Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC | L1 | Accepted-AOC Agreement Executed | |
| 2 | L2₹8.1 L+₹28,037.70 (3.60%)Rejected-Finance LSGD PANDALAM BLOCK PANCHAYATH KULANADA P O | ALAPPUZHA | KERALA | 686102 | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | PRABHA.M.V L2 | P SREEKUMAR L1 |
|---|---|---|---|---|---|
| 1.00maintenance | |||||
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.08 | cum | 9,250 ₹19,203 | 9,100 ₹18,891.6 Lowest |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 7.95 | cum | 7,750 ₹61,589.25 | 7,650 ₹60,794.55 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 110.16 | sqm | 380 ₹41,861.94 | 360 ₹39,658.68 Lowest |
| 1.00 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | 124.56 | sqm | 200 ₹24,912.6 | 195 ₹24,289.79 Lowest |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 107.09 | kg | 600 ₹64,252.2 | 580 ₹62,110.46 Lowest |
| 1.01 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 15 | kg | 720 ₹10,800 | 700 ₹10,500 Lowest |
| 1.01 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 2.55 | sqm | 1,230 ₹3,138.96 | 1,200 ₹3,062.4 Lowest |
| 1.01 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 52.28 | sqm | 1,690 ₹88,353.2 | 1,620 ₹84,693.6 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 113.4 | kg | 200 ₹22,680 | 182 ₹20,638.8 Lowest |
Tender Value
₹7.9 L
EMD Value
₹19,799
Closing Date
30 Sept 2025, 3:00 pmClosed
Assistant Engineer
Office of the Assistant executive engineer LID and EW Subdivision Pandalam
Annual Plan-2025-26 Pandalam Block Pancayath Project No. 173/26.-Improvements Of Vallana CHC Janakeeyarogya Kendram Main Centre
2025_LSGD_799276_4
03/2025/AE/LID AND EW/PDMBP
Open Tender
Civil Works - Buildings
Item Rate
240 days
pandalam BP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,750
Yes
₹19,799
Yes
11 Nov 2025
20 Sept 2025
4 Oct 2025
20 Sept 2025
30 Sept 2025
20 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1325837.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .