Procurement of workshop tools for gadarw

CARBIDE TIP TOOL ISO1R 1616 K20; IS13742

CARBIDE TIP TOOL ISO1R 2020 K20; IS13742

TUN CARBIDEBRAZED TIP TOOL;ISO1R2525;P10

STRAIGHT TURNING TOOL :ISO1L2020P30

CRANK.TURN&FACING:,ISO2R2020P30(S4)C16

CRANKED TURNING&FACINGTOOLISO2L3232P30

TURNING & FACING TOOL 2R.11.12525 P30/54

CRANKED FACING TOOL ISO-5R 3232 P30

TURNING AND FACING TOOL ISO3HR2020,K20

TUN CARBIDE TIPPED TOOL;ISO3RH2525;K20

TUN CARBIDETUR&FACING;ISO3L3220;P30

TURNING & FACING TOOL;IS03;R3220P40

CRANK TURNING & FACING TOOL IS 03 L 4040

CRANKED TURNING & FACING TOOL 1503R4040

CRANK RDNOSETURN:R-115-1616 K20/H20

CRANKED ROUND NOSE TURNING 115 32X20X170

CRANKED FINISHING TOOLS ISO-3R 2525 P30

CRANKD TURNNBG&FACING TOOL ISO3L1616 P30

CRANKED FINISHING TOOL ISO-3R 1616 P30

BORINGAND FACING TOOL ISO9R0808P30

BORING AND FACING TOOL ISO9R1010P30

BORING & FACING BAR ISO9R 12X12X180

CARBIDE TIP TOOL ISO9R1616 P30

TUN CARBIDE BOR&FACING;ISO9R2020;K20

BORING BAR 25X300,150-9-R1352525P38

CRANKED ROUND NOSE TURNING TOOL,1616 K20

TUN CARBBOR&FACING ISO9;32X32X160K20

BORING BAR TOOL;K20/H20;25X25X300MM

TUNGSTEN CARBIDE TOOL ISO-9;32X32 P-30/S

INTERNAL THREADING TOOL 166,P20 10X10 MM

R 166 12 P30 INTERNAL THREADING TOOL

INTERNAL THREADING TOOL R166;16X16X140

INTERNAL THREADING TOOL R-166 11 P30, 20

INTERNAL THREAD TOOL SIZE-25X25X180

INTERNAL THREAD TOOL SIZE 32X32X200

EXT-THREADING IND2R60DEG;25X25X140

EXTTHREAD ;IND2R60DEG2020,FT18,P10

PARTING TOOL ISO7R16X16X110

PARTING OFF TOOL ISO 7R 2516 P 30

PARTING OFF TOOL ISO 7R 2012 P 40

TUN CARBIDE PARTINGTOOL ISO7R 2012X125

PARTING OFF TOOL ISO7L2012P30

PARTNG TOOL ISO7L2516(P30)SANDVK OR EQVT

PARTING OFF TOOL ISO7R3220P30

CRANKED RECESSING TOOL 156R-1212P30

CRANKED RECESSING TOOL 156R-1616-P30

CRANKED TURNING & FACING TOOL WITH TIP

TURNG&GROVNG TOOL`V'PRFIL-90,1632020 P30

TURNG&GRVNG TOOL`V'PRFIL60 DRG1632020P30

TURNG&GRVNG TOOL`V'PRFIL90 DRG1632525P30

TURNG&GRVNG TOOL`V'PRFIL60 DRG1631616P30

END MILL CUTTER PARALL SHANK SIZE 4 MM

IS:6353 END MILL , P.S -A 6MM

END MILL CUTTER PARALL SHANK SIZE 8 MM

SLOT MILLING CUTTER,SIZE:10MM

HSS PARALLEL SHANK SLOT MILLING CUTTER

HSS PARALLEL SHANK ENDMILL CUTTER 18MM

HSS END MILL CUTTER PARALLEL SHANK,24MM

HSS STRAIGHT MILLING CUTTER 25X125X25MM

SOLID CARBIDE-HC END MILL CUTTER DIA 4MM

SOLID CARBIDE-HC END MILL CUTTER DIA 6MM

SOLID CARBIDE-HC END MILL CUTTER DIA 8MM

SOLID CARBIDE-HC END MILL CUTTER DIA10MM

SOLID CARBIDE-HC END MILL CUTTER DIA12MM

SOLID CARBIDE-HC END MILL CUTTER DIA14MM

SOLID CARBIDE-HC END MILL CUTTER DIA16MM

HSS PARALLEL SHANK END MILL CUTTER 20 MM

HSS STRAIGHT MILLING CUTTER 16X90X16MM

INDEXABLE END MILL CUTTER,16MM

INSERT FOR SLITTING CUTTER CARBIDE TIP

TTR SPKN 1203 EDR

TTR TPKN 2204 PDR

MILLING INSERT TPAN 1103 PPN.

HSS SQUARE TOOL BIT,6X6X100MM

HSS SQUARE TOOL BIT,SIZE-8MMSQ X 100MM

HSS GROUNG TOOL BITS, 4X4X75MM

HSS SQUARE TOOL BIT,SIZE-10MMSQ X 100MM

HSS SQ TOOL BIT 10% CO&18% TG,16SQ*100MM

HSS SQ TOOL BIT WITH 8%,COBALT 3/4 X 6"

HSS TOOL BITS BLANKS 8X-SQUARE 25X200MM

HSS GROUND TOOL BITS, 1"X1"X8"

HSS TAPER SHUNK TWIST DRILL BIT 30 MM

HSSMORSETAPERSHANKTWISTDRILL;50MM

HSS TAPER DRILL (IS-5103/69)-25 MM

HSS CENTER DRILL 5MM/ BODY 12.5MM

HSS CENTER DRILL 6.3MM/BODY 16MM

HSS CENTER DRILL 1.25MM/BODY 3.15MM

HSS CENTER DRILL 2.5MM/BODY 6.3MM

HSS CENTER DRILL 2MM/BODY 5MM

HSS CENTER DRILL 3.15MM/BODY 8MM

HSS CENTER DRILL 4MM/BODY 10MM

HSS CENTER DRILL 8MM/BODY 20MM

AMAZON CUTTING TOOLS

TOOLS AND TOOLS (INDIA)

FUTECK SALES

AMAZON CUTTING TOOLS

FUTECK SALES