS flange 200mm with nut bolts

P/f of MS flange 300mm with nut bolts

P/f of short bend 50mm

P/f of short bend 65mm

P/f of short bend 80mm

P/f of short bend 100mm

P/f of short bend 125mm

P/f of short bend 150mm

P/f of short bend 200mm

P/f of long bend 50mm

P/f of long bend 65mm

P/f of long bend 80mm

P/f of long bend 100mm

P/f of long bend 125mm

P/f of long bend 150mm

P/f of long bend 200mm

Patch Roll

Adhesive Tape

HCP Type pumps Repairing of pump shaft by jointing welding & turning to bearing size. (Rate to be quoted by the Contractor/Firm)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (4 Stage Pump)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (2 Stage Pump)

Providing and fitting of C.I Impeller

Providing and fitting of brass Impeller

Repairing of brass Impeller

Repairing of C.I Impeller

Fabrication & fitting of neck ring.

Fabrication & fitting of diffuser

Fabrication of Stainless steel gland bush

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plate

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing & Fitting of Oil seal

Replacement of bearing 6410 with new one

Replacement of bearing Nu210 with new one

Replacement of Roller bearing-410 with new one

P/f of balancing plate

Providing & Fitting of Heavy Duty Coupling Pulley set

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling / fitting of Pump

HCP Type pumps Repairing of pump shaft by jointing welding & turning to bearing size. (Rate to be quoted by the Contractor/Firm)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (5 Stage Pump)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (6 Stage Pump)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (7 Stage Pump)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (8 Stage Pump)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (9 Stage Pump)

Providing, Fabrication & fitting of new SS pump shaft as per size and specification. (10 Stage & above Pumps)

Providing and fitting of Brass Impeller

Providing and fitting of C.I Impeller

Repairing of brass Impeller

Repairing of C.I Impeller

Fabrication & fitting of neck ring.

Fabrication & fitting of diffuser

Fabrication of Stainless steel gland bush

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plate

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of bearing-7311 with new one

Replacement of bearing-7307 with new one

Replacement of bearing-7308 with new one

Replacement of bearing-7309 with new one

Replacement of sleeve H-307 with new one

Replacement of bearing-N-308 with new one

Replacement of bearing-N-309 with new one

Replacement of bearing-6308 with new one

Replacement of bearing 206 with new one

Replacement of bearing 210 with new one

Replacement of bearing sleeve 310 with new one

Electric Heater

Providing & Fitting of Oil seal

Providing & Fitting of Heavy Duty Coupling Pulley set

Providing & Fitting Coupling bolts nuts & rubber bushes.

P/f of balancing plate

Dismantling / fitting / carriage of Pump

Submersible Pump set Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/f of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor & coupled with pump , lowering/un lowering & testing in the test pit. (Rate to be quoted by the Contractor/Firm)

Repairs to V-8 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump, lowering/un lowering & testing in the test pit. & testing in the test pit. (Rate to be quoted by the Contractor/Firm)

Repairs to 5/6HP submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump , lowering/un lowering & testing in the test pit.& testing in the test pit. (Rate to be quoted by the Contractor/Firm)

Repairing of Submersible Pump V-8 Repairing of pump shaft (Rate to be quoted by the Contractor/Firm)

Fabrication of pump shaft

Fabrication of Neck Ring

Fabrication of Brass Impeller

Repairs to Impellers

Fabrication of Body Bushes

Fabrication of Guide Bush

Fabrication of Spacer Bush

Providing of Cotter

Fabrication of Pump Body

Providing of Suction Body

Providing of NRV with adaptor

Labour Charges for dismantling and fitting of pump

Repairing of Submersible Pump V-6 Repairing of pump shaft (Rate to be quoted by the Contractor/Firm)

Fabrication of pump shaft

Fabrication of Neck Ring

Fabrication of Brass Impeller

Repairs to Impellers

Fabrication of Body Bushes

Fabrication of Guide Bush

Fabrication of Spacer Bush

Providing of Cotter

Fabrication of Pump Body

Providing of Suction Body

Providing of NRV with adaptor

Labour Charges for dismantling and fitting of pump

Fabrication & providing of 80 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of 65 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of 100 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of 50 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of MS Clamp 3"

Fabrication & providing of MS Clamp 4"

Providing of Grease (Rate to be quoted by the Contractor/Firm)

