KCMC-Water Supply Drianage Fund-2024-24

Amount

Supply and delivery of 100 mm dia G I Pipes (Medium) As Per Is 1239/Part I/2004 as directed by the departmental officers.

Hire charges for deploying earth moving machinery JCB for earthwork including diesel, oil and labour charges etc., complete

Lowering GI pipes and specials in the trenches and laying to proper grade and alignment, jointing with GI Specials and as directed by the departmental officers.

Welding of 100 mm dia GI pipes as directed by the departmental officers for the sizes

Supply and delivery 100 mm dia of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS- 638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete.

Interconnecting the 450 mm AC pipes with MS pipe on both ends using 457 mm dia MS pipe including cost of MS plates fabrication charges and painting with anti-corrosive paints etc complete

Supply and delivery 457X6.3 tk of requires size of M.S. Pipes- spiral/ longitudinal welding as per is 3589/2001with internal lining and external coating made with fe410 as directed by the Department officers

Lowering of MS Pipes and specials in thetrenches and laying to proper rade andalignment and as directed by the department officers

Supply of MS spiral welded saw pipes - mm OD x mm WR confriming to I.S 3589/2001 made with H.R coll conforming to l.a 2026 Ro 410 grade in double random length with bevelled / plain ends

Hire Charges for 62.5 KVA Diesel Generator for lighting, Grinding machine and Welding machine work including cost of fuel and operator bata etc complete

Supply and delivery 100 mm dia G.I. Flange set as directed by the department officers.

Supply and delivery of 100 mm dia bend as directed by the department officers

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed

Plain Cement Concrete 1:5:10 (one part of cement, five part of Crushed Stone Sand (M- Sand) and Ten part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specificatio

ASV CONSTRUCTION (BID ID -1172419)