Providing of M-oil (Rate to be quoted by the Contractor/Firm)

MS Nut bolt and washers (Rate to be quoted by the Contractor/Firm)

P/f of LED flood light 40Watt (Rate to be quoted by the Contractor/Firm)

P/f of LED bulb 9/10watt (Rate to be quoted by the Contractor/Firm)

Tool- tackles of following size (Rate to be quoted by the Contractor/Firm)

Plier (Rate to be quoted by the Contractor/Firm)

Spanner Set (Rate to be quoted by the Contractor/Firm)

Pipe Wrench 14 inch (Rate to be quoted by the Contractor/Firm)

Pipe Wrench 18 inch (Rate to be quoted by the Contractor/Firm)

Pipe Wrench 24inch (Rate to be quoted by the Contractor/Firm)

Screw Driver small/large (Rate to be quoted by the Contractor/Firm)

Crow bar (Rate to be quoted by the Contractor/Firm)

Hammer with handle (Rate to be quoted by the Contractor/Firm)

Pick axes (Rate to be quoted by the Contractor/Firm)

chisel (Rate to be quoted by the Contractor/Firm)

Ring spanner 16 to 32 (Rate to be quoted by the Contractor/Firm)

Chain block 3Ton of reputed make (Rate to be quoted by the Contractor/Firm)

Supplying of Skilled Labour (Electrician/Mason/Welder/Fitter) (Rate to be quoted by the Contractor/Firm)

Supplying of Semi-Skilled labour (Rate to be quoted by the Contractor/Firm)

Supplying of Un-Skilled labour (Rate to be quoted by the Contractor/Firm)

Hiring of tractor/trolley for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shal be providede by the contractor

Hiring ofwater tanker for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shal be providede by the contractor

Hiring of tractor/trolley for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shal be provided by the departement

Hiring ofwater tanker for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shal be providede by the departement

Hiring of Light Motor Vehicle for carriage of goods/mechanics (Rate to be quoted by the Contractor/Firm)

Providing and fixing MS. pipes complete with MS. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore

Providing and fixing MS pipes complete with MS fittings excluding trenching and refilling etc. (external work) 125 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 150 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 200 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 250 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 300 mm dia. nominal bore

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Hard rock without blasting

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Extra rates for quantities of works executed : In or under water and/ or liquid mud, including pumping out water as required

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

DAMP PROOF COURSE Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Extra for concrete work in superstructure above floor five level for each four floors or part thereof.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 15 and 20mm dia pipes all class

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 25 mm and 32 mm dia. G.I. pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 40 mm and 50 mm dia. G.I. pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 65 mm and 80 mm dia. G.I. pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm and 150 mm dia. G.I. pipes

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 25 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 32 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 65 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 150 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 100 mm nominal bore

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 80 mm dia.

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm dia.

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 125 mm dia.

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 150 mm dia.

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 200 mm

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 250 mm

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 300 mm

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 25 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 32 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 65 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 150 mm dia. nominal bore

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 20mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 32mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 40mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 50mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 65mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 80mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 100 mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 20mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 32mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 40mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 50mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 65mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 80mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 100 mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 20mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 32mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 40mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 50mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 65mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 80mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 100 mm dia

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 40 mm nominal bore and above.

Dismantling MS. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 40 mm nominal bore to 65 mm.

Dismantling MS. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 65 mm nominal bore to 100mm.

Dismantling MS. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 100 mm nominal bore and above.

Carraige of MS/GI Pipes by HL in Aadhkwari Sector by HL

Carraige of material i.e. Sand/aggregate/pipes/cement and other items by MT on SMVDSB Track by tractor

Carraige of material i.e. Sand/aggregate/pipes/cement and other items by MT on SMVDSB Track by mahindra pick up

Carraige of MS/GI Pipes by HL in Bhawan Sector by HL

Carraige of cement by HL in Bhawan Sector by HL

Carraige of cement by HL in Aadhkwari Sector by HL

Carraige of sand by HL in Bhawan Sector by HL

Carraige of sand by HL in Aadhkwari Sector by HL

Carraige of aggregate by HL in Bhawan Sector by HL

Carraige of cement by pony in Bhawan/aadhkwari Sector

Carraige of sand/aggregate by pony in Bhawan/aadhkwari Sector

Carraige of aggregate by HL in Aadhkwari Sector by HL

PARVEEN ENGINEERING WORKS